What I did today...

[Phat3R]

Came upon a problem when installing the woodcraft key eliminator one of the plugs would not fit (single pin on the bike and 2 pin on the woodcraft piece) not sure what it does the bike does start its running rough tho sounds as if its sucking air.

Damn ... worth getting in touch with WC? Must be difference with US wiring and having no immobiliser? I was speaking with Ryan (ryan"AT"woodcraft-cfm.com). Do you have manual (http://www.r6messagenet.com/forums/pdf/LIT-11616-21-61.pdf) to look at the codes?

[jaswib]

I have emailed them with pics and we will see what comes back i did a huge rush job putting the bike back together so i may have missed something and maybe thats why the bike is running a bit funny( the bike sounds like it has a air leak and bogs down when i give it s squirt). I will report back on what they say and tomorrow ill go over the bike and see if its the woodcraft unit thats making the bike play up. Interesting about pehaps the diff wiring harness makes sense.

Sent from my SM-G920I using Tapatalk

[jaswib]

Damn ... worth getting in touch with WC? Must be difference with US wiring and having no immobiliser? I was speaking with Ryan (ryan"AT"woodcraft-cfm.com). Do you have manual (http://www.r6messagenet.com/forums/pdf/LIT-11616-21-61.pdf) to look at the codes?
So i took the bike apart and put it back together again. Then i reinstalled the ignition and ran the bike and then ran it with the WC product and took it for a hot lap around the block and the bike runs perfectly so no idea on what the extra plug does all it does is complete a circuit but it effects the bike in no way (must be a us model thing). Seems i must have missed something when i was rushing the other day.

Sent from my SM-G920I using Tapatalk

[Phat3R]

So i took the bike apart and put it back together again. Then i reinstalled the ignition and ran the bike and then ran it with the WC product and took it for a hot lap around the block and the bike runs perfectly so no idea on what the extra plug does all it does is complete a circuit but it effects the bike in no way (must be a us model thing). Seems i must have missed something when i was rushing the other day.

Great news!!! Mine arrived today - uber fast delivery - 2 days!

[windy]

Where did you guys buy them from?

[jaswib]

Where did you guys buy them from?
Got mine from Kurvey Gurl shipping was super fast.

Sent from my SM-G920I using Tapatalk

[jaswib]

Damn ... worth getting in touch with WC? Must be difference with US wiring and having no immobiliser? I was speaking with Ryan (ryan"AT"woodcraft-cfm.com). Do you have manual (http://www.r6messagenet.com/forums/pdf/LIT-11616-21-61.pdf) to look at the codes?
Just recieved this from wc

Hi Jason -*

*** You just answered all my questions! To confirm, no, the plug will not be needed for your model. And now that I know that the immobilizer has been flashed out there is no need to send you the instructions. You sir are good to go with the equipment you have! Please feel free to contact me with any questions.*


Sent from my SM-G920I using Tapatalk

[Phat3R]

Where did you guys buy them from?

Directly from Woodcraft USA. http://www.woodcraft-cfm.com/cgi-bin/commerce.cgi?search=action&category=KSEH

Got some camera mounts at the same time. http://www.woodcraft-cfm.com/cgi-bin/commerce.cgi?search=action&category=CMOO

[Phat3R]

Just recieved this from wc

Hi Jason -*

*** You just answered all my questions! To confirm, no, the plug will not be needed for your model. And now that I know that the immobilizer has been flashed out there is no need to send you the instructions. You sir are good to go with the equipment you have! Please feel free to contact me with any questions.*

W00t, we are good to go!

[RIPPERTON]

Rain Wheel Caddy

http://i37.photobucket.com/albums/e62/ripperton_2008/Electric%20R1/RAIN%20WHEELS%203_zpsoiu1u0az.jpg (http://s37.photobucket.com/user/ripperton_2008/media/Electric%20R1/RAIN%20WHEELS%203_zpsoiu1u0az.jpg.html)

http://i37.photobucket.com/albums/e62/ripperton_2008/Electric%20R1/RAIN%20WHEELS%204_zpsjzwi07bs.jpg (http://s37.photobucket.com/user/ripperton_2008/media/Electric%20R1/RAIN%20WHEELS%204_zpsjzwi07bs.jpg.html)

http://i37.photobucket.com/albums/e62/ripperton_2008/Electric%20R1/RAIN%20WHEELS%201_zpsitvqgpdg.jpg (http://s37.photobucket.com/user/ripperton_2008/media/Electric%20R1/RAIN%20WHEELS%201_zpsitvqgpdg.jpg.html)

[Ruckos87]

I like that.
I Just ordered a new trailer today so will have to fit up something for wets as well


Sent from my iPhone using Tapatalk

[Turbo]

Rain Wheel Caddy

http://i37.photobucket.com/albums/e62/ripperton_2008/Electric%20R1/RAIN%20WHEELS%203_zpsoiu1u0az.jpg (http://s37.photobucket.com/user/ripperton_2008/media/Electric%20R1/RAIN%20WHEELS%203_zpsoiu1u0az.jpg.html)

http://i37.photobucket.com/albums/e62/ripperton_2008/Electric%20R1/RAIN%20WHEELS%204_zpsjzwi07bs.jpg (http://s37.photobucket.com/user/ripperton_2008/media/Electric%20R1/RAIN%20WHEELS%204_zpsjzwi07bs.jpg.html)

http://i37.photobucket.com/albums/e62/ripperton_2008/Electric%20R1/RAIN%20WHEELS%201_zpsitvqgpdg.jpg (http://s37.photobucket.com/user/ripperton_2008/media/Electric%20R1/RAIN%20WHEELS%201_zpsitvqgpdg.jpg.html)

That's very cool! What's the axel bit at the top for, manoeuvring?

[RIPPERTON]

That's the handle bars.
Pick it up and the rear wheel touches the ground and it rolls along.
You could pull the whole thing down to the tire shop.

[Linden]

That's the handle bars.
Pick it up and the rear wheel touches the ground and it rolls along.
You could pull the whole thing down to the tire shop.

I would assume that it also stops flex

[Turbo]

That's the handle bars.
Pick it up and the rear wheel touches the ground and it rolls along.
You could pull the whole thing down to the tire shop.

Ah, great idea! I was wondering how it you wheeled it! :cool:

[BoB]

That's the handle bars.
Pick it up and the rear wheel touches the ground and it rolls along.
You could pull the whole thing down to the tire shop.

Very nice .:cool:

[Phat3R]

That's the handle bars.
Pick it up and the rear wheel touches the ground and it rolls along.
You could pull the whole thing down to the tire shop.

Cleva, waz it made of?

[RIPPERTON]

10mm 5083 ally.

