ARDC Private Practice, May 30

[Spilly209]

Hi guys,

They've only got 3 entries so far, need 10. So please sent you forms in!




Sent from my iPhone using Tapatalk

[Mstevo]

tempted! but it's the stoopid long track :-(

[Spilly209]

Yea I know, that sucks, the new section up the hills is where cars tend to leave rubber & crap. Still better than a MEGA track day & half the price


Sent from my iPhone using Tapatalk

[Marshy]

I don't like that it's the full circuit either, but I'm in anyway!! Track time is track time. And it's cheap!

[zoidberg]

I'm keen as for this, I've just joined ARDC, what else do I have to do to be able to ride this?

[Marshy]

You need a Senior National MA race licence, or a AASA race licence. If you have one of those, just fill in the form (stickied here: http://tarmactalk.com/forum/showthread.php?232-ARDC-private-practice-bike-rego-form ) and/or just turn up on the day - but check there are 10 bikes booked so there's an allocated bike session first.

[zoidberg]

I have neither but am definitely planning on doing some club rounds later this year, so will be getting an MA license. If I apply this week would I have one in time? Sorry for all the questions!

[Marshy]

Yep, it's normally two weeks to get an MA licence, so you'll be fine if you get it in immediately. Just make sure you get a Senior National (don't be tempted by the slightly cheaper Club licences etc), as you can't do ARDC days on a lesser licence. You also get $20 back from each SMSPRD ride day you do, as a holder of an MA licence.

[chubb]

have fun boys!! I'll miss Jamie's clubby weapon debut!

[Marshy]

Just sent my form in :peace:

[Phat3R]

I iz printing de form out ...

[shippy__]

I don't think I would have a job if I crashed 2 days before I am supose to go back to work


Then again !

I might be a last minute

[shippy__]

I shouldn't have posted, now I am excited

[zoidberg]

Filling out MA license form as we speak, printing out the other. If license comes through in time, I'm in. Plus a mate of mine, so potentially add two!

[Phat3R]

I ask this every time ... it's like ground hog day ... what is the email address to send the form to? I can't see it on the form or website.

Glad you have the forms on TT Marshy ... the silly link on the ARDC site points to a disabled Dropbox link (http://www.sydneymotorsportpark.com.au/experience/detail/ARDC-PRIVATE-PRACTICE/15).

[James_]

I ask this every time ... it's like ground hog day ... what is the email address to send the form to? I can't see it on the form or website.

Glad you have the forms on TT Marshy ... the silly link on the ARDC site points to a disabled Dropbox link (http://www.sydneymotorsportpark.com.au/experience/detail/ARDC-PRIVATE-PRACTICE/15).

Ive have always successfuly sent it to reception@ardc.com.au ...... however, when I sent it last time they had no record of it at sign on! This is a major flaw in the booking system.:eek:
I figured the amazingly tech savvy 70's yr olds in the ardc office forgot to swap their phone line back to the modem that particular afternoon.

[Phat3R]

Thx James ... I will send it through.

Sent ... I also asked them to consider whacking the return email address on the form as an alternative to fax, and let them know their link is broken.

[Phat3R]

I shouldn't have posted, now I am excited

743

[stevem]

Filling out MA license form as we speak, printing out the other. If license comes through in time, I'm in. Plus a mate of mine, so potentially add two!
If you are really keen miraculously they can do it in 3 days for $50 extra

[Spilly209]

I rang today, the reception@ardc.com.au email is correct 👍👍👍


Sent from my iPhone using Tapatalk

[shippy__]

lol

[Mstevo]

I don't think I would have a job if I crashed 2 days before I am supose to go back to work

You planning on crashing?? I'd change my plans then lol

[shippy__]

I figured the amazingly tech savvy 70's yr olds in the ardc office forgot to swap their phone line back to the modem that particular afternoon.

http://1.bp.blogspot.com/_GzQNaaZsh_8/SoLbU9HtIXI/AAAAAAAANsQ/liQlmhquEwg/s400/2.jpg

[Marshy]

Christine (who receives the reception@ardc.com.au emails) is always kind enough to send a quick "thanks Nick" email as soon as she gets my email. If I don't get that response (hasn't happened yet), I'd be concerned.

