PDA

View Full Version : R6 build - brand new to racebike



Marshy
03-11-2014, 09:44 AM
I've got a build job going.... Brand new, never ridden R6 to fully sorted racebike. Some bits were supplied with the bike, and some I'm sourcing.

As delivered. Everything is soooooo clean!! It took twice as long as normal to strip it down, as I was worried about scratching it!!:

http://tarmactalk.com/images/build-1.jpg

http://tarmactalk.com/images/build-2.jpg






Supplied bits:

http://tarmactalk.com/images/build-3.jpg







The build is a bit out of order, as we are still waiting on parts to arrive. In the meantime, on goes the rearsets, engine covers, full Akra system, Ohlins TTX, and the new Annitori QS PRO quickshifter. The road tyres are staying on until it's been run in and dynoed:

http://tarmactalk.com/images/build-4.jpg

http://tarmactalk.com/images/build-5.jpg

http://tarmactalk.com/images/build-6.jpg

http://tarmactalk.com/images/build-7.jpg

http://tarmactalk.com/images/build-8.jpg

http://tarmactalk.com/images/build-9.jpg

http://tarmactalk.com/images/build-10.jpg

chubb
03-11-2014, 10:15 AM
that looks very very clean and new!!!

Turbo
03-11-2014, 10:36 AM
Puuuurty!! What's going on it??

Leezx10r
03-11-2014, 11:11 AM
Nice :) keep the pics coming

Saturnalian
03-11-2014, 05:05 PM
Like like like

Carl-52
03-11-2014, 05:42 PM
SOO CLEAN!!!! its like a dream bike :D WE DEMAND A BUILD/PARTS LIST!!!!!!!!

Marshy
03-11-2014, 08:15 PM
Puuuurty!! What's going on it??

The customer has asked for pretty much all the goodies, except engine work. Flashing and dyno mapping the ECU, then the usual stuff - race air filter, quickshifter, clipons, levers, steering damper, braided lines, Vesrah pads, 520 chain & sprockets, shark fin, lithium battery, stomp grip, painted fairings, smog blockoff, exup eliminator, tank sliders, lockwiring, forks revalved and resprung etc.

Fun fun fun!!

chubb
03-11-2014, 08:27 PM
what damper?? where you getting them?

Marshy
04-11-2014, 08:13 AM
Loving the HyperPro currently. Top design and quality, at a very reasonable price (particularly compared to Ohlins): https://www.motomummy.com/hyperpro/hyperpro-06-2012-r6-rsc-active-damper/

Marshy
05-11-2014, 09:45 AM
More goodies (and I won't need the sanding pad for the discs.... they are brand new!!).

http://tarmactalk.com/images/build-11.jpg





Fitted the new Annitori QS PRO quickshifter, and a Motocell lithium battery (you'd swear the packet was empty, they are so light!).

http://tarmactalk.com/images/build-12.jpg

http://tarmactalk.com/images/build-13.jpg

http://tarmactalk.com/images/build-14.jpg

Turbo
06-11-2014, 12:55 PM
Loving the HyperPro currently. Top design and quality, at a very reasonable price (particularly compared to Ohlins): https://www.motomummy.com/hyperpro/hyperpro-06-2012-r6-rsc-active-damper/

+1 for the HyperPro. I love mine!
Plus it has both the words "Hyper" and "Pro" in it, so you know it's good ;)

Marshy
06-11-2014, 08:38 PM
Nearly the last of the bits arrived today. Now to fit them all....

http://tarmactalk.com/images/build-15.jpg

Marshy
17-11-2014, 06:42 AM
Slowly slowly.

Smog block off plates on. Air filter in. Sidestand cutout taken care of. EXUP eliminator installed. Sexy cf tank sliders (although they are going to be hidden under the tank cover).

http://tarmactalk.com/images/build-16.jpg

http://tarmactalk.com/images/build-17.jpg

http://tarmactalk.com/images/build-18.jpg

http://tarmactalk.com/images/build-19.jpg

Marshy
24-12-2014, 11:21 AM
Finally, more progress! Chain and sprockets fitted. Shark fin mounted. Slicks fitted (this was going to wait, but things are a bit out of order due to the dyno not being available until 5th of Jan). Front end out for the fork revalve and respring.

http://tarmactalk.com/images/build-20.jpg

http://tarmactalk.com/images/build-21.jpg

http://tarmactalk.com/images/build-22.jpg

chubb
24-12-2014, 12:10 PM
ahh making me miss the R6 already...





then I think about how much fun I'm going to have with an extra 400ccs

Marshy
01-01-2015, 09:16 PM
Finally revalved the forks! I hope I can remember how all this goes back together...... ;)

And did some lockwiring. Oh, and did Wetty's trick of pouring litres of distilled water through the bike whilst it was running, to flush the coolant out. I can't guarantee there's no minuscule trace, but it's pretty good.

http://tarmactalk.com/images/build-27.jpg

http://tarmactalk.com/images/build-23.jpg

http://tarmactalk.com/images/build-24.jpg

http://tarmactalk.com/images/build-25.jpg

http://tarmactalk.com/images/build-26.jpg

Marshy
06-02-2015, 12:49 PM
Finally got the bike back from the dyno yesterday, after a looooong delay. Got some custom spacers for the forks made up in the meantime, so that I could fit proper springs to the forks (the OEM R6 springs narrow at the top, meaning normal linear springs don't fit without an adapter). They look factory! Nice job, Rob H.

