Went out to CBA Engineering AKA Anderson Stands. Had this installed
Pre Modern Formula 1 Champion 2013 (GSXR750T)
www.wet4uracing.com.au Race bike & mechanical prep, fairings and parts - www.bikeshop.com.au (Protech Motorcycles)Tyres, parts and dyno tuning www.stayupright.com.au motorcycle rider training from learners through to track skills - http://worthingtonmotorcycles.com.au BMW, Honda, MV Augusta, Moto Guzzi and Aprilia
Same here. My cursor has a mind of its own. Specially when quoting or editing before posting. Sometimes I just give up or not even attempt in the first place.
No...I'm not loving that and I'm not loving that! But I'm loving this!
http://www.break.com/video/ugc/oran-...il-2009-702765
http://www.break.com/video/ugc/track...d-video-625380
I'm confused Tristan; what is the front stand doing there?
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
Any sharp edge must have a minimum of 3mm beading on it, so as not to cut you. That's from memory of the GCRs.
There's a red front Anderson stand at the front wheel that doesn't look like it's holding up the forks; nor does it look needed, because the wheel chock is holding the bike. Just wondered what it's for.
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
Yeah nick it's just sitting there doesn't do any thing storage lol
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
Took delivery of my new paint for next years look and purchased my new spray booth for $60.00
Attachment 349
Ah so this is how to fund racing.
No...I'm not loving that and I'm not loving that! But I'm loving this!
http://www.break.com/video/ugc/oran-...il-2009-702765
http://www.break.com/video/ugc/track...d-video-625380
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
What I did today....Rode the blade after reinstalling Oem Dash very happy....tried to stop rear tyre from melting with track temp of 73c...went to bikebiz to Mark V new Zx10r....had a up close look at care flight helicopter ( bad crash T11)...
The best part get too do it all again.
Went to see my sponsors Protech Motorcycles for some dyno fine tuning. Outstanding work and great guys to deal with. Dom the owner is ex PTR and real perfectionist. Notice things like rags on the tie down points. That's Damien and Alex Cudlin's bikes in the background, and their family own a bike shop, so says something.
Highly recommended, and I'm not easy to please
Pre Modern Formula 1 Champion 2013 (GSXR750T)
www.wet4uracing.com.au Race bike & mechanical prep, fairings and parts - www.bikeshop.com.au (Protech Motorcycles)Tyres, parts and dyno tuning www.stayupright.com.au motorcycle rider training from learners through to track skills - http://worthingtonmotorcycles.com.au BMW, Honda, MV Augusta, Moto Guzzi and Aprilia
Pre Modern Formula 1 Champion 2013 (GSXR750T)
www.wet4uracing.com.au Race bike & mechanical prep, fairings and parts - www.bikeshop.com.au (Protech Motorcycles)Tyres, parts and dyno tuning www.stayupright.com.au motorcycle rider training from learners through to track skills - http://worthingtonmotorcycles.com.au BMW, Honda, MV Augusta, Moto Guzzi and Aprilia
Well the acrylic rattle can booth has been doing a great job of not covering everything else in my lockup with spray dust.
I can't say the same for not covering myself.
One more fairing to rub the primer back on and into the paint job we go....
Attachment 362
Those days of selling things for other peoples enjoyment.....
Long over.
Is that your lock up at West Gosford?
Pre Modern Formula 1 Champion 2013 (GSXR750T)
www.wet4uracing.com.au Race bike & mechanical prep, fairings and parts - www.bikeshop.com.au (Protech Motorcycles)Tyres, parts and dyno tuning www.stayupright.com.au motorcycle rider training from learners through to track skills - http://worthingtonmotorcycles.com.au BMW, Honda, MV Augusta, Moto Guzzi and Aprilia
Yes. Are you in it now ?
Or are you just playing clever spot the difference games
Just thought it was a good halfway place for my shit. Better than an hour off the freeway to your place
Pre Modern Formula 1 Champion 2013 (GSXR750T)
www.wet4uracing.com.au Race bike & mechanical prep, fairings and parts - www.bikeshop.com.au (Protech Motorcycles)Tyres, parts and dyno tuning www.stayupright.com.au motorcycle rider training from learners through to track skills - http://worthingtonmotorcycles.com.au BMW, Honda, MV Augusta, Moto Guzzi and Aprilia
New place even has it's own guest bathroom. Let's talk about the other if you wish. I should have some
Room in there soon
Sent from my iPhone using Tapatalk
The rebuild begins!
I have fitted my danmoto clipons (never buying again)
Renthals,
New brake reservoir
Bled brakes
Bent rearsets into shape until new ones arrive
And installed a QS
now I only need a fairing stay (ordered) mid pipe (ordered) and a set of slicks and I can go back on track
You didn't consider giving the engine etc a bit of a wash down, so you can check for damage? It's filthy in that first photo!!
Otherwise it's looking great! Often what looks like a total wreck turns out to not be so bad....
Good work. Keep us updated
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
Decided to deck the Van out.
Sent from my iPhone using Tapatalk
Installed one of Marshys Annitori Quick Shifters on the CBR today.Holy cow its like riding an automatic.Flat changes without backing off.Amazing little device.Had to take the side fairings(its a roady) and the airbox off to get to the plug top coils which is always a good patience tester when putting it back together as those bitchy little clips and saddles never go back in the way they came out.Thought i might have been able to get away with getting at it by just removing the airbox but nope.Hooking the QS itself up was the easy part.No wires to cut, plug and play
Big thanks to Nick for supplying on short notice on Friday and for the advice today Cheers mate
Last edited by CBR42; 12-01-2014 at 09:26 PM.
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
You will love it.
I always thought I didn't need a quick shifter but now that I have one I can't live without one!
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
Installed Phat3r's quickshifter, and serviced his shock and forks. The rear shock was ugly inside!
rickQS.jpg
P1070295.jpg
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
now completely set up with my new Bonamici rear sets.
Sent from my iPhone using Tapatalk
There are currently 259 users browsing this thread. (0 members and 259 guests)
Bookmarks