[jaswib]

http://images.tapatalk-cdn.com/15/12/05/634b4ff080be45f8dd9fe70ba148b77e.jpg http://images.tapatalk-cdn.com/15/12/05/826d0e334897d748aac3866299fa4969.jpghttp://images.tapatalk-cdn.com/15/12/05/cee1e85b656385529d1690a9cd750404.jpg

Fresh vo2 fitted and a 520 kit installed now just to rivet the masterlink and I'm sorted for next weekend [emoji1]

Sent from my SM-G920I using Tapatalk

[Linden]

Nannnn Just trim the cable tie ... steady throttle ... what could possibly go wrong :nerd:

[Marshy]

Nannnn Just trim the cable tie ... steady throttle ... what could possibly go wrong :nerd:

Do this ^^^^

:pound: :rofl: :laugh:

[Little Mick]

after 2 days of scrutineering duties at Eastern Creek, today I got back to a work in progress.... turning up a new steering neck shaft for a custom frame with a Honda front end.


Needed to make a custom button die holder as I didn't have one to hold the button die to suit the M24x1 and M26x1 button die.
long story short.... all critical sizes done and first thread cut. (this one holds the top tree in place...) Material - 4140 (CrMo)

1571

next step is to cut the second thread that pulls against the bearings. Then its a turn around to finish the lower end.

Will post a few shots once complete...


Cheers

Little Mick

[zoidberg]

after 2 days of scrutineering duties at Eastern Creek, today I got back to a work in progress.... turning up a new steering neck shaft for a custom frame with a Honda front end.


Needed to make a custom button die holder as I didn't have one to hold the button die to suit the M24x1 and M26x1 button die.
long story short.... all critical sizes done and first thread cut. (this one holds the top tree in place...) Material - 4140 (CrMo)

1571

next step is to cut the second thread that pulls against the bearings. Then its a turn around to finish the lower end.

Will post a few shots once complete...


Cheers

Little Mick

My god that must be satisfying making your own bits and pieces you need! Top work!

[Leezx10r]

Looking good Mick.
You guys also did a great job over the weekend in some silly heat, thanks for your help [emoji106]

[Marshy]

Good day today.... First I played with my tool.... (seriously, how cool is this thing!):

http://tarmactalk.com/images/today-1.jpg





Then a christmas present arrived, all wrapped up. Wonder what it could be?

http://tarmactalk.com/images/today-2.jpg





Then sat back and admired the girls:

http://tarmactalk.com/images/today-3.jpg

[Little Mick]

18v fuel marshy?

Sent from my SM-N9005 using Tapatalk

[Little Mick]

My god that must be satisfying making your own bits and pieces you need! Top work!
Cheers Zoids. Yeah it has a sense of satisfaction [emoji41]. This one isn't for me though, but satisfying none the less.

Sent from my SM-N9005 using Tapatalk

[Little Mick]

Looking good Mick.
You guys also did a great job over the weekend in some silly heat, thanks for your help [emoji106]
Thanks Lee.
Sorry i couldnt chat much over the weekend. Things were a little hectic...

Yeah the heat got right up there. Didnt help wjen i got sunscreen in my eyes from lunchtime. Made checking stickers all the more challenging.

Sounds like everyone had a ball though. Minimal crashes and some awesome racing. If anyone missed it, go to the live streaming video on terrys fx site and watch the 600s and superbike races.

Championship decided by 1 point....

Sent from my SM-N9005 using Tapatalk

[Carl-52]

Bikes look pretty Nick... really pretty. Best scheme yet id say. And is that motor special already or going to become special?

[Marshy]

is that motor special already or going to become special?

Unfortunately not :( It's just a stock 2013 motor that had some head gasket issues, so it has had the top end refreshed (new cam chains, tensioners etc) and is ready for action again.... or it will be when the missing bits are put back on! It's going in a bike build.

[Ruckos87]

Best scheme yet id say.

Yet. Watch this space...



Sent from my iPhone using Tapatalk

[Ruckos87]

Played Tetris getting ready for Sunday. Can't wait for the new trailer to arrive...


Sent from my iPhone using Tapatalk

[Turbo]

Played Tetris getting ready for Sunday. Can't wait for the new trailer to arrive...

Did you get one made or are you picking one up??
PICS!! :cool:

[chubb]

Currently reset the geometry -8mm in the rear and +8mm in the front.

Hoping the weight is taken off the front and with the revalve should get a lot more front end feel and the bike to hold its line a lot better without fighting it too much. Can't reveal much more than that so we will see how we go!

[Ruckos87]

Did you get one made or are you picking one up??
PICS!! :cool:

Lashed out on a new one, pics mid Jan[emoji41]


Sent from my iPhone using Tapatalk

[jaswib]

Installed a g2 ergo billet quick throttle and some new domino grips. http://images.tapatalk-cdn.com/15/12/09/64aabb5ea4546ed7e6f2a47d4a45c7ee.jpghttp://images.tapatalk-cdn.com/15/12/09/2a48d60890aca8878b0878a568113220.jpghttp://images.tapatalk-cdn.com/15/12/09/d29459937ac37ca9e7492fca5812bf96.jpg now bring on wakefield [emoji1] [emoji1]

Sent from my SM-G920I using Tapatalk

[Phat3R]

Good day today.... First I played with my tool.... (seriously, how cool is this thing!):
http://tarmactalk.com/images/today-1.jpg
[/IMG]

OK ... WTF is this, an automatic wrench/toothbrush?

UPDATE - Google is my friend once I saw the M12 ... http://www.milwaukeetools.com.au/power-tools/cordless/m12/show/m12ir-21b

So ... should ya use regular sockets or impact sockets on that?

[Marshy]

OK ... WTF is this, an automatic wrench/toothbrush?

Automatic testicle clamp tightener ;)

Brett Harpur had one at the track and I fell in lust with it, so googled it myself and ordered one from total tools. Tops idea. Not real powerful though; it's not a replacement for a rattle gun. But it makes caliper bolts (and other longer bolts) much quicker to remove and refit. The light on the end is cool!! :cool:

[Metal-Man]

here's a hint ...

1588

[zoidberg]

That looks unreal! Full pic?

[Little Mick]

Finished the neck stem on Saturday.

Needed to pick up an M12 x 1.25 cap screw to hold it all together which I picked up yesterday.