[Phat3R]

Can confirm that I got a confirmed email reply from Christine about 10 minutes after sending. Nick your email might be stuck in the interwebby thing somewherez! ;)

[Mr.Ed]

Nick your email might be stuck in the interwebby thing somewherez! ;)

Hmmm you might wanna re read what he wrote! ahahaha

[JC]

I should be in for this one. Have a couple of rears from WP I need to use ;-)

[chubb]

I'm sure Mstevo takes donations

[fitzy]

Might try make this one been a while so i will be staying out of the way if i am there and can get bike ready in time ;)

[JC]

Come on Mark. I'll need a toll.

[Spilly209]

I haven't had a response. Should I follow up you think?


Sent from my iPhone using Tapatalk

[Phat3R]

Yeah give her a call Steve.

Maybe get a head count update too?

Saw on RATS a few were umming and ahhing about going ...

[Spilly209]

Oh just some feedback on tyre pressures. With the Dunlop Ntecs I usually run 24psi in the rear and 34 in the front (hot).

SW racing installed their Mupo suspension in the morning of the 8th. I put a fresh UK Ntec on the rear on the 9th. In the 3rd session I started pushing hard and had 3 near high-sides on the last lap.

So came in & spoke to Stu from SW & he said cos it was warning up and it happened towards the end of the session it pointed to tyre pressure being too high. So dropped the rear down to 20psi abd the front to 31psi and didn't have an issue in the following sessions.


Sent from my iPhone using Tapatalk

[dan]

I normally run around 22 on the rear. 24 seems way high. Glad you found a solution!

[Spilly209]

I normally run around 22 on the rear. 24 seems way high. Glad you found a solution!

Sorry meant to write 23 for the rear.

You coming Dan? They only had 6 entries a couple of hours ago (inc me)


Sent from my iPhone using Tapatalk

[Mazabuzz]

I'll be in for this

[dan]

Nah I'm going to be in LA making my way to the World Cup!

[Spilly209]

I'll be in for this

Please send your form in. If they don't get 10 bike entries it gets scrapped 😢


Sent from my iPhone using Tapatalk

[Spilly209]

Nah I'm going to be in LA making my way to the World Cup!

Ok that's a decent excuse lol


Sent from my iPhone using Tapatalk

[Negrogrande]

Tempted, I will see if I can get work off (doubtful)

[Spilly209]

Tempted, I will see if I can get work off (doubtful)

Come on bud....we need you!! Lol


Sent from my iPhone using Tapatalk

[Mr.Ed]

I was considering doing this day as I should be doing the toprider on the 31st and it would be great to do them back to back... but now it seems I might have to wave them goodbye. :(

746

[Little Mick]

what did you do?

[Mr.Ed]

Got tripped playing basketball... not sure if it's broken 'cause there's almost no pain. Except for this one spot that... well, makes me swear in languages I don't even speak.

Dr. Google seems to think I broke my scaphoid... who knew I had one of those, hey?!

[Little Mick]

scaphoid in thumb?

[Mr.Ed]

Nah, the thumb is fine... it doesn't even hurt at all. It's more the base of the hand, where it joins the wrist. It happened yesterday and today it's not even bruised anymore but the area that was hurting yesterday, it's still hurting today. So off to the Docs tomorrow I guess.

I can probably still ride with little to no pain but if I crash (not that I'm prone to or anything) it may get ugly.

[Little Mick]

getting you to help me move may be out of the question then?

[Mr.Ed]

Oh I'd love to... but I'm busy that day!

[Spilly209]

Woooah!! You know you're supposed to swap hands once in a while right?

Bad luck mate :(


Sent from my iPhone using Tapatalk

[Marshy]

Woooah!! You know you're supposed to swap hands once in a while right?

Bad luck mate :(


Sent from my iPhone using Tapatalk

http://cdn.someecards.com/someecards/filestorage/sorry-disguise-sympathy-ecard-someecards.jpg

[Marshy]

http://static.someecards.com/someecards/usercards/893961dae9a5704e7165ef5009f9d8d0f1.png

[Mr.Ed]

Lucky for me I'm ambidextrous... and just for me, thank you. hahahaa

[Mr.Ed]

http://cdn.someecards.com/someecards/filestorage/sorry-disguise-sympathy-ecard-someecards.jpg

I LOL'ed, gf asked to see why... she LOL'ed. I didn't.

[Spilly209]

Ambidextrous + a girlfriend = oversexed!!


