Metal-Man
14-01-2021, 07:57 PM
Yamaha 2008 R6 Race Bike.
Comes with fresh engine
Engine built late 2019
Full YEC SPEC RACE ENGINE (spent $15k, including run in on dyno & dyno tune. Dyno'd in Nov 2019)
Dyno'd by Jason at RACETUNE, Arndell Park, Nov 2019
Engine built by WET4U RACING in 2019
Went and lived overseas from Nov 2019 after getting bike dyno tuned, until May 2020
Full YEC Race Harness (new)/ECU
Dynonet Quickshifter (tuned on dyno for perfectly timed gear changes)
Dyno'd at 137hp (have dyno print out)
Fast Frank Racing Full Quick Wheel Change Kits (front n rear, meaning not having to remove calipers)
New front pads
Full Matris internals in forks.
Full Matris rear shock (not OEM with modded internals)
GB Racing engine crash protectors
Fully lockwired
Full Graves ti exhaust system W/ carbon muffler
Near new Blue 0-Ring chain
Original wheels have been Vapour Blasted and Polished
Spare wheels (One chrome front wheel/one silver rear)
Both wheel sets have Captive Wheels Spacers fitted
New Dunlop D212 tyres on the bike
Used D212 on spare rims with plenty of life left on em'.
H20 Race Radiator (New)
Race coolant (one track day old)
Overflow bottle fitted
Fresh brake fluid
Aftermarket Velocity Stacks
Braided lines
Brembo 19 RCS front master cyl
Push button start (no key)
WET4U RACING Rearsets
New hand grips
Crash knobs
Race stands (2 different types for the front, Kaneg and Woodcraft. Woodcraft Stand is used specifically for the quick wheel change kit on the front)
One rear race stand
Fresh brake fluid
2 sets of tyre warmers
2 Jerry cans (plastic 20L ea)
Static Wheel Balancer (for changing your own tyres to balance)
The Fast Frank Racing Full Quick Wheel Change Kits can make it possible to do lightning fast wheel changes in seconds. No need to remove front calipers or rear caliper.
Fast Franks youtube vid here
https://youtu.be/HXhG4RfxEwE
SPARES:
2 sets Tyres D212 new, one spare rear, all 190 rears
One set of used wets.
Spare front pads (new)
One spare clutch lever
2 spare handlebars. (clip-ons)
Spare set of crash knobs for engine/frame sliders
2 spare brake levers (Brembo)
Spare front sprocket (14t)
Spare bits an pieces for gear shifter
Spare Double bubble screen
There's probably other things that I've probably left out in description, but it's all here.
Just take to track and race it. Nothing else to spend on this well loved bike.
I've owned it since 2013 and it came with only 5,000km on odometer as a stat write off, raced it for 3.5 seasons then rebuilt engine with YEC SPEC internals.
Haven't used it except one track day. Since 2017
No longer have desire to ride it as I'm looking at moving overseas next year (2021).
No stupid offers or tyre kickers
Only serious buyers will be considered to look at this bike.
No doubt it's a season winning bike with a good rider on it. It chews up any other R6 on track easily.
To the person that buys this bike, I will pay for your first track day in full, 100%.
Any serious questions will be answered and any callers wanting more info will be happily given.
I'm not happy about parting with this bike as I've loved it like no other bike I've ever owned.
Reason for selling ... wanting retire overseas as soon as travel is allowed
Call anytime. During business hours. Or after hours until around 9:30/10pm.
Weekends anytime until 11pm.
If I've missed your call, I will return it when possible.
I don't have Facebook anymore, nor do I have "metalman Racing" fb page ... Only Youtube page with same name
For photos, please see gumtree link below; (have new pc as old one died and lost everything from hard drive, hence no pice in thei advert)
Alternatively, check out the gumtree advert
https://www.gumtree.com.au/s-ad/seven-hills/motorcycles/yamaha-r6-08-race-bike/1263611064
Negotiable on price as seen in gumtree
Advertised price is very reasonable with all the current mods and engine HP output ... This bike is unlike any other R6 on the track in Aust.
As I have mentioned, if you want more info/photos, please call me as I'm rarely on here.
Thanks.
Cam: 0400 370 183
Comes with fresh engine
Engine built late 2019
Full YEC SPEC RACE ENGINE (spent $15k, including run in on dyno & dyno tune. Dyno'd in Nov 2019)
Dyno'd by Jason at RACETUNE, Arndell Park, Nov 2019
Engine built by WET4U RACING in 2019
Went and lived overseas from Nov 2019 after getting bike dyno tuned, until May 2020
Full YEC Race Harness (new)/ECU
Dynonet Quickshifter (tuned on dyno for perfectly timed gear changes)
Dyno'd at 137hp (have dyno print out)
Fast Frank Racing Full Quick Wheel Change Kits (front n rear, meaning not having to remove calipers)
New front pads
Full Matris internals in forks.
Full Matris rear shock (not OEM with modded internals)
GB Racing engine crash protectors
Fully lockwired
Full Graves ti exhaust system W/ carbon muffler
Near new Blue 0-Ring chain
Original wheels have been Vapour Blasted and Polished
Spare wheels (One chrome front wheel/one silver rear)
Both wheel sets have Captive Wheels Spacers fitted
New Dunlop D212 tyres on the bike
Used D212 on spare rims with plenty of life left on em'.
H20 Race Radiator (New)
Race coolant (one track day old)
Overflow bottle fitted
Fresh brake fluid
Aftermarket Velocity Stacks
Braided lines
Brembo 19 RCS front master cyl
Push button start (no key)
WET4U RACING Rearsets
New hand grips
Crash knobs
Race stands (2 different types for the front, Kaneg and Woodcraft. Woodcraft Stand is used specifically for the quick wheel change kit on the front)
One rear race stand
Fresh brake fluid
2 sets of tyre warmers
2 Jerry cans (plastic 20L ea)
Static Wheel Balancer (for changing your own tyres to balance)
The Fast Frank Racing Full Quick Wheel Change Kits can make it possible to do lightning fast wheel changes in seconds. No need to remove front calipers or rear caliper.
Fast Franks youtube vid here
https://youtu.be/HXhG4RfxEwE
SPARES:
2 sets Tyres D212 new, one spare rear, all 190 rears
One set of used wets.
Spare front pads (new)
One spare clutch lever
2 spare handlebars. (clip-ons)
Spare set of crash knobs for engine/frame sliders
2 spare brake levers (Brembo)
Spare front sprocket (14t)
Spare bits an pieces for gear shifter
Spare Double bubble screen
There's probably other things that I've probably left out in description, but it's all here.
Just take to track and race it. Nothing else to spend on this well loved bike.
I've owned it since 2013 and it came with only 5,000km on odometer as a stat write off, raced it for 3.5 seasons then rebuilt engine with YEC SPEC internals.
Haven't used it except one track day. Since 2017
No longer have desire to ride it as I'm looking at moving overseas next year (2021).
No stupid offers or tyre kickers
Only serious buyers will be considered to look at this bike.
No doubt it's a season winning bike with a good rider on it. It chews up any other R6 on track easily.
To the person that buys this bike, I will pay for your first track day in full, 100%.
Any serious questions will be answered and any callers wanting more info will be happily given.
I'm not happy about parting with this bike as I've loved it like no other bike I've ever owned.
Reason for selling ... wanting retire overseas as soon as travel is allowed
Call anytime. During business hours. Or after hours until around 9:30/10pm.
Weekends anytime until 11pm.
If I've missed your call, I will return it when possible.
I don't have Facebook anymore, nor do I have "metalman Racing" fb page ... Only Youtube page with same name
For photos, please see gumtree link below; (have new pc as old one died and lost everything from hard drive, hence no pice in thei advert)
Alternatively, check out the gumtree advert
https://www.gumtree.com.au/s-ad/seven-hills/motorcycles/yamaha-r6-08-race-bike/1263611064
Negotiable on price as seen in gumtree
Advertised price is very reasonable with all the current mods and engine HP output ... This bike is unlike any other R6 on the track in Aust.
As I have mentioned, if you want more info/photos, please call me as I'm rarely on here.
Thanks.
Cam: 0400 370 183