New shaft ready for mock up. Bearings were old ones for trial fit purposes, but an new set and seals will be going in once the owner gets all the other bits n bobs ready.

http://i1173.photobucket.com/albums/r593/sophtayl/20151214_173644_zpsrhhodkeg.jpg (http://s1173.photobucket.com/user/sophtayl/media/20151214_173644_zpsrhhodkeg.jpg.html)



The lower tree needed to be removable as requested so I came up with a stepped spigot arrangement.

http://i1173.photobucket.com/albums/r593/sophtayl/20151214_173701_zpsq2bspoyz.jpg (http://s1173.photobucket.com/user/sophtayl/media/20151214_173701_zpsq2bspoyz.jpg.html)


the cap screw is tightened to clamp the lower tree in place.

http://i1173.photobucket.com/albums/r593/sophtayl/20151214_173812_zpseinslpp3.jpg (http://s1173.photobucket.com/user/sophtayl/media/20151214_173812_zpseinslpp3.jpg.html)

another objective was to allow the use of a neck stand for the track so the bolt was recessed further to give the required functionality..
http://i1173.photobucket.com/albums/r593/sophtayl/20151214_174010_zpsrs4lgwlt.jpg (http://s1173.photobucket.com/user/sophtayl/media/20151214_174010_zpsrs4lgwlt.jpg.html)

Threads are M24x1 and M26x1.
http://i1173.photobucket.com/albums/r593/sophtayl/20151214_174019_zpsyonzappg.jpg (http://s1173.photobucket.com/user/sophtayl/media/20151214_174019_zpsyonzappg.jpg.html)

Mock assembly - seal not installed
http://i1173.photobucket.com/albums/r593/sophtayl/20151214_174153_zpslwmvqtwg.jpg (http://s1173.photobucket.com/user/sophtayl/media/20151214_174153_zpslwmvqtwg.jpg.html)


Mock assembled on the Harris frame..

http://i1173.photobucket.com/albums/r593/sophtayl/20151214_174523_zpsqsc5vmmj.jpg (http://s1173.photobucket.com/user/sophtayl/media/20151214_174523_zpsqsc5vmmj.jpg.html)

ready for pick up :)

[Mr.Ed]

Can't wait to see that bike on the track!

[Little Mick]

Can't wait to see that bike on the track!

Likewise Ed. I'm sure there is a PCRA class for her

[Nelso]

Likewise Ed. I'm sure there is a PCRA class for her

What year frame and what engine is going in it?

Absolutely awesome head-stem too! It's a thing of beauty, pity it's going to be hidden!

[Little Mick]

What year frame and what engine is going in it?

Absolutely awesome head-stem too! It's a thing of beauty, pity it's going to be hidden!

Not sure Nelso. Early 80's I think. not 100% on the engine. The owner is still weighing up options :)

maybe I should have come up with an external head stem lol ;)

[Marshy]

Put the finishing touches on the new Flinstone 'Adidas'.

http://images.tapatalk-cdn.com/15/12/16/2dbbdc5587880236f29d45f645cbe4bf.jpg


Sent from my iPhone using Tapatalk

[Little Mick]

Like it marshy

Sent from my SM-N9005 using Tapatalk

[zoidberg]

Put the finishing touches on the new Flinstone 'Adidas'.

http://images.tapatalk-cdn.com/15/12/16/2dbbdc5587880236f29d45f645cbe4bf.jpg


Sent from my iPhone using Tapatalk

Outstanding.

[Little Mick]

Outstanding.

In standing actually lol

[zoidberg]

I knew there was a joke framed in that picture somewhere...

[Simmo]

What tyre pressures are you running there Marshy?


Sent from my iPhone using Tapatalk

[Marshy]

And they're off and running.... ;)


In standing actually lol

Lol :laugh:


I knew there was a joke framed in that picture somewhere...

HAHAHHAHAHAHAA!!! Boom tish. :pound:

[Marshy]

What tyre pressures are you running there Marshy?


Sent from my iPhone using Tapatalk

Yabbadabba dooo psi ;)


Sent from my iPhone using Tapatalk

[Marshy]

Finally finished off a customer dooocati. It's come up alright, I reckon:

http://tarmactalk.com/images/1198sp-1.jpg

http://tarmactalk.com/images/1198sp-2.jpg

http://tarmactalk.com/images/1198sp-3.jpg

[Little Mick]

Nice one marshy

Sent from my SM-N9005 using Tapatalk

[Phat3R]

Looks great Nick, customer will be happy with that!

You should of been handing out Superbike Source cards over the last 4 track days ... so many busted up bikes, in particular Doocati's to fix! Wonder how many will be permanently tracked now?

You could get SU recovery to slip one of your cards (or better yet a small sticker) onto every damaged bike they recover?

[Marshy]

You could get SU recovery to slip one of your cards (or better yet a small sticker) onto every damaged bike they recover?

Great idea!!!! :cool:

[Ruckos87]

Decided with the ape out of action for a little while that I'd be keeping the CBR as a2nd bike. So flushed the coolant with water, did an old and filter change and cleaned the air filter. I've had some fairings here for 7 or so mths so fitted them up to get her looking a bit neater http://images.tapatalk-cdn.com/15/12/28/ed01b5d8c5d1b6b5c9570733f2b16d3d.jpg http://images.tapatalk-cdn.com/15/12/28/06a8fca464404223e67bacaf5d354fa4.jpg

Found out that the fan wasn't cutting in I let it get to 114 then shut it off. Pretty sure it should kick in at 103??? On that note is there any issues with hard wiring the fan to run whenever the ignition is on? Apart from draw on the battery is there a reason not to do it???

Next it to Lock wire, but I'll need some lock wire pliers 1st. Does anyone stock then over the counter? Repco and super cheep didnt that know what I was talking about on the phone

Cheers Luke


Sent from my iPhone using Tapatalk

[Little Mick]

MCAS i think may

Sent from my SM-N9005 using Tapatalk

[senator8]

Preparing for a long overdue return from a unexpectedly long hiatus, in Feb hopefully.

What's changed on track in 14mths?
How quick are the groups lately?

http://images.tapatalk-cdn.com/15/12/28/a5448ed6244bb298848198e4787ab741.jpg

http://images.tapatalk-cdn.com/15/12/28/f16df8d7e7ad6a046df7a1ef4bbcfe5d.jpg

http://images.tapatalk-cdn.com/15/12/28/417e92c81663fe1a7d873d49ce1f90ff.jpg

http://images.tapatalk-cdn.com/15/12/28/ff96e60a0e637ed2125533c04d3d3166.jpg

[Ruckos87]

MCAS i think may

Sent from my SM-N9005 using Tapatalk

They did cheers


Sent from my iPhone using Tapatalk

[Turbo]

Decided with the ape out of action for a little while that I'd be keeping the CBR as a2nd bike. So flushed the coolant with water, did an old and filter change and cleaned the air filter. I've had some fairings here for 7 or so mths so fitted them up to get her looking a bit neater http://images.tapatalk-cdn.com/15/12/28/ed01b5d8c5d1b6b5c9570733f2b16d3d.jpg http://images.tapatalk-cdn.com/15/12/28/06a8fca464404223e67bacaf5d354fa4.jpg

Found out that the fan wasn't cutting in I let it get to 114 then shut it off. Pretty sure it should kick in at 103??? On that note is there any issues with hard wiring the fan to run whenever the ignition is on? Apart from draw on the battery is there a reason not to do it???