Sent from my iPhone using Tapatalk

[Marshy]

It's pretty funny though, right? :)

[Spilly209]

Laughter is the best medicine! :D


Sent from my iPhone using Tapatalk

[Mr.Ed]

It's pretty funny though, right? :)
Unfortunately, yes hahaha

[shippy__]

I have done my right scaphoid roller bladeing as a kid..... its pretty painful, they gave me a half cast and said rest !

Its a common injury from throwing your hands out flat to catch your fall

[Mr.Ed]

Yeah, that's the thing... I had the fall at around 9:30am, played on and off all the way to 1:30pm almost pain-free. At that stage I actually thought I'd hurt my thumb! Then when I was driving home I noticed something wasn't right on my hand but still no pain...

Now it hurts if I press on this one spot which incidentally means it hurts to drive or use that hand to help me get up. I have full range of hand and finger movement too so I'm hoping it's just a hairline fracture or something that small 'cause Google tends to give you lots of bad news if you know where to look! Haha

[Phat3R]

Fark Ed ... you are not having a good run ... hope it's minor mate ...

[Little Mick]

fingers crossed Ed....

747

[shippy__]

Just my experience..... I had no movement problems just constant meduim pain... but when the docter poked where im pointing it was unbearable



http://i188.photobucket.com/albums/z57/tweaker__/20140513_212101_zpszvbefpr3.jpg

[Saturnalian]

This is it. This is the day. Hoping to hell everything goes well in the re assembly, run in, dyno and testing stages in the next 2 weeks and then this is the day i'm hoping to get on track again for the first time since St George.
Can you make it out BoB ?

[Marshy]

It will be good to see you there, Jamie! I'm looking forward to checking out the new weapon :peace:

[Mr.Ed]

Just my experience..... I had no movement problems just constant meduim pain... but when the docter poked where im pointing it was unbearable



http://i188.photobucket.com/albums/z57/tweaker__/20140513_212101_zpszvbefpr3.jpg

Tried that, no pain there...

[zoidberg]

Fingers crossed it's not your scaphoid. If it is, don't try and shortcut the healing. I did mine years ago and ended up doing too much, too soon. 16 years later and it still twinges with pain every now and then.

In the spirit of the thread, I've just got to get my MA license done and I'm definitely in for this practise day.

[BoB]

Can you make it out BoB ?

sorry wont be out there riding , but may come out for a couple of hours to check out your new ride

[Leezx10r]

Morning All

With the ARDC days, when do you need to produce your license? On the day, or when you send the forms in? (Just that my license should be in the post from MNSW)

Also, what time do you have to arrive, normal track day time 0700-0730?

And finally any cut off time for getting your forms in to participate in the day?

Cheers

Lee

[Marshy]

On the day is fine for your licence. You can put TBA on the form.

Normal track day time is fine. The later you are, the less chance of good parking - the racecars take up a LOT of space each with their transporters etc. But there'll be a few bike garages set up already (we usually head for 49-50) which you can jump in.

Forms are due on the Wednesday, two days before the event. But if ARDC have already received 10 forms, then a bike session will definitely be allocated and you can just turn up on the day, no form required.

[zoidberg]

On the day is fine for your licence. You can put TBA on the form.

Normal track day time is fine. The later you are, the less chance of good parking - the racecars take up a LOT of space each with their transporters etc. But there'll be a few bike garages set up already (we usually head for 49-50) which you can jump in.

Forms are due on the Wednesday, two days before the event. But if ARDC have already received 10 forms, then a bike session will definitely be allocated and you can just turn up on the day, no form required.

That's going to be me, I've hopefully organised the day off work, just waiting on licenses etc to come through. Hopefully see you guys out there!

[Leezx10r]

thats great info, thanks Marshy.

All being well and licence comes through in time see you all then in pit 49 or 50 :)


On the day is fine for your licence. You can put TBA on the form.

Normal track day time is fine. The later you are, the less chance of good parking - the racecars take up a LOT of space each with their transporters etc. But there'll be a few bike garages set up already (we usually head for 49-50) which you can jump in.

Forms are due on the Wednesday, two days before the event. But if ARDC have already received 10 forms, then a bike session will definitely be allocated and you can just turn up on the day, no form required.

[Saturnalian]

However much it pains me to say it, I'm out for this one. Engine is coming out and back to the doctor apparently. Don't really want to talk about it. Shattered


Sent from my iPhone using Tapatalk

[Marshy]

What???????? Nooooooooo!!

[chubb]

Get another one!!

