R6 YEC Engine Maintenance kit

[Saturnalian]

Hello,

As per the above title i have a couple of set of engine maintenance kits for R6 2008-2012 upwards for sale..

Each kit has the following parts to perform 1 x engine Maintenance

1 x GASKET, CYLINDER HEAD (t=0.45mm) Part- 2C0-11181-76

4 x PISTON RING SET Part- 2C0-11603-00

8 x CIRCLIP Part- 93450-16159

8 x BOLT, CONNECTING ROD Part- 2C0-1165A-00

8 x NUT Part- 90179-07001

16 x SEAL, VALVE STEM OIL Part- 4SV-12119-00

1 x GASKET, TENSIONER Part- 2C0-12213-00

1 x GASKET, STRAINER (Anti Stick type) Part- 2C0-13414-70

1 x GASKET, CRANKCASE COVER 1 (Anti Stick type) Part- 2C0-15451-70

1 x GASKET, CRANKCASE COVER 2 (Anti Stick type) Part- 2C0-15461-70

1 x SEAL, OIL (For Drive axle) Part- 93102-35017

1 x SCREW, CROSSRECESSED COUNTERSUNK (For bearing Housing) Part- 90151-06024

The following part is missing from the complete YEC Engine Maintenance kit......

1 x GSKT., 1 (Anti Stick type) Part- 2C0-15456-70

The Price- $ 240.00 each. PM me if you wants one.

J.

[Marshy]

Sounds like a good deal!

FYI, the YEC head gasket at 0.45 is the gasket of choice for raising your compression without significant additional tuning changes. The stock one is 0.60.

[shippy__]

ill take one


couldnt be happier to be honest.... I would like to do my top end shortly and that's a good start

[chubb]

Pm sent

[shippy__]

received and verry happy


lol funy story....... Saturnalin asked who to address it to I just said call it big gay shippy for shits and giggles, well I forgot all about and my grandfather was over yesterday painting.... there was a knock on the door and my half deaf grandfather answered lol

[Saturnalian]

Brilliant- I love a happy ending


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[chubb]

I bet you do

[Saturnalian]

I bet you do

I chuckle very loudly and quite often at your sense of humour Rancell....

[Saturnalian]

Yullo, I still gave one of these for sale if anybody wants.

On another note, for anyone who wants to go YEC R6 crazy. Anthony Quinn still has 2 sets of YEC cams and valve springs for sale very cheap, or so he tells me.

J.

[Marshy]

Didn't I see them on FX a while back for $1,500 a set? It's hardly cheap, although they are an awesome bit of kit.

[Saturnalian]

Didn't I see them on FX a while back for $1,500 a set? It's hardly cheap, although they are an awesome bit of kit.

How do you work that out Nick ? Yamaha pricing, (not even overinflated Australian pricing )will set you back a minimum of $ 2 500.00 for the cams and valve springs to suit
If you buy from a reseller like Superbiketoystore the same package is $ 4 140.00.

I don't understand your definition of cheap with this comment. It's certainly contradictory to mine but each to their own i guess

[Marshy]

To be honest, I didn't really think it through in that much detail! I stand corrected ;)

[Saturnalian]

It's still to much for me but Stu-52..... Well. Once Carl starts filling up those Trophy cabinets at home


Sent from my iPhone using Tapatalk

[Stu23]

hahaha

hmmm its not so much the cams, but also the stronger springs, retainers and Ti caps you need to do it properly .. 4k is about right..... and a refresh at least ! once a year

that and the fact race cams are now illegal in anything other than Formula OZ

[dan]

$4k yikes

[Marshy]

that and the fact race cams are now illegal in anything other than Formula OZ

Or St George.

Sooooooo, that would suggest that $1,500 is well on the exxy side, and that his potential target market is tiny...... bargain opportunity??

[Saturnalian]

Whatevs dude


Sent from my iPhone using Tapatalk

[Marshy]

Whatevs dude

Sorry Jamie, am I missing something here? Are you promoting them on behalf of Mr Quinn? Are you guys mates or something? In which case, I withdraw my previous statement, Your Honour, and submit to the court that the above sales proposal of $1.5k for used cams is an excellent deal, and I hereby encourage everyone to avail themselves of the limited-time opportunity.

In related news, I have a virtually new set of JSBK (Japan Superbike Spec) HRC cams for a CBR1000RR 08+ for sale, and I'd be happy with $500. They were run up on a dyno a few times only, and have never actually been raced with. I have a photo somewhere, which I'll dig out later.

[Saturnalian]

Never met the guy.

I like saying Whatevs dude.

You can't make me stop. None of you.... (Insert crazy laughter)


Sent from my iPhone using Tapatalk

[senator8]

I think Jamie's been on the energy supplements. He's so wired he's showing torque wrenches who's boss today ;)

[Saturnalian]

I hadn't touched that sprocket carrier since I fitted it over a year ago. I was lucky when I walked into the garage and stepped on the nut after a session realising it was mine. Scares me the most that it could just decide to snap off.


Sent from my iPhone using Tapatalk

[Saturnalian]

You know i've given this some thought overnight Nick, and i think you should probably buy all 3 sets off this Anthony Quinn dude now that you're running such a high spec and demanding motor.
You never know when things might go pop......

I can track his number down if you like....:panda::boink:

[Marshy]

https://i.chzbgr.com/maxW500/4639394304/hBAF474D9/