Next it to Lock wire, but I'll need some lock wire pliers 1st. Does anyone stock then over the counter? Repco and super cheep didnt that know what I was talking about on the phone

Cheers Luke


Sent from my iPhone using Tapatalk

Yiewww!! Fairings look a treat, Luke!! :cool: :cool:
No probs about a manual fan switch, very common practice. :thumb:

[Turbo]

Preparing for a long overdue return from a unexpectedly long hiatus, in Feb hopefully.

What's changed on track in 14mths?
How quick are the groups lately?

http://images.tapatalk-cdn.com/15/12/28/a5448ed6244bb298848198e4787ab741.jpg

http://images.tapatalk-cdn.com/15/12/28/f16df8d7e7ad6a046df7a1ef4bbcfe5d.jpg

http://images.tapatalk-cdn.com/15/12/28/417e92c81663fe1a7d873d49ce1f90ff.jpg

http://images.tapatalk-cdn.com/15/12/28/ff96e60a0e637ed2125533c04d3d3166.jpg

Glad to see you back, Rick!! Are you in for St George??
First turn is a left ;)

[BoB]

Decided with the ape out of action for a little while that I'd be keeping the CBR as a2nd bike. So flushed the coolant with water, did an old and filter change and cleaned the air filter. I've had some fairings here for 7 or so mths so fitted them up to get her looking a bit neater http://images.tapatalk-cdn.com/15/12/28/ed01b5d8c5d1b6b5c9570733f2b16d3d.jpg http://images.tapatalk-cdn.com/15/12/28/06a8fca464404223e67bacaf5d354fa4.jpg

Found out that the fan wasn't cutting in I let it get to 114 then shut it off. Pretty sure it should kick in at 103??? On that note is there any issues with hard wiring the fan to run whenever the ignition is on? Apart from draw on the battery is there a reason not to do it???

Next it to Lock wire, but I'll need some lock wire pliers 1st. Does anyone stock then over the counter? Repco and super cheep didnt that know what I was talking about on the phone

Cheers Luke


Sent from my iPhone using Tapatalk

Cannot remember off the top of my head but I think it cuts in around 108 and turns off around 104 . Unplug the fan and put 12v to it and it should work , once you know its working ok you can hard wire the cbr 600 to the high beam switch as well as having the auto cut in .(ie use the 12v + from the high beam connected to the 12v + supply to the fan .

[Ruckos87]

Cannot remember off the top of my head but I think it cuts in around 108 and turns off around 104 . Unplug the fan and put 12v to it and it should work , once you know its working ok you can hard wire the cbr 600 to the high beam switch as well as having the auto cut in .(ie use the 12v + from the high beam connected to the 12v + supply to the fan .

Cheers I actually got rid of the lights and running gear. ( might have them in a box of crap) But I'll test the fan tomorrow and make sure it's working 1st. If it is I might let it get a little hotter say 120 and see if it kicks in or not.


Sent from my iPhone using Tapatalk

[Marshy]

If it is I might let it get a little hotter say 120 and see if it kicks in or not.

If it doesn't cut in by 110 you've got a problem. No need to cook it any further than that. Most jap bikes kick in at 103, but BoB knows cbr600s better than anyone, so take his word on the temp.

Usually on 600s we wire in a manual fan switch, but there's no real reason you couldn't wire it to be 'always on' as you suggest. The reason road bikes are set to cut in over 100 degrees is to boil off any water/condensation in the oil, which isn't a problem we usually have here in Oz without snow and freezing overnight temps.


Sent from my iPhone using Tapatalk

[Marshy]

Preparing for a long overdue return from a unexpectedly long hiatus, in Feb hopefully.

What's changed on track in 14mths?
How quick are the groups lately?


Wooooohoooooo!!! Be good to have you back, mate!

Groups are the same... Totally depends on the day! ;)

Have you ridden since they resurfaced T4 and T9? It's grippier and slightly quicker, especially the exit of 9.


Sent from my iPhone using Tapatalk

[Ruckos87]

If it doesn't cut in by 110 you've got a problem. No need to cook it any further

Cool cool. I'll check the fans operational and look at hard wiring it on permanently


Sent from my iPhone using Tapatalk

[BoB]

Cool cool. I'll check the fans operational and look at hard wiring it on permanently


Sent from my iPhone using Tapatalk

here you go

http://www.tarmactalk.com/forum/showthread.php?57-cbr-600rr-fan-switch

just updated the pics as the links didn't work anymore

[Ruckos87]

here you go

http://www.tarmactalk.com/forum/showthread.php?57-cbr-600rr-fan-switch

just updated the pics as the links didn't work anymore

Legend !!![emoji482][emoji482][emoji482][emoji482][emoji482][emoji482]


Sent from my iPhone using Tapatalk

[BoB]

Legend !!![emoji482][emoji482][emoji482][emoji482][emoji482][emoji482]


Sent from my iPhone using Tapatalk

I will check the temps for the fan cut in off tomorrow and let you know

[chubb]

Preparing for a long overdue return from a unexpectedly long hiatus, in Feb hopefully.

What's changed on track in 14mths?
How quick are the groups lately?

http://images.tapatalk-cdn.com/15/12/28/a5448ed6244bb298848198e4787ab741.jpg

http://images.tapatalk-cdn.com/15/12/28/f16df8d7e7ad6a046df7a1ef4bbcfe5d.jpg

http://images.tapatalk-cdn.com/15/12/28/417e92c81663fe1a7d873d49ce1f90ff.jpg

http://images.tapatalk-cdn.com/15/12/28/ff96e60a0e637ed2125533c04d3d3166.jpg

it will be good to catch up with you Rick!

[dadat178]

Rick, the ram air ducts appear to have gone awol on the srad :smile:

[zoidberg]

Decided with the ape out of action for a little while that I'd be keeping the CBR as a2nd bike. So flushed the coolant with water, did an old and filter change and cleaned the air filter. I've had some fairings here for 7 or so mths so fitted them up to get her looking a bit neater http://images.tapatalk-cdn.com/15/12/28/ed01b5d8c5d1b6b5c9570733f2b16d3d.jpg http://images.tapatalk-cdn.com/15/12/28/06a8fca464404223e67bacaf5d354fa4.jpg

Found out that the fan wasn't cutting in I let it get to 114 then shut it off. Pretty sure it should kick in at 103??? On that note is there any issues with hard wiring the fan to run whenever the ignition is on? Apart from draw on the battery is there a reason not to do it???