[shippy__]

Get a Express post engine from graves

Its what all the cool kids do



However much it pains me to say it, I'm out for this one. Engine is coming out and back to the doctor apparently. Don't really want to talk about it. Shattered


Sent from my iPhone using Tapatalk

[Saturnalian]

No more time. No more money. No more vroom vroom.


Sent from my iPhone using Tapatalk

[Marshy]

Get a Express post engine from graves

And pay the $10k with what? Buttons?

When your engine arrives, let us know! We all want to see it ;)

Seriously, did you have a bad night last night?

[Saturnalian]

It doesn't matter. IME they make it near f**king impossible for us Southerners to buy anything directly from them


Sent from my iPhone using Tapatalk

[JC]

Any news on this??

[shippy__]

hey hey the stars are starting to align

[Marshy]

It doesn't matter. IME they make it near f**king impossible for us Southerners to buy anything directly from them

There are ways.... (Shipito)


Any news on this??

Today is the day they let us know.....

[Phat3R]

Today is the day they let us know.....

After all this dry weather the gods are fucking me over with a massive great dildo ... showers ... fucking showers!

http://www.bom.gov.au/nsw/forecasts/sydney.shtml

[Marshy]

The weather is more Penriff than CBD: http://www.bom.gov.au/nsw/forecasts/penrith.shtml

Isolated showers doesn't mean much. Besides, the Creek has its own weather. I've been there when it's rained heavily in a circle all around the track for most of the day, but stayed dry all day for the track itself. It's probably all the methane emanating from the landfill....

[shippy__]

they have 9.... i they reckon they are going ahead

haven't told the wife yet.... that will be interesting !

[Marshy]

You'll just be at 'work' all day ;)

[shippy__]

just gota start and 430am and show all the boys my bike on my trailer ;)

[Marshy]

Got the call.... we are good to go!

[Mr.Ed]

I'll see you guys there, I won't be riding though

[Marshy]

I'll see you guys there, I won't be riding though

Shall we start calling you "Baddie" now or on Friday, Ed?

[Mr.Ed]

hahahha I thought my hand wasn't gonna be good enough to ride so I didn't even look into it... too late to get a race license in time. Next time, I suppose! ;) Plus I'm there on Saturday anyway.

[Marshy]

So the gearbox is out of one bike and into the other. This morning, an hour after I'd given up on the delivery and had taken the gearbox out of the 2nd bike, the new gearbox rocks up :doh:

Still got a crapload of work to do to get it ready, but getting excited for tomorrow!! :rockon:

[Phat3R]

Spare bike = options for spares ... so you intending on bringing both tomorrow?

[Marshy]

I'm gonna go out on a limb and suggest that this one won't be ready by morning...... (waiting on a new frame, among many other bits). And I had to rob Peter to pay Paul by nicking the gearbox out of this one for the other one.

http://tarmactalk.com/images/apart.jpg

[Phat3R]

I'm gonna go out on a limb and suggest that this one won't be ready by morning......

Yeah ... I think you might be right ... ;) Well at least you've got a whole working one ...

[Marshy]

Well at least you've got a whole working one ...

I hope so! Today will tell if that's true.

[Marshy]

And a good time was had by all in the TT garage today!

http://tarmactalk.com/images/TT-garage.jpg

[BoB]

Top day for it , and exceptionally quiet too , plenty of track and not many bikes or cars out there today

787

[BoB]

Any news on the r6 gremlins Shippy ?

Nick has the ape reset itself yet ?

How was the new shock feeling Rick ?

[Marshy]

It will come apart again on the weekend (unless running it up on the rear stand a couple of mornings in a row is enough to reset it). I'm also gonna research what computer thingie I need to access under the hood....

[shippy__]

First thing in the morning Marshy closed 1 eye and kicked my front end straight as it was twisted from rolling over at wakey.

First session I took it easy just making sure the bike was back to its normal self, which it was.

Second sesh I let everybody leave 30sec in front of me for some clean air, ended up 1 sec of my PB just by staying smooth and relaxed... I was happy with that

3rd sesh bike wouldn't start.. No power to the fuel pump, we all had a fiddle with and to no avail..... its not the fuel pump thanks rick for lending me yours, So I will take the fairings off and have a look around the wiring that I fiddled with the day before, I will also check to see if its throwing any codes

I achieved what I set out to do, and that was to make sure the bike was handling the way it used too, also to make sure my shoulder wasn't still rooted, Its ok

Thanks for everybody's help






and It was a good day in the shed by all

[Phat3R]

Any news on the r6 gremlins Shippy ?

Nick has the ape reset itself yet ?

How was the new shock feeling Rick ?

Thanks for the hand moving garages Rob.

Overall I had a good day ... the new shock was way better than the old setup ... after Nick's massive help dialing in some suspension settings it was feeling solid. I have had so little track time combined with new bike that I have not been overly comfortable / confident, but that's started to turn a corner yesterday.

Although Spilly did go past me in session 3 like I was standing still. ;) And I managed to do a massive stoppie, avoiding the green ZX10 who's early braking in old T9 really caught me out. I was so lucky to stay on, I thought I was going to face plant it.

Hope Shippy gets to the bottom of his starting troubles. We should have done a permanent tank swap, your tank looks prettier than mine. ;)

[Leezx10r]

Had a great day at the creek yesterday, need to find out what the problem is with the esd ohlins steering damper, (dam 3c code!!!)

Thanks to marshy for giving me some points / tips which were very helpful, still working on them as Rick found out on my cool down lap ;) sorry about that! just get the hose out on the leathers and all will be well :)

But all in all a great day, still got a lot of learning to do, but if it was easy, every man and his dog would do it


Sent from my iPhone using Tapatalk

[Phat3R]

Thanks to marshy for giving me some points / tips which were very helpful, still working on them as Rick found out on my cool down lap ;) sorry about that! just get the hose out on the leathers and all will be well :)

JMJ I came close to taking us both out. At least I know the new R6 stops well on just one wheel. ;-)

Not a problem, I hosed out the leathers today! It's true what people say ... I am full of it! :-)

[Marshy]

Thanks to marshy for giving me some points / tips which were very helpful, still working on them as Rick found out on my cool down lap ;) sorry about that! just get the hose out on the leathers and all will be well :)

Mate, I found some footage of when I followed you for a little bit. As you can see, you brake way too much, slowing right down for initial turn-in, then as you settle in for the turn, you are hard on the gas to get back up to normal corner speed heading towards the apex. You need to be tipping in at the speed you intend to carry through the middle of the turn (actually, you should tip in faster, because the front tyre will wash off a heap of speed on its own, plus any trail braking you also do).

The footage doesn't show it that well, but going into T10 particularly I had to jump on the brakes to not hit you!


http://youtu.be/OgQeDpQstxA

[Leezx10r]

That is excellent info and footage to help with improved riding.
As you said marshy, lines are ok, exit is ok, just need to work on entry speed to help improve over all package.
That Video is great info, thanks marshy. :)


Sent from my iPhone using Tapatalk

[Marshy]

No, the thumbnail isn't from on board Wetty's bike. It's his close pass on me at the ARDC day the other day. I was expecting it, but it still made me flinch a little! ;)


http://youtu.be/ZDbMuu1iAjA

[chubb]

He's looks really really big on a teeny tiny bike. Hahah

[Phat3R]

LOL ... yeah I flinched watching it ... Nick can I X post that on the 'other forum'?

BTW .. did you get your electrickery sorted, or are you now working out how to get that Ape Navigator system? I saw a post from the US site, where a guy picked one up from an Ape Dealer that was going out of business. But still needs a new code every 12 months for updates. All looks very convoluted.

[shippy__]

haha wetty keeping you on your toes...... I like it

that would have been really close though

[Mr.Ed]

hahhaa the old fox even pulled a 'Rossi' under brakes into T2!

[Marty]

No, the thumbnail isn't from on board Wetty's bike. It's his close pass on me at the ARDC day the other day. I was expecting it, but it still made me flinch a little! ;)


http://youtu.be/ZDbMuu1iAjA

I notice he still likes to swerve all over the main straight every lap wtfs with that?

[Kimbo]

Gee I should have kept up on this. I would have come out now I am an ARDC member

[Mstevo]

No, the thumbnail isn't from on board Wetty's bike. It's his close pass on me at the ARDC day the other day. I was expecting it, but it still made me flinch a little! ;)

you expect anything less from the wet one???

[Marshy]

Gee I should have kept up on this. I would have come out now I am an ARDC member

Would be good to see you there!! There's one pretty much every month. Keep an eye out here, or check the calendar: http://tarmactalk.com/forum/calendar.php

[Kimbo]

I will Marshy. I need some RSV4[$} time before August PI

[Marshy]

I will Marshy. I need some RSV4[$} time before August PI

Yes yes, me too! ;)

Looking forward to joining you in the BEARs races, trading RSV4 paint....

[Negrogrande]

No, the thumbnail isn't from on board Wetty's bike. It's his close pass on me at the ARDC day the other day. I was expecting it, but it still made me flinch a little! ;)


http://youtu.be/ZDbMuu1iAjA


reminds me alot of this http://youtu.be/9SdurM39V5M?t=5m46s

:D

[Slow bro]

Man that was close.

[Mr.Ed]

Yep, been there myself too... sometimes too close is not close enough apparently. :noidea:


https://www.youtube.com/watch?v=iG9pQ9vpIeU

[chubb]

Yep, been there myself too... sometimes too close is not close enough apparently. :noidea:


https://www.youtube.com/watch?v=iG9pQ9vpIeU

That shit pisses me off.

It's a track day not race day. Don't care how quick you are.... Pass safely!!! We all want to get the bike home in one piece.

Unless that was of course a race

[Marshy]

reminds me alot of this http://youtu.be/9SdurM39V5M?t=5m46s

:D

Honestly, that never gets old!! I can watch that over and over and over....

[Kimbo]

Yes yes, me too! ;)

Looking forward to joining you in the BEARs races, trading RSV4 paint....
Marshy you will be up the pointy end. I am a gentleman racer,

[Kimbo]

That shit pisses me off.

It's a track day not race day. Don't care how quick you are.... Pass safely!!! We all want to get the bike home in one piece.

Unless that was of course a race

Ha, Thats Wetty for you,

[Marshy]

Yep, been there myself too... sometimes too close is not close enough apparently. :noidea:


https://www.youtube.com/watch?v=iG9pQ9vpIeU

See, the gubbermint was right - smoking is dangerous!!


(See what I did there? It says Marlboro on the other bike....)

[Phat3R]

Nick ... the Wet One suggested the rest of your close pass sessions video also worth watching ...

[Phat3R]

Yep, been there myself too... sometimes too close is not close enough apparently. :noidea:


https://www.youtube.com/watch?v=iG9pQ9vpIeU

Did you get his number ??? :heh:

[James_]

That shit pisses me off.

It's a track day not race day. Don't care how quick you are.... Pass safely!!! We all want to get the bike home in one piece.

Unless that was of course a race

Too true!

Sure rubbing is racing and close riding is fun, but even in a race - low level club racing that is - no one is impressed by dodgy overtakes. aka BAD SPORTSMANSHIP!
More often than not it ruins both of the riders laps anyway.

[Marshy]

Nick ... the Wet One suggested the rest of your close pass sessions video also worth watching ...

It's not really, but here it is, for posterity. (It will be live at about 11am).


http://youtu.be/Ii8VurQY_z4

[Phat3R]

From 14:30 onwards that's quite good, bit of fun?

http://youtu.be/Ii8VurQY_z4?t=14m30s


It's not really, but here it is, for posterity. (It will be live at about 11am).


http://youtu.be/Ii8VurQY_z4

[Marshy]

http://tarmactalk.com/images/TT-garage.jpg

[Nelso]

Did you get his number ??? :heh:

It's Nigel Taylor if you want to know who it is.

[Nelso]

reminds me alot of this http://youtu.be/9SdurM39V5M?t=5m46s

:D

Why go down 4 gears at turn 1?:eek:

[Nelso]

He's looks really really big on a teeny tiny bike. Hahah

He says that about me.:ohwell:

[Little Mick]

It's Nigel Taylor if you want to know who it is.

actually it was Glenn from memory riding Nige's bike.

[Negrogrande]

Why go down 4 gears at turn 1?:eek:
4 gears? don't remember doing that but it is possible

It's possible, first time after big crash, I was doing 1:58's I think. I am yet to have a dry timed run with a working bike at the GP circuit since

[chubb]

Maybe he meant T2

[Negrogrande]

ah I see,

because I was a chicken shit :)

[Marshy]

I think you'd changed down all the way into reverse! ;)

[Lets Torque]

Yep, been there myself too... sometimes too close is not close enough apparently. :noidea:


https://www.youtube.com/watch?v=iG9pQ9vpIeU

a little touch up by old Nige Taylor... olde school racer... real nice bloke,wouldnt have meant to do that..

[Nelso]

Maybe he meant T2

I was definitely referring to turn 1, but I stuffed up. It was turn 2.:redface: