What I did today...

[chubb]

I need to know how to do keyless for the yammie without locking myself out! Anyone?

[Marshy]

Got it, thanks Rick. I figured it was that bracket, but just wanted to check. I honestly haven't looked at the yammie one for a while, so I'll take a squiz....

[senator8]

Got it, thanks Rick. I figured it was that bracket, but just wanted to check. I honestly haven't looked at the yammie one for a while, so I'll take a squiz....

No worries. I'm second guessing myself, and hoping I haven't gone too light
The beemer is a major job to pull the airbox, upper injectors etc. The upside is I got to give everything a good check and clean and found a few things to sort now better than later.

[chubb]

Stripped the bike ready to go to RAM



First base coat of the wheels. Stupid wind prevented me from doing the rear properly. Going to have to rub it back and sort it out.

[Marshy]

Looks great!!! I'm gonna have a go at my wheels sometime soon.....

[chubb]

White primer is the base for the bright coloured wheels that will be coming along.

[Tristan]

Just setting up the MV stand at the Expo


Sent from my iPhone using Tapatalk

[Negrogrande]

this




should have paid for the extra get Marshy to fit it service, I suck at it

[Phat3R]

this
should have paid for the extra get Marshy to fit it service, I suck at it

Looks awesome ... and shiny! So tell more ... how/who painted? No way you'll get a single digit for StG racing ... a two digit and use that smaller font Marshy did for mine would fit.

[dan]

Looks awesome ... and shiny! So tell more ... how/who painted? No way you'll get a single digit for StG racing ... a two digit and use that smaller font Marshy did for mine would fit.

I'm changing to double dig pain in the arse getting three across the front.

[Negrogrande]

Looks awesome ... and shiny! So tell more ... how/who painted? No way you'll get a single digit for StG racing ... a two digit and use that smaller font Marshy did for mine would fit.

They are superbikesource fairings based on a design I drew up with Marshy (combination of my very average MS paint & his photoshop)

[Marshy]

this




should have paid for the extra get Marshy to fit it service, I suck at it

Looks fantastic mate!!!

[dan]

That looks awesome dude!

[dan]

I didn't think you could get the '9' plate though. Can you race with that?

[chubb]

Did you get new fairings?

[Negrogrande]

Can't register 9 but I'm just going to try and enter it in races next year if I still have the zook

[Mr.Ed]

Can't register 9 but I'm just going to try and enter it in races next year if I still have the zook

Do tell... what are you getting next, Andrew? There's always room for another ZX6R... hahahaha

[Negrogrande]

Do tell... what are you getting next, Andrew? There's always room for another ZX6R... hahahaha

It's a secret, but I'm looking at an 08 :P

[Mr.Ed]

It's a secret, but I'm looking at an 08 :P

Sweet! Plenty of 08 plated 2009 model ZX6Rs out there

[Mazabuzz]

Why didnt you go with another number?

[Negrogrande]

Why didnt you go with another number?

number board is too small and I'm ditching the Jordan theme

[chubb]

Pretty sure stu23 ran the number 9

[Stu23]

I don't own it happy to change

[Tristan]

Looks awesome


Sent from my iPhone using Tapatalk

[Tristan]

Finally after 19 days in customs I got my Bonamici rear sets. So easy to put on took me longer to get the old ones off. I'm very happy with them. I Did however forget to order the brake switch :(




Sent from my iPhone using Tapatalk

[chubb]

Sneak peek of the next years colours on the tail

[senator8]

My one off BMW battery tray was waiting at home for me.
Found it in the UK. The company made a prototype (this one) and never took it to production.

[dan]

My one off BMW battery tray was waiting at home for me.
Found it in the UK. The company made a prototype (this one) and never took it to production.

That's pretty legit!

[Marshy]

Work of art!!!

[senator8]

Bought some carbon fibre panel. Made ignition and fan switch block for the BMW. Suzuki next. Want to find some waterproof switches though.




Also had 3mm ring made and pressed onto the end of my exhaust can to comply for scrutineering. They've pulled me up on it twice now., and safety first in any case.

[Negrogrande]

Also had 3mm ring made and pressed onto the end of my exhaust can to comply for scrutineering. They've pulled me up on it twice now., and safety first in any case.

where did you get that done?

I'm running a danmoto as well

[senator8]

where did you get that done?

I'm running a danmoto as well

Engineering place up Taree. Wetty also got his done down there

[dan]

Engineering place up Taree. Wetty also got his done down there

Excuse my ignorance but what is the purpose of the ring?

[Marshy]

what is the purpose of the ring?

It kills people:

[Saturnalian]

Funny... I made a carbon fibre triple clamp cover and fitted it.......

Repaired the air box cover on the R6 and refitted it.

Swapped the bike over to race shift. (That should make for an interesting first couple of days!!!!)

Did the Annitori ignition coil bypass. Thanks Marshy and BoB.

Removed the awesome Panda fairings and stripped all of the stickers off for a sanding, ready to drop back in to the moulds at Racers edge this week.

And went shopping for some tasty Carbonin parts for the new year...

Attachment 344Attachment 345

[chubb]

Ooooh nice CF!

I'm still trying to sort out the electrical gremlins.

Very close to throwing the towel in and dropping the bike off to an auto electrician

[Saturnalian]

Ooooh nice CF!

I'm still trying to sort out the electrical gremlins.

Very close to throwing the towel in and dropping the bike off to an auto electrician

Honestly Rancell. Auto electrics can be a major PITA. with DC everything always seems to be related to something else so troubleshooting can be a complete headf**k.

I'm so stoked that you got the HM dash though. I kinda have to buy one now. It was on my Christmas list but seems to have slipped near the bottom.

Have you set it all up yet ? Comments ??

J.

[chubb]

Honestly Rancell. Auto electrics can be a major PITA. with DC everything always seems to be related to something else so troubleshooting can be a complete headf**k.

I'm so stoked that you got the HM dash though. I kinda have to buy one now. It was on my Christmas list but seems to have slipped near the bottom.

Have you set it all up yet ? Comments ??

J.

Yeah it is a headache!!!

The HM dash works a treat.

Butttt the stock dash has all the diag functions to try sort out these gremlins!!

Hopefully I won't have any trouble this coming Thursday.

[Saturnalian]

Yeah it is a headache!!!

The HM dash works a treat.

Butttt the stock dash has all the diag functions to try sort out these gremlins!!

Hopefully I won't have any trouble this coming Thursday.

Do you need to borrow a dash to help you sort it out ?
As long as you don't mind looking at one that has just clicked over 21000 Km's.....
WTF- When did i do all of those ?

J.

[senator8]

Nice Jamie. I've got a 2013 seat unit and some updated graphics for the new year
A few days at Protech on the dyno this week

[Saturnalian]

Nice Jamie. I've got a 2013 seat unit and some updated graphics for the new year
A few days at Protech on the dyno this week

Oh, i almost forgot.
Speaking of seats.... Ordered one of these babies. Guess i'll need a different tail section now

Attachment 346Attachment 347

Can you see whats happening here Rick ?
It seems to be running more and more away from being a practical road/track/ race bike with each new purchase....

[senator8]

Perfect! So long as you enjoy it. Don't listen to the haters

[chubb]

Well I went through all the wiring with a wiring diagram and a fine tooth comb over the weekend.

Everything is meant to be where it all says. Bike starts fine idles well. Went through the gears on the stand couldn't replicate the issue I had last Thursday.

See what happens on Thursday at SMP whether the bike dies out while riding or not.

FI light comes on when the bike dies and if the bike doesn't die, comes on just as I turn the key off.

I get error codes 64, 72, 0

Which in the service manual means nothing as it doesn't exist!!!

Bah
????

[Negrogrande]

ah, not very convenient for me, Will have to ring around some exhaust places before round 1

[Mr.Ed]

Might as well just post the can... Can't be more than $10 each way

[Negrogrande]

Ed you are more than just a pretty face, the can weighs F all.
Rick can you send me the shop details?

[senator8]

Ed you are more than just a pretty face, the can weighs F all.
Rick can you send me the shop details?

Can you read this?
Just a note: I may put a small rivet or bolt though the bottom of the ring to make sure it never comes off.

[Medic!]

Can you read this?
Just a note: I may put a small rivet or bolt though the bottom of the ring to make sure it never comes off.

Guessing you have an aversion to typing.lol

[senator8]

Guessing you have an aversion to typing.lol

I do at the moment. Especially on the phone

[senator8]