Next it to Lock wire, but I'll need some lock wire pliers 1st. Does anyone stock then over the counter? Repco and super cheep didnt that know what I was talking about on the phone

Cheers Luke


Sent from my iPhone using Tapatalk

Torpedo7 have them, I got a set, easy to use, do what it says on the tin. Got them delivered in about 4 days when I ordered them.

http://www.torpedo7.com.au/products/T7TO4N0PW/title/torpedo7-safety-wire-plier---wire-combo

[BoB]

I will check the temps for the fan cut in off tomorrow and let you know
600rr 07-
Fan comes on @ 104 deg and goes off when temp drops to around 102 deg

digital temp displays "- -" below 34deg between 34 and 121 shows temp

between 122 and 131 flashes the temp display and the high coolant temp warning light comes on (might want to stop the engine )

Above 132 temp flashes "132" I think we might be in some trouble here..

[Ruckos87]

600rr 07-
Fan comes on @ 104 deg and goes off when temp drops to around 102 deg

digital temp displays "- -" below 34deg between 34 and 121 shows temp

between 122 and 131 flashes the temp display and the high coolant temp warning light comes on (might want to stop the engine )

Above 132 temp flashes "132" I think we might be in some trouble here..

Ta. Looks like I've got some fault finding to do.


Sent from my iPhone using Tapatalk

[BoB]

Ta. Looks like I've got some fault finding to do.


Sent from my iPhone using Tapatalk

Remove the plug to the fan and put 12v to the fan , just to make sure the fan is working ok , and also check the voltage to the fan at the plug . If no voltage to the fan then check that the relay under the seat is working.

[Ruckos87]

Remove the plug to the fan and put 12v to the fan , just to make sure the fan is working ok , and also check the voltage to the fan at the plug . If no voltage to the fan then check that the relay under the seat is working.


I'm chewing up this thread.... Whoops .

Tested the fan working fine on 12v swapped the relay with a spare from the headlight but no joy. Don't have a miluti meter to test the relay atm so I'll have to get back to this in the new year.


Sent from my iPhone using Tapatalk

[jaswib]

I'm chewing up this thread.... Whoops .

Tested the fan working fine on 12v swapped the relay with a spare from the headlight but no joy. Don't have a miluti meter to test the relay atm so I'll have to get back to this in the new year.


Sent from my iPhone using Tapatalk
Mmm maybe ride really fast that should provide ample airflow 😑

Sent from my SM-G920I using Tapatalk

[Marshy]

Mmm maybe ride really fast that should provide ample airflow [emoji58]

Sent from my SM-G920I using Tapatalk

This!!! :laugh:


Sent from my iPhone using Tapatalk

[Ruckos87]

Sorted. Dose this mean I can keep going slow? Or have I been going fast enough to not need the fan. [emoji848][emoji848][emoji848]

BoB cheers mate, I chucked a post on you fan switch thread as to what the issue was.


Sent from my iPhone using Tapatalk

[Marshy]

Torpedo7 have them

Thanks Nath: I forgot how much I like stuff from Torpedo7!! Thanks for the link - I just ordered $300 worth of tools and bits and bobs I don't really need but would be nice to have. They have a massive sale on at the moment.... nearly everything is 40% off (and it's cheap to start with). Bargains!! Sale ends today.

[zoidberg]

No worries! Sorry I made you spend more money... But if I saved you 40% off $300, does that mean I get 40% of a V02? :nod: I worked it out with calculators and science, it's all pretty good.

I actually need to grab one of those from you before end of the month, I will give you a buzz later next week.

[Marshy]

No worries! Sorry I made you spend more money... But if I saved you 40% off $300, does that mean I get 40% of a V02? :nod: I worked it out with calculators and science, it's all pretty good.

You got me with your legal mumbo jumbo!

http://2.bp.blogspot.com/_JXoJ_CV3m0s/TKFRyik0k8I/AAAAAAAAASk/BQ0x0u1om6Q/s1600/oh_no.jpg

[Marshy]

Mounted the new lie detector....

http://images.tapatalk-cdn.com/16/01/01/1467e21b8442fb38008ceb426ff00938.jpg

http://images.tapatalk-cdn.com/16/01/01/d77361f1053006f693511b8dabd67f03.jpg


Sent from my iPhone using Tapatalk

[Turbo]

Mounted the new lie detector....

http://images.tapatalk-cdn.com/16/01/01/1467e21b8442fb38008ceb426ff00938.jpg

http://images.tapatalk-cdn.com/16/01/01/d77361f1053006f693511b8dabd67f03.jpg


Sent from my iPhone using Tapatalk

Fuck yeah!! :thumb:
Looks ace! :cool: :cool:

[Leezx10r]

That's a proper job Mr M [emoji106]🏻

[Linden]

Pulled stupid face while drinking Coffee in the Ducati Café in Rome 1612

[Metal-Man]

finished fitting fairing ;-)

[Marshy]

finished fitting fairing ;-)

Pics?!?!?


Sent from my iPhone using Tapatalk

[Metal-Man]

Pics?!?!?


Sent from my iPhone using Tapatalk

nope ... not until after first TD ... can't fkn wait


hurry up an get those forks sorted :p

[Little Mick]

Been working on a modification to a rear wheel to fit the Harris.....

Had to machine the carrier, spacer, and boss/pocket so the carrier would move 8mm closer to the wheel. ( Wheel is off a CBR600)

Note- bearings will be replaced for final assembly so didn't remove them for machining as they are required for mocking up etc...

some candy for y'all....


https://youtu.be/70hDj1xKNTc


https://youtu.be/TuHo2C2VNMc

Cush drive rubbers will be customised as well

Cheers

Little Mick

[Leezx10r]

That's very cool Mick, great work mate [emoji106]🏻

[Marshy]

Coooool!! :thumb:

[zoidberg]

Been working on a modification to a rear wheel to fit the Harris.....

Had to machine the carrier, spacer, and boss/pocket so the carrier would move 8mm closer to the wheel. ( Wheel is off a CBR600)

Note- bearings will be replaced for final assembly so didn't remove them for machining as they are required for mocking up etc...

some candy for y'all....


https://youtu.be/70hDj1xKNTc


https://youtu.be/TuHo2C2VNMc

Cush drive rubbers will be customised as well

Cheers

Little Mick

Top work! How are you customising cush rubbers? As in making your own, or grinding down the current ones?

[zoidberg]

I put this lovely bit of titanium goodness on my bike. Sounds so much nicer than the micron I took off. And seems to pull harder.

http://imgur.com/a/Hm6bj

[Marshy]

Niiiiiiiiiice!!!


Sent from my iPhone using Tapatalk

[Mr.Ed]

Now that's live a healthy looking bike... live lactobacillus and all

[Turbo]

I put this lovely bit of titanium goodness on my bike. Sounds so much nicer than the micron I took off. And seems to pull harder.

http://imgur.com/a/Hm6bj

Yiewww!! Looks great mate! :thumb:

[Little Mick]

Cheers Guys


Top work! How are you customising cush rubbers? As in making your own, or grinding down the current ones?

for now will cut/ grind down originals, but once all complete, will most likely cast some rubber into a mould and look purty...

next on the list though is a new rear calliper mounting bracket .....

Cheers

Mick

[Little Mick]

I put this lovely bit of titanium goodness on my bike. Sounds so much nicer than the micron I took off. And seems to pull harder.

http://imgur.com/a/Hm6bj


sweet.. bling is always nice, especially lightweight bling

[Little Mick]

yesterday and today was more about this...

http://i1173.photobucket.com/albums/r593/sophtayl/20160110_133543_zpsser10i5d.jpg (http://s1173.photobucket.com/user/sophtayl/media/20160110_133543_zpsser10i5d.jpg.html)


before I could get to this...

http://i1173.photobucket.com/albums/r593/sophtayl/IMG-1452405843567-V_zps7mhcyong.jpg (http://s1173.photobucket.com/user/sophtayl/media/IMG-1452405843567-V_zps7mhcyong.jpg.html)

ride planned Friday thru Sunday....:madgrin:

[Carl-52]

I put this lovely bit of titanium goodness on my bike. Sounds so much nicer than the micron I took off. And seems to pull harder.

http://imgur.com/a/Hm6bj

Arata Systems are the absolute bomshizzle, bees knees, super dooper awesomnessest... epic work getting one zoidberg. it will be more powerfull and its sooooooo lightweight.

[zoidberg]

Cheers Carl and others!

It was on my roadbike and I ripped it off before I sold it. Along with the power commander and velocity stacks I had mapped to it. I probably should have it remapped to my motor, but after the quick round the block a few times comparison to the system I had on there, wowsers... And it is soooo damn pretty! The welds, oh dear lord, the welds...

[KANGA]

Cheers Carl and others!

It was on my roadbike and I ripped it off before I sold it. Along with the power commander and velocity stacks I had mapped to it. I probably should have it remapped to my motor, but after the quick round the block a few times comparison to the system I had on there, wowsers... And it is soooo damn pretty! The welds, oh dear lord, the welds...
I bought cliffys full exhaust system and ecu you from him. Been running his tune with no issues. I would imagine it could be fine tuned but I haven't had any issues noticing any flat spots or lack of power.

[Binksy]

Chased around electrical bullshit all weekend on the ZX10r trying to figure out why it blew a couple of main fuses. Completly wasted my time found nothing except the fact the battery in my bike is for a 250 and has just over 1/2 the recommended cranking amps. Although it is actually in really good condition but ill be trying to find a bigger one

Also noticed a not too lovely sound coming from the starter motor? Guessing this is something I should try and rectify immediately. Vid of not nice sound below.

https://www.youtube.com/watch?v=2Z98N_8OX0Q

[Carl-52]

Give it a battery that is correct for the bikes rating and that sound may just disappear.

[Binksy]

Give it a battery that is correct for the bikes rating and that sound may just disappear.

Forgot to mention if I put starter pack on the bike that can start cars and it still makes the same noise just fires instantly. But yes current plan is to whack a new battery into it.

[Carl-52]

hmmmmm, its such a strange noise tho, like excessive gear whine or something.

[Little Mick]

Is starter releasing or meshing properly? I havent listened to it yet but description suggests gear mesh issues

Sent from my SM-N9005 using Tapatalk

[Little Mick]

Sounds like a version of space invaders....

Sent from my SM-N9005 using Tapatalk

[Binksy]

Sounds like a version of space invaders....

Sent from my SM-N9005 using Tapatalk

Which is kinda awesome, however I'd rather my bike didn't make those kinda sounds...

I do suspect I'll have to pull the starter out and have a look at it. Just really trying to avoid it as it's kinda annoying and time consuming removing throttle bodies and things. While not the hardest work there's a lot of connections and things which takes me a while to do and make sure I've done right, especially with the bazzaz plugged into everything in the universe and having not gone that deep into the 10 before.

[Marshy]

Which is kinda awesome

I thought so too!! Sounds great!! ;) :thumb:

[Marshy]

hmmmmm, its such a strange noise tho, like excessive gear whine or something.

Fan belt slipping :laugh: :pound:

[Carl-52]

Ive really thought about it now and its definitely the power band losing tension Marshy. You need the green one Binksy

[Marshy]

Ive really thought about it now and its definitely the power band losing tension Marshy. You need the green one Binksy

Power band!! Love it!!

http://www.quickmeme.com/img/09/09c42d1f6e74305143b3788afa256b3ce7a26ba2665f6b9053 b470f5e56ddb43.jpg

[Binksy]

Ive really thought about it now and its definitely the power band losing tension Marshy. You need the green one Binksy

Looked it up in service manual but I couldn't find it. What torque should I do it up to and is it Left hand thread? Can I get green ones from Officeworks? Sounds like something they could supply :P

[Carl-52]

Its universal dual thread with the security head bolts on it. Its designed to never wear out and be tamper proof but they always seem to run out. I run the reds from bunnings for better throttle response but Stu runs the greens you can get from the YEC supplier that are the real trick deal. they are .2 mm wider so you get less of a power hit.

[zooker]

Make sure you tension and locktight that power band correctly though. This is when my power band kicked in...
1615

And this is when it broke...
1616

[Carl-52]

16171618161916201621 Applied more stickers for the corresponding HP gain... and gave it a general clean

[Marshy]

What happened to the Superbike Source stickers?!?


Sent from my iPhone using Tapatalk

[Carl-52]

On my desk at the moment. Figuring out best placement... think i have it planned. Dont jump the gun Marshy hhahahah Im unsure on if i want to remove some scratched up crashed vinyl and tick them on or go over the marks.

[jaswib]

What happened to the Superbike Source stickers?!?


