All perfect, except that you see the metal ring around the throttle cables down at the demand sensor? That should be screwed in to the top radiator mount.
Looks fine. Just make sure that your throttle moves smoothly. The oem cables are very suspectable to getting twisted/tangled and as a result the throttle sticks. I moved my RBW motor up to the top of the bike
All perfect, except that you see the metal ring around the throttle cables down at the demand sensor? That should be screwed in to the top radiator mount.
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
Farrrrkkkk thats such an effort :(
I was wondering where those metal rings went. Theres one on the other side too that holds the overflow tubes.
The demand sensor metal tubes (that the cables go on) seem pretty close to the radiator. Is that normal?
Kris- thanks i was pretty careful with the throttle cables but there are some others under there that i was too sure of (thermo fans and what not)
Also for some reason i unscrewed the earthing bolt (no idea why i did that when taking the rad???) and think ive put those back correctly. There are 3 wires going to the main earth bolt and and aother smaller one sitting on the frame. Sound right?
2015 MV AGUSTA F3 800
2010 RSV4 FACTORY (TRACK BIKE)
2007 KTM 300EXC
2005 CBR1000RR (TRACK BIKE SOLD)
2004 KTM125SX (SOLD)
2008 YAMAHA R1 (CRASHED)
2002 YAMAHA R6 (SOLD)
The overflow tubes ring is attached by the bolt that holds the reservoir bottle to the rad, IIRC.
The earth attachments are right. The 3 main earths bolt to the motor, and the little piggyback earth goes to the frame.
The cables near the radiator are fine - it's never that hot. Just be careful to keep the reg/rec wires away from the exhaust headers. The headers are quite close to the wiring if you're not careful, and I can tell you from experience that the headers will melt through the wiring in about 10 seconds from dead cold.....
Sent from my iPhone using Tapatalk
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
Yep sound right and one to the engine but doubt you removed that. Yes its fairly normal, just route them so nothing touches thats the main thing. For a track bike, pull the fan out on the side that has the RBW motor
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
2015 MV AGUSTA F3 800
2010 RSV4 FACTORY (TRACK BIKE)
2007 KTM 300EXC
2005 CBR1000RR (TRACK BIKE SOLD)
2004 KTM125SX (SOLD)
2008 YAMAHA R1 (CRASHED)
2002 YAMAHA R6 (SOLD)
Hey Nick,
I know this a very track oriented forum, but I have a very non track oriented question about my RSV4, so non-track oriented, it's about passenger footpegs.
To be clearer, I am after this bit:
https://www.af1racing.com/store/Scri...dproduct=56849
but, by friday... Need to take a girlie for a ride on friday and at the moment, I cannot mount the akra exhaust to the pillion footpegs as it's mounted to the carbon hanger instead! I've got the pillion pegs, just not that part :(
Do you happen to have it from any of your builds lying around?
Thanks mate,
Nath
Perhaps hit up a local metal fab. Looks easy to make and if you could make a mock up in Cardboard and that pic and give it to em they'll probably knock it up for a case
On the weekend anyway
Getting dirtier (well the BOY is - but I bet I'll play as well) picked up this and $700 of Dirt clothing (ouch)
20150629_101940[1].jpg
And something for me (hopefully lives up to promise of 4-8 hp - the B4 and After Dyno will be the test - oh and Hidden Valley in 6weeks)
20150629_102007[1].jpg
A few new toys to play with, seeing as a new bike is on hold for a few more mths
Sent from my iPhone using Tapatalk
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
$105.99?
Any chance I could grab it before friday? Would love to see your trackbikes and get some ideas too!
Cheers,
Nath
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
Sent my membership forms to ST George.
Sent from my iPhone using Tapatalk
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
😆😆😆😆😆
Sent from my SM-N915G using Tapatalk
I bet the remote got a workout over the past month though
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
It does look a little like one of those Sidi boots, colour your toes same as the moonboot, couple of stickers, you'll be good to go!
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
Pimpin'!!!!!
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
stripped down my 2015 RSV4 , sold the fairings and fitted my carbon wheels
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
Today, added the crash protection, and started drilling out the exhaust valve, and sold my road fairings
Nice!! Hey, that upper dash mount is exactly the same as the earlier models. Which bit is supposed to be different?
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
I thought so , but is only the shape of the moulded OEM upper fairing. It's the same as the old models. so all good for the new fairing Marshy. And the stock exhaust is a copy of the Acro evo 2 system.
Interesting to find , the frame is adjustable for engine and headstock
Did a little shopping today for an updated tow vehicle....
Last edited by Little Mick; 05-07-2015 at 04:52 PM.
Life's too Short- YOLO!
Need a booster seat for it Noel .
It's a good alternative for towing the next trailer and when the daughter gets into her horses. 4×4 dual fuel 5.4l... 2.5in lift on 33 inch tyres.....
Life's too Short- YOLO!
Fitted c/f frame covers to the '09. It's now officially finished!
Sent from my iPhone using Tapatalk
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
Oh yeah, and the R&G tank sliders too. It's the little touches, the attention to detail...
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
Did the first colour on the my new Racers Edge nose cone
IMG_4808[1].jpg
Finally fitted a decat pipe to the r6 and pulled the PC5 off my roadbike ready to go onto the trackie.
There are currently 253 users browsing this thread. (0 members and 253 guests)
Bookmarks