PDA

View Full Version : Advice on Fixing Fibreglass Race Fairings



windy
15-07-2013, 05:41 PM
G'day Guys,

So I am having a go at fixing my fairings.

(Sorry Marshy - thought I would have a go before I buy new ones, I figure its a good thing to try and learn)

So I have read heaps on the web about how to etc, but I thought the best place to go to was you guys that have plenty of experience.

6867

Hopefully the two photos uploaded, but I was wanting to ask what the best way to fix the part that is missing? I am happy with how to fix the cracks but just not sure about the large part that's missing.

I thought of maybe cutting up an ice cream lid or something and taping it over the area on the outside. But the Fairing has several cracks around the area and isn't really holding shape.

Cheers guys,

Nathan

chubb
15-07-2013, 06:04 PM
I have fixed up minor repairs with smaller holes.. but one as big as that, i would probably whack it back in the mould it came out of to try to repair that big hole

windy
15-07-2013, 06:11 PM
I have fixed up minor repairs with smaller holes.. but one as big as that, i would probably whack it back in the mould it came out of to try to repair that big hole

Hmm thanks Chubb, Unfortunately I don't know what brand they are for the mould.. I might be biting off more then I can chew here.. Might give it a go somehow, if it fails I will be ordering a new belly pan through marshy!

Marshy
15-07-2013, 06:27 PM
Your ice cream container lid idea is as good as any. You just need a backing (ie a mould) to shape the new glass to. You can close the hole in stages, too; it doesn't have to be all in one large new sheet. Lay some glass over a bit less than half the hole, wait for it to set, then do the other section.

windy
15-07-2013, 06:44 PM
Your ice cream container lid idea is as good as any. You just need a backing (ie a mould) to shape the new glass to. You can close the hole in stages, too; it doesn't have to be all in one large new sheet. Lay some glass over a bit less than half the hole, wait for it to set, then do the other section.

Thanks Marshy, I was thinking of doing this, and also thought of fixing all the cracks up to get the fairing to hold shape.. I will give it all a go and keep you updated. Thanks again

Negrogrande
15-07-2013, 09:13 PM
it's amazing what you can do with a baking tin.

i rebuilt my bellypan as the previous owner hacked it to pieces so he could keep the side stand, it's not pretty but it works

windy
23-07-2013, 07:41 PM
G'day guys,
So I have successfully been able to fibreglass all the damage to my fairings.
For the large hole I cut up an ice cream container and shaped it. Plenty of tape and paddle pop sticks to get the desired shape. Not that hard really.
I am now in the process of filling it all with bog and sanding and shaping.. Very time consuming.
I am not to far off getting ready to spray them with primer filler and then having a go at putting some colour and clear coat..
Does anyone know where are good place to get a hvlp gravity feed spray gun would be? And also a good place for paint?
I have heaps of pics I can out up if anyone is interested.
Cheers
Nathan

chubb
23-07-2013, 08:22 PM
Definitely attach some pics

windy
24-07-2013, 06:05 PM
Here are some pics of what I have done guys, if you are interested.

Marshy
24-07-2013, 06:16 PM
Nice work! Very neat :thumb:

chubb
25-07-2013, 06:18 AM
Awesome work

Tristan
25-07-2013, 09:05 AM
Looking good dude

fitzy
08-08-2013, 07:39 PM
just seen this pics nathan done well ;) now ill have someone to do mine ;) wont be long and she will be all painted and ready to go again for September @

windy
15-08-2013, 10:11 AM
Hey guys, so the repair is coming along nicely. I thought I would throw a few more pics of where I am up to.. Finally got a bit of color going on! Hopefully be finished this weekend!!105106107

Marshy
15-08-2013, 10:13 AM
Niiiiice!! :thumb:

Stu23
15-08-2013, 10:26 AM
great job :) i have a similar prob with a missing piece i will have to fill in. Question.. if you use a temporary backing item to give the glass some shape, what do you use to stop the resin from sticking to it ?

windy
15-08-2013, 10:29 AM
Mate all I did was cut up an ice cream container the shaped it using paddle pop sticks. I did out anything on the ice cream plastic to stop it sticking and didn't have any problems. But I did read you can use a bit of talc powder not sure how that would go though.

Stu23
15-08-2013, 10:30 AM
thanks for that, will be giving it a go this weekend :)

windy
27-08-2013, 05:42 AM
Hey guys so I have just about finished fixing and painting my fairings, so thought I would show the finished product. 115116117

chubb
27-08-2013, 08:39 AM
Good job!

Little Mick
27-08-2013, 10:05 AM
looking good Windy

windy
08-09-2013, 01:11 PM
Just thought I would share the finished product.121122123124125126

senator8
08-09-2013, 01:27 PM
Looks great. Well done

Marshy
08-09-2013, 02:48 PM
Fantastic job!! Looks great. That'll be worth a couple of seconds, I reckon....

chubb
09-09-2013, 07:12 AM
That's a great job!

dan
18-09-2013, 09:57 PM
This looks great. Nice work!