Sent from my iPhone using Tapatalk
Well i know i love my Superbike source stickers they gave me the advertised 3 seconds a lap. ☺

Sent from my SM-G920I using Tapatalk

[chubb]

Started working the 10 a lot more. Pretty happy with this result at Broadford today with traffic.

http://i1220.photobucket.com/albums/dd451/chubb35/FE5CC07A-9F0D-4CA7-AFD3-1B4DDAF6ABD9.jpg (http://s1220.photobucket.com/user/chubb35/media/FE5CC07A-9F0D-4CA7-AFD3-1B4DDAF6ABD9.jpg.html)

[Turbo]

Started working the 10 a lot more. Pretty happy with this result at Broadford today with traffic.

http://i1220.photobucket.com/albums/dd451/chubb35/FE5CC07A-9F0D-4CA7-AFD3-1B4DDAF6ABD9.jpg (http://s1220.photobucket.com/user/chubb35/media/FE5CC07A-9F0D-4CA7-AFD3-1B4DDAF6ABD9.jpg.html)

Yiewww!! Well done mate. Great riding! :thumb:

[Metal-Man]

not bad mate, my best there was 103.027

[chubb]

Was doing 59/60s later in the day. So very happy with what was achieved today. Had a go on the Honda 600 last session. What a blast. Miss the 600s

[Metal-Man]

thats flyin dude

[Marshy]

A bit of 4wd-ing today with Sicko

http://uploads.tapatalk-cdn.com/20160117/6b2e5cc645ea3aa6436e0d231d920b5f.jpg


Sent from my iPhone using Tapatalk

[jaswib]

Moved into the new house a couple of weeks ago and finally sorted the garage so the bikes can come home. Had to grind the floors and epoxy them and waterproofed the walls to keep her nice and dry. http://images.tapatalk-cdn.com/16/01/16/bf27a860e2690409ed35b1038c24ed28.jpg

Sent from my SM-G920I using Tapatalk

[Marshy]

Moved into the new house a couple of weeks ago and finally sorted the garage so the bikes can come home. Had to grind the floors and epoxy them and waterproofed the walls to keep her nice and dry.

Sent from my SM-G920I using Tapatalk

Looks good!!

[Little Mick]

http://uploads.tapatalk-cdn.com/20160117/44c10c9eaaf970766959cc9a3e753a98.jpg

http://uploads.tapatalk-cdn.com/20160117/52f8d921eeb0262f6a52758e6682e23e.jpg

3 days and 2000kms of the best roads i have ever ridden. 800kms of twisties in 1 day...


Brilliant weekend!

Sent from my SM-T355Y using Tapatalk

[Phat3R]

Bought one of these today - wheel tyre storage racks - tidied up the black round things that were all over the place very nicely.

http://www.supercheapauto.com.au/online-store/products/SCA-Wheel-Tyre-Storage-Rack-120kg.aspx?pid=380334#Recommendations

[zoidberg]

A bit of 4wd-ing today with Sicko

http://uploads.tapatalk-cdn.com/20160117/6b2e5cc645ea3aa6436e0d231d920b5f.jpg


Sent from my iPhone using Tapatalk

Owen looks guilty.

[zoidberg]

http://uploads.tapatalk-cdn.com/20160117/44c10c9eaaf970766959cc9a3e753a98.jpg

http://uploads.tapatalk-cdn.com/20160117/52f8d921eeb0262f6a52758e6682e23e.jpg

3 days and 2000kms of the best roads i have ever ridden. 800kms of twisties in 1 day...


Brilliant weekend!

Sent from my SM-T355Y using Tapatalk

I hear nothing but good things about the roads up there. Will do the ride one day. Nice one!

[Turbo]

Moved into the new house a couple of weeks ago and finally sorted the garage so the bikes can come home. Had to grind the floors and epoxy them and waterproofed the walls to keep her nice and dry.

Sent from my SM-G920I using Tapatalk

Yieww!! That'll make a nice workshop :)

[Turbo]

Bought one of these today - wheel tyre storage racks - tidied up the black round things that were all over the place very nicely.

http://www.supercheapauto.com.au/online-store/products/SCA-Wheel-Tyre-Storage-Rack-120kg.aspx?pid=380334#Recommendations

Marshy, we NEED some of these!!

[Turbo]

Owen looks guilty.

Taken moments before we smashed up both of the foot rails!! Worth it tho, totally worth it :lol:

[Turbo]

3 days and 2000kms of the best roads i have ever ridden. 800kms of twisties in 1 day...


Brilliant weekend!

Sent from my SM-T355Y using Tapatalk

Where is this, Mick? This looks amazing!! :cool: :cool:

[Little Mick]

This was mt hotham but generally the whole region there in Victoria around omeo tallengatta bruthen etc is brilliant.

Sent from my SM-N9005 using Tapatalk

[Jakels]

A bit of 4wd-ing today with Sicko

http://uploads.tapatalk-cdn.com/20160117/6b2e5cc645ea3aa6436e0d231d920b5f.jpg


Sent from my iPhone using Tapatalk



Owen looks guilty.

Location:

https://encrypted-tbn3.gstatic.com/images?q=tbn:ANd9GcQBgHhAv4shjiae1A1CvBzWNoLjqCkrq 2UyZFyLGsxX68iDYROB4P59HxBRQw

[Turbo]

Location:

https://encrypted-tbn3.gstatic.com/images?q=tbn:ANd9GcQBgHhAv4shjiae1A1CvBzWNoLjqCkrq 2UyZFyLGsxX68iDYROB4P59HxBRQw

:rofl: :pound:

[Binksy]

3 days and 2000kms of the best roads i have ever ridden. 800kms of twisties in 1 day...


Brilliant weekend!

Sent from my SM-T355Y using Tapatalk

Was the weekend for it!

1625

We did 1200km over 2 days including bonang hwy, run up to omeo, omeo hwy then up over falls (where we ran into Joe) then Mt Buffalo, Granya, Elliots way and Snowy Mtn from Kiandra to Adminaby. Was a great reminder about how much fun the roady is!

[jaswib]

Was the weekend for it!

1625

We did 1200km over 2 days including bonang hwy, run up to omeo, omeo hwy then up over falls (where we ran into Joe) then Mt Buffalo, Granya, Elliots way and Snowy Mtn from Kiandra to Adminaby. Was a great reminder about how much fun the roady is!
The Bonang hwy now that is a beautiful bit of road. ☺

Sent from my SM-G920I using Tapatalk

[Baddie]

Time to bring the old girl out....But shes bleeding alittle...[emoji27]
New gasket time...
http://uploads.tapatalk-cdn.com/20160120/a1fec4865d9020763159ac3405f2cf92.jpg

Sent from my SM-N915G using Tapatalk

[Marshy]

Time to bring the old girl out....But shes bleeding alittle...[emoji27]
New gasket time...
http://uploads.tapatalk-cdn.com/20160120/a1fec4865d9020763159ac3405f2cf92.jpg

Sent from my SM-N915G using Tapatalk

She's crying from lack of attention ;)

[Marshy]

nope ... not until after first TD ... can't fkn wait


hurry up an get those forks sorted :p

Who's a lucky boy then:

http://tarmactalk.com/images/matris-carts-1.jpg

[Metal-Man]

Who's a lucky boy then:

http://tarmactalk.com/images/matris-carts-1.jpg

can i come an pick them up, can I, can I??

