What I did today...

[Marty]

ImageUploadedByTapatalk1392669914.582675.jpg

This is how the POR15 looks brushed on.

[Negrogrande]

Finished putting humpy dumpty together, in future I need to use better masking tape, but will pass 20/20

[Phat3R]

Finished putting humpy dumpty together, in future I need to use better masking tape, but will pass 20/20

Humpty lookz pretty good ... ;-)

[Negrogrande]

Humpty lookz pretty good ... ;-)

Good from far…

[Mazabuzz]

Good from far…

But far from Good

[chubb]

Haha I don't see your bike anywhere Mazabuzz

[Mazabuzz]

Haha I don't see your bike anywhere Mazabuzz

I'll post some picks tomorrow of its current state

[Little Mick]

New home for the toolz n toyz

beige shed.jpg

green shed.jpg

[Mr.Ed]

New home for the toolz n toyz

beige shed.jpg

green shed.jpg

Now that's A LOT of space for a Little Mick!


Ps: 'Breaking Bad' ideas cropped up in my mind

[Little Mick]

Now that's A LOT of space for a Little Mick!


Ps: 'Breaking Bad' ideas cropped up in my mind

Now that's just Crazy Talk!!!

[Phat3R]

WOW ... they are massive ... tools in one and toys in the other???

[Little Mick]

WOW ... they are massive ... tools in one and toys in the other???

probably a combination of both Rick. Once the workshop is set up, will be a treat...

A little less cramped than this one....

IMG-20131125-01088.jpg

IMG-20131125-01084.jpg

in the Picton district so much closer to both tracks as well.

[Phat3R]

Very nice Mick! You'll have to post up some pics when you get the new workshop setup. Interesting to see how you use the acres of space! ;-)

[Little Mick]

Very nice Mick! You'll have to post up some pics when you get the new workshop setup. Interesting to see how you use the acres of space! ;-)

Will do rick. All in the timing 😎

Sent from my SM-N9005 using Tapatalk

[KANGA]

Are those Michelin power cups Mick? I've not met anyone whose run Michelin's before .. then again I haven't met that many people lol Interested in how they go.

[Little Mick]

Are those Michelin power cups Mick? I've not met anyone whose run Michelin's before .. then again I haven't met that many people lol Interested in how they go.

They are mick. I grabbed a couple as a back up last year. I only used one for half a day trying to sort some stuff out. I didnt really give it a chance as my head was elsewhere. I have a brand new one there if you are interested.


Sent from my SM-N9005 using Tapatalk

[KANGA]

They are mick. I grabbed a couple as a back up last year. I only used one for half a day trying to sort some stuff out. I didnt really give it a chance as my head was elsewhere. I have a brand new one there if you are interested.


Sent from my SM-N9005 using Tapatalk

I wish I could justify it but I already have an eclectic mix of bridgestones, dunlops, pirellis and metzlers to get through first lol

[Phat3R]

Wow ... nice ... there looks like there is room in there to swing a couple of cats ...

[Phat3R]

It must be shed building season in the Gong ... ???

[Little Mick]

Move in progress... Keys obtained last Friday..will transition everthing over the next couple of months....
Im now a country resident and starting to set things up to function more effectively

[Leezx10r]

Techspec tank pads
43t sprocket
k-tech 35dds pro

[Marshy]

I've gotta say that the Ktech 35DDS in my Champ bike is still the bestest rear shock I've ever used. It took three rebuilds to get the valving right (it left the factory with almost rebound damping, which was very unusual), and three spring changes, but once sorted it was unbeatable.

[Leezx10r]

I've gotta say that the Ktech 35DDS in my Champ bike is still the bestest rear shock I've ever used. It took three rebuilds to get the valving right (it left the factory with almost rebound damping, which was very unusual), and three spring changes, but once sorted it was unbeatable.

Let's hope I don't have all the problems you had mate with no rebound out the box! But I have heard good stuff about the ktech gear

[chubb]

Fancy. Nice work.