Bit disappointed to have to disassemble the front end and forks yet again, but finished it last night.

http://tarmactalk.com/images/build-28.jpg

http://tarmactalk.com/images/build-29.jpg

Marshy
06-02-2015, 12:51 PM
Now of course the ECU flash is broken and the bike won't start! But when it was going, the auto-blip, clutchless downshift function sounds unreal.


http://youtu.be/ad7adTe8r_A

Ruckos87
06-02-2015, 01:22 PM
Now of course the ECU flash is broken and the bike won't start! But when it was going, the auto-blip, clutchless downshift function sounds unreal.


http://youtu.be/ad7adTe8r_A

Very nice [emoji106][emoji106] so jealous

Stu23
06-02-2015, 01:25 PM
what happened to the ecu image ?

Marshy
06-02-2015, 01:30 PM
what happened to the ecu image ?

Custom code has an error in the tip-over switch circuit. Hopefully a relatively straight-forward fix, but it just adds delays. It's not a flashtune image.

Stu23
06-02-2015, 01:32 PM
ahhh ok :)

Marshy
06-02-2015, 03:12 PM
I'm a bit disappointed at how poorly I've updated this build thread! I'm just giving myself an uppercut....

Braded lines and Vesrah pads went in. Vortex levers on, Superbike Source clip-ons fitted, Renthal race grips too.

http://tarmactalk.com/images/build-30.jpg

http://tarmactalk.com/images/build-31.jpg

chubb
06-02-2015, 03:29 PM
Poor bloke has to wait so long to ride his bike

Mr.Ed
06-02-2015, 04:21 PM
dat blip tho

Turbo
06-02-2015, 04:34 PM
dat blip tho
^^^^ This!

Marshy
06-02-2015, 08:13 PM
Poor bloke has to wait so long to ride his bike

There is that. Although good things come to those that wait.


Sent from my iPhone using Tapatalk

Marshy
08-02-2015, 08:02 PM
Done!

http://tarmactalk.com/images/build-40.gif

http://tarmactalk.com/images/build-35.jpg

http://tarmactalk.com/images/build-33.jpg

http://tarmactalk.com/images/build-34.jpg

http://tarmactalk.com/images/build-37.jpg

http://tarmactalk.com/images/build-38.jpg

http://tarmactalk.com/images/build-39.jpg

stevem
09-02-2015, 04:56 AM
Well done mate , nice work.

Leezx10r
09-02-2015, 06:02 AM
Looks sweet marshy


Sent from my iPhone using Tapatalk

Simmo
30-06-2015, 09:10 AM
Came up a treat Marshy.

Any tips on fitting similar steering damper to a 2010 R6?
In other words..."What sort of trouble can I get myself into as a novice tinkerer trying to do it myself?"

Marshy
30-06-2015, 11:31 AM
Came up a treat Marshy.

Any tips on fitting similar steering damper to a 2010 R6?
In other words..."What sort of trouble can I get myself into as a novice tinkerer trying to do it myself?"

Good question! You'll be fine; it's not all that difficult, but it requires a bit of attention to detail. There are a couple of things to take into account:

1. You'll need a 36mm socket, for the headstem nut.
2. The main bracket (between the front of the tank, the underside of the damper, and the headstem) needs to be the right way up. Depending on brand of damper, they can be either the same either way up, or they can be different lengths for 'up' and 'down' , so check the instructions.
3. Check, check and check again the alignment of the new headstem nut/bracket. The bracket mounts on the headstem shaft, and you will most likely need washers under the bracket where the tank bolt goes through to get the height right on the bracket, so that the new headstem nut/bracket is 100% parallel with the top triple. It sounds complicated, but it's actually pretty obvious when you fit it all up. When you do up the tank bolt, it can pull down on the bracket between the tank and the headstem, and the bracket then rubs on the top triple, and can even bind up completely when you turn the bars. This is bad, m'kay?

I've just found a similar pic and added some scribbled notes.

In short, go for it, but check carefully for binding.

1313

Simmo
30-06-2015, 04:46 PM
Thanks for the advice.
I can see it already. I'll give it a go and then bring the bike to you to sort it out properly!

Turbo
30-06-2015, 08:33 PM
The bracket mounts on the headstem shaft, and you will most likely need washers under the bracket where the tank bolt goes through to get the height right on the bracket, so that the new headstem nut/bracket is 100% parallel with the top triple.

100% yes!
Here's one of mine on 3 x really thick washers, plus the tank cover and it's T-washer!
http://i.imgur.com/WiN76gdh.png

Before putting the piston in, crank the head stem nut up a bit, then the tank bolt with bracket a bit.. and so on so that you're not cross threading the nut or bending the bracket and pinching the top triple.
As Marshy says, it'll be obvious once you've got it offered up into place!

Mr.Ed
01-07-2015, 01:41 PM
Yep, I remember the 1st time I fitted the damper to the R6 and took it out only to come back to pits straight away thinking I had a flat tire... lol lesson learned

WRCPUG
08-07-2015, 09:55 PM
looks great Nick it came up a treat. It would be soooooo nice to take a brand new bike and go mental on it like that. Maybe one day ill get there :P