What I did today...

[Tristan]

Went out to CBA Engineering AKA Anderson Stands. Had this installed

[senator8]

Guessing you have an aversion to typing.lol

I do at the moment. Especially on the phone

[Medic!]

Same here. My cursor has a mind of its own. Specially when quoting or editing before posting. Sometimes I just give up or not even attempt in the first place.

[Marshy]

I'm confused Tristan; what is the front stand doing there?

[dan]

Engineering place up Taree. Wetty also got his done down there

Excuse my ignorance but what is the purpose of the ring?

[Tristan]

What do you mean Nick ??

[Marshy]

Excuse my ignorance but what is the purpose of the ring?

Any sharp edge must have a minimum of 3mm beading on it, so as not to cut you. That's from memory of the GCRs.

What do you mean Nick ??

There's a red front Anderson stand at the front wheel that doesn't look like it's holding up the forks; nor does it look needed, because the wheel chock is holding the bike. Just wondered what it's for.

[Marshy]

what is the purpose of the ring?

It kills people:

[dan]

Any sharp edge must have a minimum of 3mm beading on it, so as not to cut you. That's from memory of the GCRs.

Ahh yes of course. Came across that one when trying to work out a shark fin pre-Round 5&6.

[dan]

It kills people:

Oi - you can either answer the question or post a google image - you can't do both!

Possibly leeway for narcotic abuse yet to be investigated.

[Tristan]

Yeah nick it's just sitting there doesn't do any thing storage lol

[Marshy]

Oi - you can either answer the question or post a google image - you can't do both!

Possibly leeway for narcotic abuse yet to be investigated.

My excuse is that they were two separate posts (possibly one each from two of my many personalities?) and thus in kind of a grey area, but in principle you make a good point and I retract the post that wasn't funny....

[Saturnalian]

Took delivery of my new paint for next years look and purchased my new spray booth for $60.00

Attachment 349

[Phat3R]

Took delivery of my new paint for next years look and purchased my new spray booth for $60.00

Great idea, once my crop heads, I'll respray my fairings too

[Medic!]

Ah so this is how to fund racing.

[Marshy]

Took delivery of my new paint for next years look and purchased my new spray booth for $60.00

Attachment 349

Man, that's a fricken awesome idea!!! Top stuff!!

[Marshy]

Great idea, once my crop heads, I'll respray my fairings too

[Little Mick]

Man, that's a fricken awesome idea!!! Top stuff!!

Wholeheartedly agree!!!!

[Baddie]

What I did today....Rode the blade after reinstalling Oem Dash very happy....tried to stop rear tyre from melting with track temp of 73c...went to bikebiz to Mark V new Zx10r....had a up close look at care flight helicopter ( bad crash T11)...
The best part get too do it all again.

[Little Mick]

What I did today....Rode the blade after reinstalling Oem Dash very happy....tried to stop rear tyre from melting with track temp of 73c...went to bikebiz to Mark V new Zx10r....had a up close look at care flight helicopter ( bad crash T11)...
The best part get too do it all again.

from a flaggy or rider point of view???

[Marty]

What I did today....Rode the blade after reinstalling Oem Dash very happy...

how come you put the OEM back in? Did you have a problem with the H&M?

[chubb]

He has translogic. Not HM

[Marty]

He has translogic. Not HM

Ahh my mistake, someone here put one on recently I'm sure of it. I've had a few issues with mine that's why I was hoping to compare notes with someone else.

[chubb]

whats wrong with yours?

[Baddie]

how come you put the OEM back in? Did you have a problem with the H&M?

Dash works fine..but after chatting with UK techies I need to install rear wheel sensor.
Couldn't be stuffed right now, therefore up for sale if interested.
$250.00 ono.

[senator8]

Went to see my sponsors Protech Motorcycles for some dyno fine tuning. Outstanding work and great guys to deal with. Dom the owner is ex PTR and real perfectionist. Notice things like rags on the tie down points. That's Damien and Alex Cudlin's bikes in the background, and their family own a bike shop, so says something.

Highly recommended, and I'm not easy to please

[senator8]

Dash works fine..but after chatting with UK techies I need to install rear wheel sensor.
Couldn't be stuffed right now, therefore up for sale if interested.
$250.00 ono.

Is it universal? Maybe my Suzuki?

[Saturnalian]

Well the acrylic rattle can booth has been doing a great job of not covering everything else in my lockup with spray dust.
I can't say the same for not covering myself.
One more fairing to rub the primer back on and into the paint job we go....

Attachment 362

[Phat3R]

Well the acrylic rattle can booth has been doing a great job of not covering everything else in my lockup with spray dust.
I can't say the same for not covering myself.
One more fairing to rub the primer back on and into the paint job we go....

Attachment 362

Chroming heaven ... you should sell tickets ...

[Saturnalian]

Those days of selling things for other peoples enjoyment.....
Long over.

[senator8]

Is that your lock up at West Gosford?

[Saturnalian]

Yes. Are you in it now ?
Or are you just playing clever spot the difference games

[senator8]

Just thought it was a good halfway place for my shit. Better than an hour off the freeway to your place

[Saturnalian]

Just thought it was a good halfway place for my shit. Better than an hour off the freeway to your place

Im closer now. Moved to Davistown. On 3 acres. I'll set up a tent in the backyard for you

[Saturnalian]

Just thought it was a good halfway place for my shit. Better than an hour off the freeway to your place

New place even has it's own guest bathroom. Let's talk about the other if you wish. I should have some
Room in there soon


Sent from my iPhone using Tapatalk

[Negrogrande]

The rebuild begins!


I have fitted my danmoto clipons (never buying again)
Renthals,
New brake reservoir
Bled brakes
Bent rearsets into shape until new ones arrive
And installed a QS
now I only need a fairing stay (ordered) mid pipe (ordered) and a set of slicks and I can go back on track

[Marshy]

You didn't consider giving the engine etc a bit of a wash down, so you can check for damage? It's filthy in that first photo!!

Otherwise it's looking great! Often what looks like a total wreck turns out to not be so bad....

Good work. Keep us updated

[Tristan]

Decided to deck the Van out.


Sent from my iPhone using Tapatalk

[Negrogrande]

You didn't consider giving the engine etc a bit of a wash down, so you can check for damage? It's filthy in that first photo!!

Otherwise it's looking great! Often what looks like a total wreck turns out to not be so bad....

Good work. Keep us updated

blow nozzle on the compressor
haven't washed the bike fully, but I pulled the airbox out and cleaned before I started it

[CBR42]

Installed one of Marshys Annitori Quick Shifters on the CBR today.Holy cow its like riding an automatic.Flat changes without backing off.Amazing little device.Had to take the side fairings(its a roady) and the airbox off to get to the plug top coils which is always a good patience tester when putting it back together as those bitchy little clips and saddles never go back in the way they came out.Thought i might have been able to get away with getting at it by just removing the airbox but nope.Hooking the QS itself up was the easy part.No wires to cut, plug and play
Big thanks to Nick for supplying on short notice on Friday and for the advice today Cheers mate

[Phat3R]

Installed one of Marshys Annitori Quick Shifters on the CBR today.Holy cow its like riding an automatic.Flat changes without backing off.Amazing little device.Had to take the side fairings(its a roady) and the airbox off to get to the plug top coils which is always a good patience tester when putting it back together as those bitchy little clips and saddles never go back in the way they came out.Thought i might have been able to get away with getting at it by just removing the airbox but nope.Hooking the QS itself up was the easy part.No wires to cut, plug and play
Big thanks to Nick for supplying on short notice on Friday and for the advice today Cheers mate

I'm looking forward to playing with one of these combined with a race shift pattern.

[Marshy]

Installed one of Marshys Annitori Quick Shifters on the CBR today.Holy cow its like riding an automatic.Flat changes without backing off.Amazing little device.Had to take the side fairings(its a roady) and the airbox off to get to the plug top coils which is always a good patience tester when putting it back together as those bitchy little clips and saddles never go back in the way they came out.Thought i might have been able to get away with getting at it by just removing the airbox but nope.Hooking the QS itself up was the easy part.No wires to cut, plug and play
Big thanks to Nick for supplying on short notice on Friday and for the advice today Cheers mate

Thanks Tony; glad you're happy with it!

Look forward to catching up again soon

[dan]

I'm looking forward to playing with one of these combined with a race shift pattern.

Let me know how you go with hooking such modern technology to our old steam engines!

[tempest]

finally installed QS on my bikes.
Very easy install. Can't wait to try at Rnd 1.
Thanks Marshy.

[chubb]

You will love it.

I always thought I didn't need a quick shifter but now that I have one I can't live without one!

[Marshy]

Thanks Marshy.

Anytime, mate

[Marshy]

Installed Phat3r's quickshifter, and serviced his shock and forks. The rear shock was ugly inside!

rickQS.jpg

P1070295.jpg

[Baddie]

Picked up new trailer....time to customize.

[dan]

Installed Phat3r's quickshifter, and serviced his shock and forks. The rear shock was ugly inside!

rickQS.jpg

P1070295.jpg

Wow, I bet mine is the same :(

[Tristan]

now completely set up with my new Bonamici rear sets.


Sent from my iPhone using Tapatalk