What I did today...

[Metal-Man]

Yah man, as soon as I put them together

These are such a nice bit of kit!!

Oh, the importer mentioned they had a Matris R6 steering damper in stock, if anyone is interested. $695


Sent from my iPhone using Tapatalk

ooooh nice

[Turtle]

Did some shopping today, and picked a couple nice piece.
-my original snowflake screen arrived from Kawasaki as they forgot to send it out with the bike haha.

-Set of Rizoma pick ups
-TechSpec grip pads
-New sprocket to drop a tooth on the front

20160123_190010.jpg
20160123_185915.jpg
20160123_185926.jpg
20160123_185941.jpg

[Marshy]

It's really a very very nice bike!

[Turtle]

It's really a very very nice bike!

Come take it for a spin hahaha

[zoidberg]

Did some shopping today, and picked a couple nice piece.
-my original snowflake screen arrived from Kawasaki as they forgot to send it out with the bike haha.

-Set of Rizoma pick ups
-TechSpec grip pads
-New sprocket to drop a tooth on the front

20160123_190010.jpg
20160123_185915.jpg
20160123_185926.jpg
20160123_185941.jpg

Very nice mate! Up until the current model, I haven't wanted a ZX10 since the 04-05 model, but man, that is one sweet ride! Top stuff.

[Marshy]

can i come an pick them up, can I, can I??

Drooooooooooooooooooooooooolllllllllllllllllllllll !!!!!!

Done. And damn they feel awesome!!




Sent from my iPhone using Tapatalk

[Metal-Man]

finished it off completely today (apart from sponsor decals and my "metal-man" decal (which will go thru the large black section on sides)

I know I said I wouldn't post pic, but I knew u kunts can't wait so.

IMG_0429.JPGIMG_0433.JPGIMG_0434.JPGIMG_0439.JPG

[triumph]

looks nice mate.
l

[Turbo]

Nice work, Cam!
Look forward to hearing how the Matris go

[Marshy]

That is beautiful!!


Sent from my iPhone using Tapatalk

[Metal-Man]

the other thing thats bugging me now, is the Master Cylinder I got from Tim SBS on facebook, is weeping brake fluid at the bleed nipple. Already messaged him about it, and he said to see if there is anything that could be stopping it from seating properly, and suggested take the nipple off and have a look.
Well I did that, but couldn't see anytjing that would constitute a leak, so I sprayed it wil brake cleaner an dried it off, an reinserted the nipple, re-bled the system, and cable tied front brake lever on (to add pressure).
After dinner I check it again, and it was still weeping, but not as bad, but still weeping nonetheless.

[triumph]

try replacing the bleed nipple and see if that works .

[Phat3R]

finished it off completely today (apart from sponsor decals and my "metal-man" decal (which will go thru the large black section on sides)

I know I said I wouldn't post pic, but I knew u kunts can't wait so.

IMG_0429.JPGIMG_0433.JPGIMG_0434.JPGIMG_0439.JPG

Nice looking bike Cam.

[Little Mick]

looking sweet Cam

[chicken16]

Looks great Cam

[Kris]

Finished 95% of the SBK dyno work, time to give it a ride

[Turtle]

Nothing massive, but I'm bored and thought I'd share the piccies. Threw on the World SBK sticker that came with it, and took some shots of the nice blue the titanium exhaust is turning.

9efb17b8-7cc2-4fcb-a827-35b1f6ca1a29.jpg20160125_172959.jpg20160125_173014.jpg

[Marshy]

That exhaust looks awesome! <drooooool> Blued Ti is just a gorgeous material.

[jaswib]

Fitted new Bonamici rearsets and levers i like a short clutch lever so i kept my china lever on. Feels so much better dropped the pegs down heaps and will hopefully let me stretch out a bit.

Sent from my SM-G920I using Tapatalk

[Little Mick]

Made this for the Harris


Sent from my SM-N9005

[Nelso]

Made this for the Harris


Sent from my SM-N9005

Can you convince him to get rid of that CBR600 tail off it? It's a dead set crime to have that work of art you created on such an iconic bike and then have that ridiculous tail on it.

[Little Mick]

I prefer the cafe racer tail myself

Sent from my SM-T355Y using Tapatalk

[Metal-Man]

done a little printing an decal application ... well Adam Edge did (metal-man decal an front number board)
I got home today an done the rest :p

and that front master cyl bleed nipple I had laeaking issues wih, sorted itself out, woohoo!!

BIG THANKS TO SHIPPY FOR DESIGNING THE METALMAN LOGO


IMG_0514.JPGIMG_0516.JPGIMG_0520.JPGIMG_0521.JPGIMG_0531.JPGIMG_0532.JPG

[triumph]

looking good there man .

[Leezx10r]

Looks great. Did you get your pitbull stand in Oz?

[Mr.Ed]

Can you convince him to get rid of that CBR600 tail off it? It's a dead set crime to have that work of art you created on such an iconic bike and then have that ridiculous tail on it.

Can't say I disagree...

[Metal-Man]

Looks great. Did you get your pitbull stand in Oz?

nope

here

www.sportbiketrackgear.com

[Leezx10r]

nope

here

www.sportbiketrackgear.com

Sweet thanks mate

[shippy__]

Sweat az big boss

done a little printing an decal application ... well Adam Edge did (metal-man decal an front number board)
I got home today an done the rest :p

and that front master cyl bleed nipple I had laeaking issues wih, sorted itself out, woohoo!!

BIG THANKS TO SHIPPY FOR DESIGNING THE METALMAN LOGO


IMG_0514.JPGIMG_0516.JPGIMG_0520.JPGIMG_0521.JPGIMG_0531.JPGIMG_0532.JPG

[Turtle]

Picked up a new radiator guard and a tank bag since I commute on her everyday for work. Fits my smokes, wallet, phone, keys, and a can of Mother perfectly.





Sent from my iPhone using Tapatalk

[Marshy]

There's a new sub-forum for this thread, so post there instead! Here it is: http://tarmactalk.com/forum/forumdis...at-I-did-today