[Carl-52]

IMG_1249.JPGIMG_1262.JPGIMG_1264.JPGIMG_1265.JPGIMG_1266.JPG

What i did today... new race seat!!!!! room to fit my too tallishness now... Thanks Marshy for the fairings! oh and mowed a shitload of grass............

[Marshy]

IMG_1249.JPGIMG_1262.JPGIMG_1264.JPGIMG_1265.JPGIMG_1266.JPG

What i did today... new race seat!!!!! room to fit my too tallishness now... Thanks Marshy for the fairings! oh and mowed a shitload of grass............

Looks unreal mate!!!

[chubb]

Now you just got to deny the old man a position in front of you

[chubb]

Just a plug to say I love Mupo.

Gonna test & tune the GP carts a bit more in preparation for the last round.

[Kris]

Fitted up WSBK Radiator,Dash, EVO3 and WSBK Wiring loom/engine loom

20141018_173645.jpg20141019_161313.jpg20141019_161339.jpg20140918_162406.jpg20140925_165524.jpg20141003_113430.jpg

[chubb]

Fitted up WSBK Radiator,Dash, EVO3 and WSBK Wiring loom/engine loom

20141018_173645.jpg20141019_161313.jpg20141019_161339.jpg20140918_162406.jpg20140925_165524.jpg20141003_113430.jpg

looks awesome!!

[Leezx10r]

That radiator is a work of art!

[Marshy]

Nice!!!!

[Mstevo]

The sweet sound as your bike roars back into life after some open heart surgery :-)
and just in time for a WP ride day this Friday

[chubb]

Day off today Stevo???

[Mstevo]

Day off today Stevo???

Friday...yes

[Leezx10r]

Ktech 35dds pro fitted with new spring
Geometry dialled
Fork oil changed
Just need to work on the riding part now

[Marshy]

Beautiful!!!

[Negrogrande]

New brakes

[Leezx10r]

New brakes

Good job

[Saturnalian]

New brakes

They came up a treat didn't they. I was very happy with that refurb.
You'll love the difference on track. Hows the fit ?

[chubb]

Nice with the R6 calipers

[Marshy]

Do yourself a favour and get some Vesrah SRJL pads to go with those awesome R6 calipers.....

[Mr.Ed]

Do yourself a favour and get some Vesrah SRJL pads to go with those awesome R6 calipers.....

This!! But congrats on new brakes regardless... much neglected area in a lot of bikes I've seen.

[Metal-Man]

put these on ... designed by shippy ... made by RTscreenprint aka Rob Lloyd @ sevo

20141024_130336.jpg20141024_130344.jpg20141024_183403.jpg20141024_183430.jpg

[Marshy]

put these on ... designed by shippy ... made by RTscreenprint aka Rob Lloyd @ sevo

20141024_130336.jpg20141024_130344.jpg20141024_183403.jpg20141024_183430.jpg

That's fricken unreal!!!

I need some stickers done. I will have to give Rob a call.

[Baddie]

That's fricken unreal!!!

I need some stickers done. I will have to give Rob a call.

Not sure on Robs pricing but DrippinWet decals do them for many AMA riders.

www.drippinwet.com

[Metal-Man]

That's fricken unreal!!!

I need some stickers done. I will have to give Rob a call.

if u do, they'll definitely be cheaper cause he does them on the side

Rob Lloyd
Managing Director
RT Screen Printing & Graphics Pty Ltd
Unit 7, 20 Tucks Rd Seven Hills NSW 2147
Ph / Fax 9838 0322
0419 481 063
www.print1.com.au

[Phat3R]

put these on ... designed by shippy ... made by RTscreenprint aka Rob Lloyd @ sevo

20141024_130336.jpg20141024_130344.jpg20141024_183403.jpg20141024_183430.jpg

Noice!

[Metal-Man]

Do yourself a favour and get some Vesrah SRJL pads to go with those awesome R6 calipers.....

$$?? please .. an u supply em too marshy eh?

[Marshy]

Nope. Kurveygirl for the win. Cheaper than STG for R6 ones (and Aprilia too). I just ordered some this morning, by coincidence.