PDA

View Full Version : Turn 1 crash rebuild



Marshy
11-12-2013, 01:39 PM
So with the help of Mr Turner, the bike came out of the trailer today. It looks surprisingly ok. No visible frame damage, forks look straight (to the naked eye - they still need checking properly). The swingarm is scratched up, and there's a small puncture in the left side of the radiator. The clipons and levers etc all need replacing. The fairing stay too, and the wires have been ripped out of the O2 (or is it the intake temp?) sensor in the air intake, but I have a spare plug so that's easy fixed. The electronics look otherwise ok (PC5, quickshifter, ecu, reg/rec). Both wheels look slightly out of round, but just a little bent instead of creased, so I'm sure Laurie can roll them straight again.

Pics:

http://tarmactalk.com/images/crash1.jpg

http://tarmactalk.com/images/crash2.jpg

http://tarmactalk.com/images/crash3.jpg

http://tarmactalk.com/images/crash4.jpg

http://tarmactalk.com/images/crash5.jpg

http://tarmactalk.com/images/crash6.jpg

http://tarmactalk.com/images/crash7.jpg

http://tarmactalk.com/images/crash8.jpg

Stu23
11-12-2013, 01:45 PM
quite amazing seeing as where you parted ways !! normal sticky out bits to be expected, cant believe the tank , looks undamaged !!

chubb
11-12-2013, 01:57 PM
yeah can't believe the tank is unscuffed!

there will be two sensors in the air intake.. one for temp and the other for pressure...

I think the 06/07 only had the one for temp..

Laurie fixed the dent in my wheel so he should be able to fix yours!

dadat178
11-12-2013, 06:59 PM
That wheel chair looks dodgy, what's Medicare coming to.

Marshy
11-12-2013, 07:56 PM
That's a WorkCover approved safety wheelchair. Safe as houses. ;)

fitzy
11-12-2013, 09:08 PM
for a t1 mate doesnt look to bad at all .. and as above cant believe tank :) hope that foots on the mend

Mstevo
12-12-2013, 05:27 AM
breaking in your new racing boots already, glad to see you planning ahead ;-)

Marshy
12-12-2013, 06:50 AM
breaking in your new racing boots already, glad to see you planning ahead ;-)

They've got better side-flex protection than the Gaernes.....! :rofl:

mercho
12-12-2013, 11:49 AM
How is healing coming along Nick?

Marshy
12-12-2013, 03:35 PM
Actually pretty good, thanks mate. I'll get more news on Monday when I have a follow up with the doc, but it's feeling heaps better in general post-op. I'm actually thinking round 1 might be a possibility now....

How are you, mate?

Marshy
12-12-2013, 04:09 PM
Jeez we've got some good people on this forum! Big shout-out to BoB, who came over and stripped the bike down today. The forks are fine (untouched), and the front wheel & discs etc is likewise untouched. The rear wheel does have a minor little bend on the outer lip on one side, so off to Laurie's tomorrow to get rolled straight.

I prepped for a big shopping list, but the only things I actually need are a clutch cable and a stator cover! Obviously new clipon bars and new levers are also in order, but I have them in stock (I know a guy....). The radiator just has a small puncture on the very outside side panel (nowhere near the vanes), so it's going to the radiator shop tomorrow to get sorted. Should be an easy fix. Oh, and a steering stop has broken too, so I'll fix that up shortly too, following the how-to on this forum ;)

http://tarmactalk.com/images/crash9.jpg

Negrogrande
12-12-2013, 04:17 PM
Nice work, I'll see you this arvo

Marshy
12-12-2013, 04:25 PM
Tyre machine is back in action now too, thanks to Rob again.

Mr.Ed
12-12-2013, 04:54 PM
Wow... that came out a LOT cheaper than I thought! Good on you, mate! ;)

chubb
12-12-2013, 05:05 PM
I thought you did a how to on the steering stop????

chubb
12-12-2013, 05:06 PM
Awesome that it is a cheaper fix than you thought it was.

Mr.Ed
12-12-2013, 05:07 PM
I thought you did a how to on the steering stop????

and...


Oh, and a steering stop has broken too, so I'll fix that up shortly too, following the how-to on this forum ;)

chubb
12-12-2013, 06:15 PM
Don't mind me

England is my second language.

Mr.Ed
12-12-2013, 08:17 PM
Don't mind me

England is my second language.


As if... I barely speak Sydney

Medic!
12-12-2013, 11:37 PM
Yay Bob.:cheer: Wow that is good news. I only looked at it for a couple of mins to take pics on the day but I expected lots of bent major parts. Spose it was the sad looking fairing, the poor dash and all that oil distracting me from the true damage. Saw on facebook I think that you got your awning up too. Think we better keep an eye on you in case you start bunging on injuries:lie: to get the jobs done while you kick back lol.:suspicious::gossip:

mercho
13-12-2013, 06:41 AM
Actually pretty good, thanks mate. I'll get more news on Monday when I have a follow up with the doc, but it's feeling heaps better in general post-op. I'm actually thinking round 1 might be a possibility now....

How are you, mate?

Good to hear! All good, I should hopefully be ok for first round too!

Marshy
13-12-2013, 04:04 PM
Think we better keep an eye on you in case you start bunging on injuries:lie: to get the jobs done while you kick back lol.:suspicious::gossip:

You can trust me.....! I need some paving laid, Medic, whenever you're free before xmas. No pressure; it's only a few weeks labour.

:pound: :rofl: ;)

I'm having t-shirts made up too:

http://lessonsinspanish.files.wordpress.com/2011/12/the_worlds_greatest_moocher_tshirt-p235896264948165428zvt8r_4001.jpg

Medic!
13-12-2013, 06:13 PM
:pound::whip: Have to give Dan a few pointers he seems to be doing it the hard way.