Results 1 to 42 of 42

Thread: Rear brake when cornering.

  1. #1

    Rear brake when cornering.

    In the thumb brake thread something Owen said got me thinking about using the rear brake in the corner to help turn the bike. How many guys do this and when or what type of corners? I started using the rear coming off turns to help keep the front down and has made a big difference to lap times but not so much in the turn to help get it turned. What are people doing they find helps?

  2. #2
    This is what got me looking for a thumb brake in the first place. I WANT to be doing this (rear brake going in, mid corner, and out again),but I can't get my foot on the lever.
    IMA Thumb Brakes! Shop now

    Annitori QS PRO quickshifters Shop now

    Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing


  3. #3
    What type of corners in particular Nick or all corners? I was thinking mainly slower corners, what are others doing?
    .

  4. #4
    I had Alex Cudlin for a one on one coaching day a while back. He really pushes it, I honestly hadn't used it at all till then.
    Rear break at 70% every Cnr he told me. consequently I've started to use it in all cnrs but rights are difficult, very unsettling scraping the toe.

    What I believe, we're the advantages (for me anyway) was Firstly later breaking. )I wasn't using it at all) secondly It settles the bike. Then if your at 70% pressure and running wide you can apply greater pressure to tighten your line.

    There properly heaps more to but that's was how I recall it being explained to me.


    Sent from my iPhone using Tapatalk

  5. #5
    Thanks for that Plumb interesting insight. Definitely worth looking into.

  6. #6
    Senior Member Nelso's Avatar
    Join Date
    Mar 2013
    Location
    Wollongong
    Posts
    391
    Since I have a high seat and higher bar height, I need to use the rear brake before applying the front brake when I'm braking hard, or I pick the rear tyre up too easily. I started using my rear brake a lot more after doing a bit of dirt track; it hasn't made me any faster, but it has helped me to be in more control and handle when things go wrong a lot better.
    2011 ZX10R track/race bike
    ZRX1200 road bike
    Period 6 ZXR 750 race bike
    P6 250 production RMX250 motard race bike
    2015 YZ450F Dirt track/motard
    TE511 trail bike/motard

  7. #7
    Admin Turbo's Avatar
    Join Date
    Feb 2013
    Location
    Brookvale
    Posts
    1,763
    Quote Originally Posted by stevem View Post
    In the thumb brake thread something Owen said got me thinking about using the rear brake in the corner to help turn the bike. How many guys do this and when or what type of corners? I started using the rear coming off turns to help keep the front down and has made a big difference to lap times but not so much in the turn to help get it turned. What are people doing they find helps?
    I didn't use it at all on the R6 but since getting on the BMW it seems essential. I remember overhearing Glenn when Pete Frost had him for a day, just pointing to the whole track pretty much, saying where to use it. If you've ever followed Glenn through a corner or two on his road R1, you can see the brake light come on in all kinds of weird places. Wolfie, I think it was you that told me how many rear pads the Yamahas go through of a weekend!! Mental!!
    My biggest issue, as I mentioned, is my right angle injury that makes using the foot brake pretty tricky. I've high hopes the thumb brake will help!
    Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
    Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62

  8. #8
    The last six months I had the Beemer I was using it on exit of corners and it gained me half a second. I'll have to look into using it mid corner to get it turned cause there is defitely more to be had there.

  9. #9
    I reckon your on the right track Steve as the benefits are many v downside.
    When building my Ninjia was quizzing Sean Condon about his setup.
    He basically said leave it stock as you dont want to lock it,use it wherever you want to settle/turn the bike.
    For his speed that would be a LOT,for me only couple places although i am keen to see if it helps to tidy hard braking into 2.
    Those with Auto blipper and Engine braking control prob have less issues.

  10. #10
    Quote Originally Posted by Plumb View Post
    I had Alex Cudlin for a one on one coaching day a while back. He really pushes it, I honestly hadn't used it at all till then.
    Rear break at 70% every Cnr he told me. consequently I've started to use it in all cnrs but rights are difficult, very unsettling scraping the toe.
    AC was also mentioning this at a track day. I quizzed him on what he does in the right handers. Says he has to twist his foot and use the side of his foot to increase clearance.
    He also mentioned that he has had many opportunities to use a thumb brake but has declined as he reckons he would love it so much that he couldn't go back to a foot brake.

  11. #11
    It took me two years to get used to a quick shifter and now all this. Thanks for the replies guys, good brain food.

  12. #12
    Actually I recall him mentioning that. Oh well when he's crusing around at 35s on a stock Zx10 I suppose he can make just do


    Sent from my iPhone using Tapatalk

  13. #13
    Quote Originally Posted by Krackeye View Post
    AC was also mentioning this at a track day. I quizzed him on what he does in the right handers. Says he has to twist his foot and use the side of his foot to increase clearance.
    He also mentioned that he has had many opportunities to use a thumb brake but has declined as he reckons he would love it so much that he couldn't go back to a foot brake.
    That's a big call hey! Maybe when I do the thumb brake thing, I will piss the foot brake off altogether. I won't miss it, I think I maybe use it every now and then leaving the pits? On the old R1 I used it coming onto the straight to control wheelies, but I haven't even used it on the CBR yet...

    Wolfie was telling me a while back just how often he uses the rear brake.

    Just this year though, since Lorenzo has gone to Ducati, he has started using the rear alot as he NEVER used to use it. All down to personal preference maybe? Seems like a useful tool to have in the bag of tricks though...

    I need me some AC or DC training that's for sure.

  14. #14
    Owen, that conversation between Glenn and I was classified information, please return it forthwith, and forget that you ever heard it......forgettt...forgettttt....forgetttttttttttt t.....


    Sent from my iPhone using Tapatalk
    2012 BMW S1000RR

  15. #15
    Don't worry about Pete Owen he'll forget soon enough , what is that ammonia smell, who am I , oh time for my warm milk. Silly old bugger. So what is actually happening when you apply the rear brake to turn the bike, is it squating the rear end of the bike or why does it work? Sorry Pete.

  16. #16
    Admin Turbo's Avatar
    Join Date
    Feb 2013
    Location
    Brookvale
    Posts
    1,763
    Quote Originally Posted by Petefrost View Post
    Owen, that conversation between Glenn and I was classified information, please return it forthwith, and forget that you ever heard it......forgettt...forgettttt....forgetttttttttttt t.....
    MUAHAHAHAHAHA!!! All the way to the bank...

    Quote Originally Posted by stevem View Post
    Don't worry about Pete Owen he'll forget soon enough , what is that ammonia smell, who am I , oh time for my warm milk. Silly old bugger.
    Bahahaha!! I wasn't even there, Pete! You must have forgotten your glasses.
    Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
    Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62

  17. #17
    Who ever was there......forgetttttttt.........forgetttttttttttt tt...

  18. #18
    Steve, apparently it just settles the bike as it transitions off the front brake, it settles the suspension and magically pulls the bike in to tighten up your line, and generally smooths things out. Don't ask me how....it's just magic....(now you see it...now you don't.....see? Magic. )

  19. #19
    Quote Originally Posted by Petefrost View Post
    Who ever was there......forgetttttttt.........forgetttttttttttt tt...
    That was me, Pete. Wait, was it? I forget.....

    I've tried and tried to reach the foot brake, and it's just not a thing I can do. I really WANT to be using the rear brake (on a litrebike I am TOTALLY reliant on electronics to not loop the bike over backwards), but I seem physically and mentally incapable of using the foot lever. I rode Lee's bike with a thumb brake for a couple of laps, and within half a a lap I was happily (and easily, almost automatically) using the thumb brake! It just feels right, to me.

    The only time I use the foot brake is race starts, and I could probably switch to the thumb pretty easily for that too. Because there's the option to keep the foot brake, I've decided to do so, but if I was more budget conscious I could do without it pretty easily, I reckon.

    For reference, this was me the other day trying out the new dash. I thought wheelie control was on, as normal, and this was the OUTLAP of the first session on a cold cold morning, so totes not accelerating very hard at all, in fourth gear. I would've sworn the electronics on the R1 weren't doing that much for me, especially as they aren't even in the same postcode as being as good as the racing Aprilia electronics. I thought I was goooooone! Thumb brake needed!

    IMA Thumb Brakes! Shop now

    Annitori QS PRO quickshifters Shop now

    Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing


  20. #20
    Who do you think you are Ruckos??? I love that dash... Where is all the telemetry overlay from?

  21. #21
    Quote Originally Posted by zoidberg View Post
    Who do you think you are Ruckos??? I love that dash... Where is all the telemetry overlay from?
    Bahahahaha mines from a cheep Garmin , that dash is next level !!!!


    Sent from my iPhone using Tapatalk

  22. #22
    Nick ,On the beemer I ended up bolting some aluminium onto the rear brake pedal so I could reach it around right handers. It ended up about 25mm higher than stock with the lever at maximum adjustment. I never took any photos of it and not sure if Condor is still using it or not but if he is check it out.

  23. #23
    Quote Originally Posted by zoidberg View Post
    Where is all the telemetry overlay from?
    That's actually the built-in data from the new GoPro Hero 5 Black. Which, had I realised, almost mates the dash superfluous... but then again, those shift lights...... mmmmmmmmmm!
    IMA Thumb Brakes! Shop now

    Annitori QS PRO quickshifters Shop now

    Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing


  24. #24
    Quote Originally Posted by Marshy View Post
    That's actually the built-in data from the new GoPro Hero 5 Black. Which, had I realised, almost mates the dash superfluous... but then again, those shift lights...... mmmmmmmmmm!
    Wait a minute. So the GoPro hero 5 black overlays all the data straight from the camera? Any fancy software?

    Nick do you know what the feature is called on the GoPro? I will check to see if the new session has it, and if not I will grab the hero 5 black


    Sent from my iPhone using Tapatalk

  25. #25
    It's natively inbuilt to the camera. Just activate GPS mode and it does the rest. The only missing feature is a 'lap' function.... it treats multiple laps as one long run, without the ability to specify that you're lapping a circuit. Seems like a very very easy software update, if they could be bothered.
    IMA Thumb Brakes! Shop now

    Annitori QS PRO quickshifters Shop now

    Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing


  26. #26
    Quote Originally Posted by Marshy View Post
    It's natively inbuilt to the camera. Just activate GPS mode and it does the rest. The only missing feature is a 'lap' function.... it treats multiple laps as one long run, without the ability to specify that you're lapping a circuit. Seems like a very very easy software update, if they could be bothered.
    Excellent thanks mate, looks like a hero 5 black it is as the other doesn't have location on it.




    Sent from my iPhone using Tapatalk

  27. #27
    It really is a nice bit of kit. The image stabilisation is good too.
    IMA Thumb Brakes! Shop now

    Annitori QS PRO quickshifters Shop now

    Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing


  28. #28
    Admin Turbo's Avatar
    Join Date
    Feb 2013
    Location
    Brookvale
    Posts
    1,763
    Wow, how's this for some 'when to use' from Scott Redding at Jerez... Looks like flippin everywhere!
    Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
    Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62

  29. #29
    Sorry bit slow on a response - too busy changing nappies!

    I use the rear brake everywhere on a 1000, never used it at all on a 600. It settles the suspension before braking hard into a turn, helps you keep a tight line in a corner, particularly if you have gone in too hot and then keeps the front down on the way out. If you watch someone like Glenn or Alex when they have a rear brake light it is on way before the corner and stays on until well out of the corner, they are just using varying amounts of pressure. In tight right handers like turn 1 at Wakey or turn 9 at EC you need to use the side of your foot which is difficult, faster right handers are fine. I've never thought about a thumb rear brake as I use the rear without thinking about it anymore but it would defo be easier to reach etc, my concern would be whether you still got good feel for the amount of pressure you are applying.
    As someone mentioned though not all pro's use the rear brake so maybe it doesn't necessarily make you quicker, probably just smoother. For someone like me who has never done motocross/dirt track etc I don't like it when it feels out of control so it probably gives me more confidence.
    2017 Suzuki GSXR1000 & 1991 Honda CBR250RR
    Team GASD Racing
    Sponsored by: GASD, ASR Wealth Advisers, MYM Consulting, Woolich, Cutting Edge Motorcycle Paint Shop, ASBG, HELD Australia, JW Moto Parts, Canberra Motorcycle Centre, Suzuki

  30. #30
    Quote Originally Posted by Sicko View Post
    Wow, how's this for some 'when to use' from Scott Redding at Jerez... Looks like flippin everywhere!
    That's fucking awesome! How inspiring is that? I sometimes forget to use it but I'm definitely going to start using it everywhere.


    Sent from my iPhone using Tapatalk
    2012 BMW S1000RR

  31. #31
    Wolfie needs a fumb brake....


    Sent from my iPhone using Tapatalk
    2012 BMW S1000RR

  32. #32

    Rear brake when cornering.

    Quote Originally Posted by Sicko View Post
    Wow, how's this for some 'when to use' from Scott Redding at Jerez... Looks like flippin everywhere!
    So what's more important trailing the rear into a turn or sticking the foot out
    I don't know where to apply my effort now. I'm so confused

    Edit or is there a thumb break in play as well????


    Sent from my iPhone using Tapatalk

  33. #33
    This is why we need thumb brakes!!!


    Sent from my iPhone using Tapatalk
    IMA Thumb Brakes! Shop now

    Annitori QS PRO quickshifters Shop now

    Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing


  34. #34
    Good article about Dovi's thumb brake: http://www.brembo.com/en/company/new...-brembo-brakes
    IMA Thumb Brakes! Shop now

    Annitori QS PRO quickshifters Shop now

    Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing


  35. #35
    Sounds like the perfect compromise, bet it's expensive?
    2017 Suzuki GSXR1000 & 1991 Honda CBR250RR
    Team GASD Racing
    Sponsored by: GASD, ASR Wealth Advisers, MYM Consulting, Woolich, Cutting Edge Motorcycle Paint Shop, ASBG, HELD Australia, JW Moto Parts, Canberra Motorcycle Centre, Suzuki

  36. #36
    Quote Originally Posted by Wolfie57 View Post
    Sounds like the perfect compromise, bet it's expensive?
    $2800!!! And that's with out the valving to retain the foot break. Needless to say I've placed my IMA order already






    Sent from my iPhone using Tapatalk

  37. #37
    Admin Turbo's Avatar
    Join Date
    Feb 2013
    Location
    Brookvale
    Posts
    1,763
    It's not adjustable either. I reckon getting the lever in the right spot is essential to get comfortable with using it fully cranked over etc.
    Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
    Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62

  38. #38
    Jesus, that's insane! I reckon Lee could have a good sideline selling his set up, just need to add the brake pedal......
    2017 Suzuki GSXR1000 & 1991 Honda CBR250RR
    Team GASD Racing
    Sponsored by: GASD, ASR Wealth Advisers, MYM Consulting, Woolich, Cutting Edge Motorcycle Paint Shop, ASBG, HELD Australia, JW Moto Parts, Canberra Motorcycle Centre, Suzuki

  39. #39
    Quote Originally Posted by Wolfie57 View Post
    Jesus, that's insane! I reckon Lee could have a good sideline selling his set up, just need to add the brake pedal......
    When the IMA ones start at $499, why bother making them? The sheer time it would take (not to mention the fabrication facilities and skills) would cost more than the IMA. http://superbikesource.com.au/produc...umb-Brake.html
    IMA Thumb Brakes! Shop now

    Annitori QS PRO quickshifters Shop now

    Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing


  40. #40
    Quote Originally Posted by Marshy View Post
    When the IMA ones start at $499, why bother making them? The sheer time it would take (not to mention the fabrication facilities and skills) would cost more than the IMA. http://superbikesource.com.au/produc...umb-Brake.html
    IMA is quality stuff, love my Triples, you the importer now?
    2017 Suzuki GSXR1000 & 1991 Honda CBR250RR
    Team GASD Racing
    Sponsored by: GASD, ASR Wealth Advisers, MYM Consulting, Woolich, Cutting Edge Motorcycle Paint Shop, ASBG, HELD Australia, JW Moto Parts, Canberra Motorcycle Centre, Suzuki

  41. #41
    Yes mate, we are the importer of IMA Special Parts

    New stock has already arrived (not thumb brakes yet tho) and we will be stocking just about every make and model of parts here in Sydney.
    IMA Thumb Brakes! Shop now

    Annitori QS PRO quickshifters Shop now

    Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing


  42. #42
    Good stuff mate, great brand!

    Going out together again on Sunday didn't seem to work out too well! We'll have to reconvene at the end of July
    2017 Suzuki GSXR1000 & 1991 Honda CBR250RR
    Team GASD Racing
    Sponsored by: GASD, ASR Wealth Advisers, MYM Consulting, Woolich, Cutting Edge Motorcycle Paint Shop, ASBG, HELD Australia, JW Moto Parts, Canberra Motorcycle Centre, Suzuki

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •