And no rewards.......
Their book in web site is up and running, first days September 12 and 13
http://www.smspridedays.com.au/
• Video recorders (GoPro, Sony, etc) are permitted, but must follow the below
guidelines:
1. All camera mountings must securely mounted to manufacturer
specification. No duct tape, bungee cords, suction cups or other
temporary mounts.
2. All cameras must be mounted so as to not create a hazard to the rider or
other riders in the event of a crash or collision.
3. Cameras can be mounted on motorcycles only. No cameras attached to
helmets and / or any other parts of the riders body.
4. All cameras and mounts must be scrutineered with the motorcycle on the
morning of the event, or before being used in the riders first session.
5. There are to be no cables or other attachments between the motorcycle
and rider.
6. Any footage released publicly that is deemed inappropriate to be viewed
(such as crashes and / or situations resulting in serious injuries to
participants) and / or footage that is considered damaging to the venue,
promoter or industry, could result in the banning of the rider from future
SMSP Ride Days.
7. The recovery of any cameras falling from the motorcycle will be at the
discretion of SMSP Ride Days. It is the owner’s responsibility to ensure
the camera is identifiable.
Please note
1. Lap timing is strictly prohibited at SMSP Ride Days: such devices must
be removed from motorcycles prior to accessing to the circuit. Riders found
using lap timing devices risk being removed from the event and potentially
banned from future events.
So whats changed? nothing, just a different booking in method
Last edited by Mstevo; 08-06-2015 at 04:22 PM.
2007 Yamaha FZ1 Championship winner (2012) (the tank)
2007 Yamaha FZ1 Road bike
2005 KTM 450 EXC (fun bike)
2005 Yamaha R1 Class winner 2014
No idea which layouts they're running either...
Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks