PDA

View Full Version : Replace OEM LHS TC/ABS switch BMW S1000RR



senator8
03-01-2015, 07:50 PM
I'm on my second OEM switch block on a 2010 and it's gone again. Can't justify the expense of the aftermarket alpha/stm switchs etc.

So I thought that given the constant OEM failures and high cost of prewired aftermarket solutions that it might be of interest to any race/track bike owners not requiring the other switches (blinker, headlights, horn etc) or even if you want to remove the switch for safe keeping in case of a crash at the track. Or if like happened to me at a race meeting, you're at the track and your switch fails and you want to be able to switch TC/ABS on/off and nobody has a spare.

I've stationary tested it and works fine. No warning lights or faults. I won't get a chance to double check everything and ride the bike for another month or so.

The below photos show the plug and the pins within the plug that operate the TC/ABS button.


http://i1064.photobucket.com/albums/u365/senator8/photo1_zpsee83378c.jpg (http://s1064.photobucket.com/user/senator8/media/photo1_zpsee83378c.jpg.html)

http://i1064.photobucket.com/albums/u365/senator8/photo2_zpsbdef91ec.jpg (http://s1064.photobucket.com/user/senator8/media/photo2_zpsbdef91ec.jpg.html)


The wires if you wish to splice into them are brown/blue & brown/black.

http://i1064.photobucket.com/albums/u365/senator8/photo3_zps855fdc24.jpg (http://s1064.photobucket.com/user/senator8/media/photo3_zps855fdc24.jpg.html)

The end result is this complicated piece is removed and goes:

http://i1064.photobucket.com/albums/u365/senator8/oemlhsswitchblock_zpsf77ac582.jpg (http://s1064.photobucket.com/user/senator8/media/oemlhsswitchblock_zpsf77ac582.jpg.html)


To this - single round black momentary switch allows switching of the Traction Control and ABS if you have it connected.

http://i1064.photobucket.com/albums/u365/senator8/tcswitch_zps690b9329.jpg (http://s1064.photobucket.com/user/senator8/media/tcswitch_zps690b9329.jpg.html)

Negrogrande
03-01-2015, 07:53 PM
Awesome work

stevem
04-01-2015, 06:03 PM
Hi Rick, So the two wires you joined together do traction and ABS ? Do you have your abs on the bike or is it removed ? My ABS pump has been removed, just wondering if that would trigger a fault code or something silly. Nice work man, get rid of all that crap on the left bar. Cheers

Turbo
04-01-2015, 06:14 PM
Very tidy! Nice work, Rick.

senator8
04-01-2015, 07:22 PM
Hi Rick, So the two wires you joined together do traction and ABS ? Do you have your abs on the bike or is it removed ? My ABS pump has been removed, just wondering if that would trigger a fault code or something silly. Nice work man, get rid of all that crap on the left bar. Cheers

Hey Steve,
I just used the wire in the photo to show which pins. It's normally open circuit and you just need a momentary switch to close it (same as OEM)
My ABS is also removed. There are no codes coming up and as far as I can tell from the original switch block it is just a switch, albeit a complicated one.
I can't be 100% sure until I can ride it and the bike goes through the TC self test. I'd ride it up the road if I didn't live opposite a highway patrolman.
It's a good way to go to get rid of those vulnerable plastics even just to take the oem switch off for safe keeping

senator8
04-01-2015, 07:23 PM
Awesome work


Very tidy! Nice work, Rick.

Cheers :)

BoB
04-01-2015, 07:57 PM
Rick , the bit you removed with the blue buttons looks like something that controls the tardis ..

Marshy
04-01-2015, 10:12 PM
Rick , the bit you removed with the blue buttons looks like something that controls the tardis ..

:rofl: Agreed!!!