Drooooooooooooooooooooooooolllllllllllllllllllllll !!!!!!

[Marshy]

Yah man, as soon as I put them together ;)

These are such a nice bit of kit!!

Oh, the importer mentioned they had a Matris R6 steering damper in stock, if anyone is interested. $695


Sent from my iPhone using Tapatalk

[chubb]

Matris is a nice bit of kit

[Metal-Man]

Yah man, as soon as I put them together ;)

These are such a nice bit of kit!!

Oh, the importer mentioned they had a Matris R6 steering damper in stock, if anyone is interested. $695


Sent from my iPhone using Tapatalk

ooooh nice

[Turtle]

Did some shopping today, and picked a couple nice piece.
-my original snowflake screen arrived from Kawasaki as they forgot to send it out with the bike haha.

-Set of Rizoma pick ups
-TechSpec grip pads
-New sprocket to drop a tooth on the front

1633
1634
1635
1636

[Marshy]

It's really a very very nice bike!

[Turtle]

It's really a very very nice bike!

Come take it for a spin :D hahaha

[zoidberg]

Did some shopping today, and picked a couple nice piece.
-my original snowflake screen arrived from Kawasaki as they forgot to send it out with the bike haha.

-Set of Rizoma pick ups
-TechSpec grip pads
-New sprocket to drop a tooth on the front

1633
1634
1635
1636

Very nice mate! Up until the current model, I haven't wanted a ZX10 since the 04-05 model, but man, that is one sweet ride! Top stuff.

[Marshy]

can i come an pick them up, can I, can I??

Drooooooooooooooooooooooooolllllllllllllllllllllll !!!!!!

Done. And damn they feel awesome!!

http://uploads.tapatalk-cdn.com/20160123/4dcf145afe24cf88048844f74cbc4561.jpg


Sent from my iPhone using Tapatalk

[Metal-Man]

finished it off completely today (apart from sponsor decals and my "metal-man" decal (which will go thru the large black section on sides)

I know I said I wouldn't post pic, but I knew u kunts can't wait so.

1645164616471648

[triumph]

looks nice mate.
l

[Turbo]

Nice work, Cam!
Look forward to hearing how the Matris go :thumb:

[Marshy]

That is beautiful!!


Sent from my iPhone using Tapatalk

[Metal-Man]

the other thing thats bugging me now, is the Master Cylinder I got from Tim SBS on facebook, is weeping brake fluid at the bleed nipple. Already messaged him about it, and he said to see if there is anything that could be stopping it from seating properly, and suggested take the nipple off and have a look.
Well I did that, but couldn't see anytjing that would constitute a leak, so I sprayed it wil brake cleaner an dried it off, an reinserted the nipple, re-bled the system, and cable tied front brake lever on (to add pressure).
After dinner I check it again, and it was still weeping, but not as bad, but still weeping nonetheless.

[triumph]

try replacing the bleed nipple and see if that works .

[Phat3R]

finished it off completely today (apart from sponsor decals and my "metal-man" decal (which will go thru the large black section on sides)

I know I said I wouldn't post pic, but I knew u kunts can't wait so.

1645164616471648

Nice looking bike Cam.

[Little Mick]

looking sweet Cam

[chicken16]

Looks great Cam

[Kris]

Finished 95% of the SBK dyno work, time to give it a ride :D

[Turtle]

Nothing massive, but I'm bored and thought I'd share the piccies. Threw on the World SBK sticker that came with it, and took some shots of the nice blue the titanium exhaust is turning.

165116521653

[Marshy]

That exhaust looks awesome! <drooooool> Blued Ti is just a gorgeous material.

[jaswib]

Fitted new Bonamici rearsets and levers i like a short clutch lever so i kept my china lever on. Feels so much better dropped the pegs down heaps and will hopefully let me stretch out a bit. http://images.tapatalk-cdn.com/16/01/25/68b8b48e3f6d3b86556e614c77572c48.jpghttp://images.tapatalk-cdn.com/16/01/25/f5b08ef3d26bffd6118dd485d9fa91f7.jpghttp://images.tapatalk-cdn.com/16/01/25/2b263257e246fa6d98a510457197d560.jpg

Sent from my SM-G920I using Tapatalk

[Little Mick]

Made this for the Harris


Sent from my SM-N9005

[Nelso]

Made this for the Harris


Sent from my SM-N9005

Can you convince him to get rid of that CBR600 tail off it? It's a dead set crime to have that work of art you created on such an iconic bike and then have that ridiculous tail on it.:tsk:

[Little Mick]

I prefer the cafe racer tail myself

Sent from my SM-T355Y using Tapatalk

[Metal-Man]

done a little printing an decal application ... well Adam Edge did (metal-man decal an front number board)
I got home today an done the rest :p

and that front master cyl bleed nipple I had laeaking issues wih, sorted itself out, woohoo!!

BIG THANKS TO SHIPPY FOR DESIGNING THE METALMAN LOGO


165516561657165816591660

[triumph]

looking good there man .

[Leezx10r]

Looks great. Did you get your pitbull stand in Oz?

[Mr.Ed]

Can you convince him to get rid of that CBR600 tail off it? It's a dead set crime to have that work of art you created on such an iconic bike and then have that ridiculous tail on it.:tsk:

Can't say I disagree...

[Metal-Man]

Looks great. Did you get your pitbull stand in Oz?

nope

here

www.sportbiketrackgear.com

[Leezx10r]

nope

here

www.sportbiketrackgear.com

Sweet thanks mate

[shippy__]

Sweat az big boss






done a little printing an decal application ... well Adam Edge did (metal-man decal an front number board)
I got home today an done the rest :p

and that front master cyl bleed nipple I had laeaking issues wih, sorted itself out, woohoo!!

BIG THANKS TO SHIPPY FOR DESIGNING THE METALMAN LOGO


165516561657165816591660

[Turtle]

Picked up a new radiator guard and a tank bag since I commute on her everyday for work. Fits my smokes, wallet, phone, keys, and a can of Mother perfectly.

http://uploads.tapatalk-cdn.com/20160130/e0f091ec305ee2347ff75a279fabb7dd.jpg
http://uploads.tapatalk-cdn.com/20160130/fc238ab9fe51109caf33f0e9fd04ce9d.jpg


Sent from my iPhone using Tapatalk

[Marshy]

There's a new sub-forum for this thread, so post there instead! Here it is: http://tarmactalk.com/forum/forumdisplay.php?20-What-I-did-today