X-factor.......?

[Marshy]

As most of you know, I haven't really found the magic with the new Aprilia. I think it just doesn't really suit my (600-bred) style. I'm still working on geometry, on rear linkages, on suspension setup etc, and I'm sure I'll get it working soon.

In the meantime, I really miss the good bits of the old model RSV4. Having (perhaps prematurely) sold the trick '14 with WSBK electronics recently, I couldn't resist a deal on a 2011 with a new '13 motor and some cams and pistons etc. The motor was built by Ben Reid, who is Australia's doyen of making the V4 go very fast. I've always wanted to see whether the 'old' motor, but with some extra ponies, would deliver the mid-range torque and corner exit drive that seems to be a bit lacking on the new bike but was the highlight of the old bike, without also getting hosed down the straight.

Enter the X:


http://tarmactalk.com/images/x-1.jpg

http://tarmactalk.com/images/x-2.jpg

http://tarmactalk.com/images/x-3.jpg

http://tarmactalk.com/images/x-4.jpg

http://tarmactalk.com/images/x-5.jpg

http://tarmactalk.com/images/x-6.jpg

http://tarmactalk.com/images/x-7.jpg

http://tarmactalk.com/images/x-8.jpg

[Turbo]

Ooooooooh, WOW!! There are some seriously trick bits on this bike!!
Did you notice the failures/differences when you had the #1 + #2 bikes back to back? Or did you get rid of the #2 before it was properly dialled in?

So, am I right in thinking this should feel like your previous #1 bike, before BMWgate, but with more power??

[Marshy]

So, am I right in thinking this should feel like your previous #1 bike, before BMWgate, but with more power??

That's the hope! My theory is that it doesn't have all the lightweight top-end internals to spin up as quickly as the '15, but yet with the raised comp, race pistons and cams, it'll have the old motor's thumpy torque but with more top end. Or I could be wrong. But I can't wait to find out!

I hardly did any laps at all on the '14, so I never gave it a good chance. But it had the stock motor, so no extra power, despite the trick electronics. The drive off the turns was still a standout compared to the '15. This one should have more ponies. Plus all the other good bits. I've never equipped a bike with this much aftermarket stuff! It's pretty cool :cool:

I love the clip-ons!! The triples are a work of art too.

It's got 30mm NIX carts, but there's a 'Reb' label over the Comp writing on the comp leg (they are usually comp on one fork and rebound on the other), so I'm hazarding a guess that it's been converted to a conventional cart setup, with rebound at the top of both and comp at the bottom. I'm keen to explore further!

[Ruckos87]

Very slick,
http://uploads.tapatalk-cdn.com/20160618/fa56062325abcec3e7f7e459e4845424.jpg



Sent from my iPhone using Tapatalk

[Turbo]

https://s-media-cache-ak0.pinimg.com/736x/5d/c3/56/5dc356d8d2afd52e978a35b8b9bed6e5.jpg

[Marshy]

:pound: :laugh: :rofl:

[Krackeye]

I'd seen this on FB. Notice it already had your name on it.

[chubb]

Very nice Nick!!


Sent from my iPhone using Tapatalk

[Leezx10r]

That's a monster nick, very nice! I saw this for sale, an the thought did cross my mind at the time [emoji106]🏻


Sent from my iPhone using Tapatalk

[Marshy]

He advertised it at the beginning of April, but nobody bought it. Surprised me, because it's a shitload of bike for the money. The motor alone is worth the price of admission, although I guess it's not as appealing as the '15-16 bike.
Then of course there's the potential overheads of having a modded motor. Reliability, cost, rebuild frequency etc.
But for me, it's perfect! It meets a clear need that I had - on paper at least. The proof will be in the pudding.


Sent from my iPhone using Tapatalk

[Ruckos87]

So clubsport next year?

-edit- if you still have it[emoji6]

Sent from my iPhone using Tapatalk

[Marshy]

So clubsport next year?

-edit- if you still have it[emoji6]


That's the plan! And the BEARS nationals, which includes the St George rounds at the Creek. Care to join me??

[Marshy]

Spec list:

• Brand new 2013 engine, one race meet old,
• Robby Moto pistons and cams,
• Aprilia SBK anti volume insert, jets, rails, and sprayer,
• Aprilia SBK head gaskets,
• Aprilia light weight DLC tappets, ported heads, race seats,
• Bazzaz fueling,
• Engine internals super finished,
• Undercut gearbox, and WSBK slipper clutch
• Ohlins forks, 30mm catridges with 105nm springs,
• Ohlins TTX rear shock with 105nm spring,
• Folding Brembo RCS19 master,
• Folding Brembo clutch lever,
• Brembo T drive disks,
• Brembo Z04 race pads and HEL braided lines;
• Full Akrapovic Evo 2 titanium system and Aprilia Corse ECU,
• IMA titanium triple clamp, and bars,
• Motion Pro quick action throttle;
• Techspec Tank Grips,
• Lightech carbon frame and swingarm covers,
• 520 chain conversion,
• Race Seat from Italy,
• Racers Edge fairings with WSBK colour and decal scheme,
• Accossato quick turn, keyless fuel cap,
• Push button start (no key), and aftermarket switch blocks,
• motoholders fairing stay,
• Top spec Lightech Folding rearsets (with some spares);
• GB racing case covers;
• Aprilia Racing frame sliders;
• Gilles tooling chain adjusters;

[Simmo]

So much bling-trickery and with your name already stickered on it. How could you not.
Just looking at it made we want to buy more parts I don't actually need but suddenly must have.
I can't wait to hear how she goes.
P.S. Who tidied your garage and how on earth will you find anything now?

[Marshy]

P.S. Who tidied your garage and how on earth will you find anything now?

It's always Owen's fault!!! Always. Even when it's not.


Sent from my iPhone using Tapatalk

[Ruckos87]

That's the plan! And the BEARS nationals, which includes the St George rounds at the Creek. Care to join me??

Maybe not nationals but deft all St George. I need to see how I go in August 1st


Sent from my iPhone using Tapatalk

[chicken16]

I'm not an Aprillia person but that makes me want one - badly. Very nice.

[BoB]

Very Nice there Nick.

[WRCPUG]

jesus thats a beauty...is that cade simpsons is saw for sale?

lucky man that things mint

[WRCPUG]

I just noticed the Race centre sticker on the fork....you better give Daz a call about what he's done. They do their valving a little different to most other tuners so what you would normally change adjust may not apply to those forks. If he has worked on it though it will be a weapon

[Turbo]

It's always Owen's fault!!! Always. Even when it's not.


Sent from my iPhone using Tapatalk

Oi!! I resemble that comment!! :lol:

[Carl-52]

Wow thats alot of extra machining and finishing in that motor. Easily over 6k worth just in superfinishing and dlc coat. Let alone the undercut box and head work.

[Marshy]

superfinishing and dlc coat.

I have no idea what these things mean. The rest I understand. He said almost $10k for the motor work, plus the cost of the new motor!

[Wolfie57]

Good work mate, will hopefully help you get your mojo back permanently.

Amazing spec list! I've just got used to the IMA triple clamps and I love them now, took a day or two to adjust.

Come and join Brett and I in BEARS nationals mate, its good to ride diff circuits. You can't join me in clubsport though otherwise ill grass you up for having a 13 motor :peep::peace:

PS Just swapped next Thurs to Weds so I can see you and Owen on your new steeds......

PPS Already told my Aprilia riding teammates........I know how you girls like to gossip about your bikes......

[Marshy]

Good work mate, will hopefully help you get your mojo back permanently.

Amazing spec list! I've just got used to the IMA triple clamps and I love them now, took a day or two to adjust.

Come and join Brett and I in BEARS nationals mate, its good to ride diff circuits. You can't join me in clubsport though otherwise ill grass you up for having a 13 motor :peep::peace:

PS Just swapped next Thurs to Weds so I can see you and Owen on your new steeds......

PPS Already told my Aprilia riding teammates........I know how you girls like to gossip about your bikes......

Thanks maaaate!! I'm hoping it will do the trick. I'm trying some stuff with The Fifteen too, so either way I plan on being fast again.

I'm def in for BEARS Nationals next year. And Clubsport! Fortunately for me, the motor year isn't a rule. Only the frame and compliance plate need to be compliant. :cheer: :behindsofa:

[Turbo]

PS Just swapped next Thurs to Weds so I can see you and Owen on your new steeds......


Fuck yeah!! Gonna be a great day!! :thumb:

[Wolfie57]

Thanks maaaate!! I'm hoping it will do the trick. I'm trying some stuff with The Fifteen too, so either way I plan on being fast again.

I'm def in for BEARS Nationals next year. And Clubsport! Fortunately for me, the motor year isn't a rule. Only the frame and compliance plate need to be compliant. :cheer: :behindsofa:

We'll just have to make sure we are out on track at the same time to keep the mojo flowing! I'll get the camera ready....

Bugger I should have got a newer motor put in :cry:

[Marshy]

We'll just have to make sure we are out on track at the same time to keep the mojo flowing! I'll get the camera ready....

Bugger I should have got a newer motor put in :cry:

Fo shizzle!!

Don't worry - your stock 2010 BMW motor will still have more power than my modded thing ;)

[Ruckos87]

• Undercut gearbox, and WSBK slipper clutch


So how does this set up compare to an actual auto blip ??
I've never had a slipper clutch properly explained to me ??


Sent from my iPhone using Tapatalk

[Marshy]

So how does this set up compare to an actual auto blip ??
I've never had a slipper clutch properly explained to me ??


Sent from my iPhone using Tapatalk

Unfortunately they are two different things :(

A slipper clutch is designed to slip on the downshifts (ie turning backwards), to prevent 'compression lockup' (as it used to be known) of the back wheel. So the clutch slips as you let the clutch out (or dump it) on a downshift, instead of immediately locking up. If you 'blip' on the downchanges, you don't really use the slipper function. I've never been able to blip, so it's useful for me!

[Ruckos87]

Unfortunately they are two different things :(

A slipper clutch is designed to slip on the downshifts (ie turning backwards), to prevent 'compression lockup' (as it used to be known) of the back wheel. So the clutch slips as you let the clutch out (or dump it) on a downshift, instead of immediately locking up. If you 'blip' on the downchanges, you don't really use the slipper function. I've never been able to blip, so it's useful for me!

Ahhh ok.
the corse Ecu has reduced engine breaking already,, so locking up should be harder

You might need to fit one...[emoji6]


Sent from my iPhone using Tapatalk

[Marshy]

It's got one!!! :D


Sent from my iPhone using Tapatalk

[Ruckos87]

It's got one!!! :D


Sent from my iPhone using Tapatalk

Not the ecu. The blipper, or have I missed it?


Sent from my iPhone using Tapatalk

[Marshy]

Not the ecu. The blipper, or have I missed it?


Sent from my iPhone using Tapatalk

Sorry, I thought you meant the ecu. Once you find us a suitable blipper, I'll buy one ;) :thumb:

[Carl-52]

Dlc (Diamond like Coating) is a material chemically bonded to the surface of the piece you are working that fills imperfections and cracks and makes a "perfect" surface with reduced friction, means it makes stuff slippy, less friction = less heat= less power loss= less wear on parts. superfinishing is the process of machining and post machine work to a near perfect surface without chemical adjusment. This helps to reduce crack propagation, etc and does teh same kinda things as dlc, less friction = less heat= less power loss= less wear on parts. But this also helps gear meshing and oil drag etc. Both very expensive processes to get done. The other one is cryogenic processing the components. < that one makes dlc and superfinishing look cheap.

[Marshy]

Dlc (Diamond like Coating) is a material chemically bonded to the surface of the piece you are working that fills imperfections and cracks and makes a "perfect" surface with reduced friction, means it makes stuff slippy, less friction = less heat= less power loss= less wear on parts. superfinishing is the process of machining and post machine work to a near perfect surface without chemical adjusment. This helps to reduce crack propagation, etc and does teh same kinda things as dlc, less friction = less heat= less power loss= less wear on parts. But this also helps gear meshing and oil drag etc. Both very expensive processes to get done. The other one is cryogenic processing the components. < that one makes dlc and superfinishing look cheap.

Thank you kind sir! Awesome info :thumb: :cool:

[Kris]

Aprilia use DLC on the intake buckets on the previous gen engines and on the intake, exhaust buckets on the new engine as well as the gearbox in certain spots.

If you buy the Aprilia Racing SBK 1 ring pistons, you get it on the pistons too - the ENTIRE piston!

The CRT/MotoGP engine uses it on the camshafts and alot of the rotating engine parts inside to reduce friction :)

1758

Here is a very rare photo inside a non gear drive CRT engine, billet aluminium cylinder heads and as you can see - DLC Coated fancy Camshafts

1759

[Marshy]

Whoa!! They are beeeeaaautiful!!! Is that what mine look like?? (I know they don't but just hoping....)

[Kris]

Unforunately not, Robby Moto dont use DLC on their pistons and the Superstock Aprilia ones also dont use DLC - to keep the costs undercontrol.

[Kimbo]

Wolfie 57 , Don't invite Marshy down for the BEARS in August. He doesnt play well with others, Ha,Ha

[Marshy]

Intimidated by my awesomeness, Kimbo? ;)

[Kimbo]

:flypig:Yep, certainly is Marshy

[zoidberg]

Dlc (Diamond like Coating) is a material chemically bonded to the surface of the piece you are working that fills imperfections and cracks and makes a "perfect" surface with reduced friction, means it makes stuff slippy, less friction = less heat= less power loss= less wear on parts. superfinishing is the process of machining and post machine work to a near perfect surface without chemical adjusment. This helps to reduce crack propagation, etc and does teh same kinda things as dlc, less friction = less heat= less power loss= less wear on parts. But this also helps gear meshing and oil drag etc. Both very expensive processes to get done. The other one is cryogenic processing the components. < that one makes dlc and superfinishing look cheap.

Cryogenic freezer in the new shed Marshy? Why/how is the cryogenic procedure better than the others Carl? Awesome info, cheers.

[Kris]

cyrogenic is actually fairly cheap. Theres a very good guy near Emu Plains that does it, including crack testing, xraying etc.

Its designed to increase the hardness of a metal by changing the crystal structure of the metal itself. My gearbox in the RSV4 was cyro treated but now in the new RSV4 gearbox they DLC coat the gears and I suspect modified the dogs/metal/design to improve the durability as the old box has alot of issues.

[Marshy]

Much more work has happened to X, and I like it more and more! There were a lot of bits that needed re-doing, and general tidying. Flushed the coolant system, as it's clearly had tap water in it at some point. Not badly rusted, but just enough to want to be really careful with it.

It had Samco hoses everywhere except the main one, upper right, in this pic. But it came in the spares bag with the bike, so I took the opportunity to fit it up. It makes all the difference! ;)

http://tarmactalk.com/images/x-9.jpg



Got the tweak out of the front end, from the tumble at a standstill on the right-hand side. And replaced the slightly bent bar. Used my favourite MotionPro clip-on alignment tool to get everything just right.

http://tarmactalk.com/images/x-10.jpg



The battery that came with it is pretty new and a good one, but HEAVY! So instead of eating a bit less and losing some belly fat, I just bought a lightweight battery and had fried chicken for dinner. Winner! MCAS special el-crappo brand.

http://tarmactalk.com/images/x-11.jpg


I like the custom Bazzas bracket! No, I can't take credit - it came with the bike. The reg rec doesn't live there; that was just temporary to start the bike.

http://tarmactalk.com/images/x-12.jpg


Vitally important!! Changing to gold wheels from the black. This is worth 3 secs a lap, easy. I've lockwired them now too.

http://tarmactalk.com/images/x-13.jpg


Changed out the Accosato quarter-turn cap for one that will take the quick fill Tuff jug nozzle.

http://tarmactalk.com/images/x-14.jpg



Replaced the slightly bent shift knuckle, and fitted up an aftermarket shift support, which helps stop the shift shaft from bending.

http://tarmactalk.com/images/x-15.jpg


And this is for you, Wolfie! For the 29th :cheer:

http://tarmactalk.com/images/x-16.jpg

[Wolfie57]

Good work mate, its coming together nicely!

MotionPro clip-on alignment tool sounds interesting ill have to check that out...

My bike should be ready, we traced the issue to the quickshifter so having to replace it, my clumsy foot had half killed it!

Bring it on!!!

[Turbo]

This is looking seriously trick!! :cool:
How weird he left off the last hose?! Is it ok? No wee holes or anything...?

[Marshy]

This is looking seriously trick!! :cool:
How weird he left off the last hose?! Is it ok? No wee holes or anything...?

Good question. It had been fitted to something before, so I'm suspicious! It seems to not be 100% round on the bend, but it doesn't look like it's going to restrict flow. And it didn't leak when I ran it up to run the flush through, so here's hoping :)


Sent from my iPhone using Tapatalk

[Marshy]

My bike should be ready, we traced the issue to the quickshifter so having to replace it, my clumsy foot had half killed it!

They do fail from time to time - I get calls from BMW owners about replacing the quickshifter. Glad it's sorted!!


Sent from my iPhone using Tapatalk

[Marshy]

MotionPro clip-on alignment tool sounds interesting ill have to check that out...

Found it (finally): http://tarmactalk.com/forum/showthread.php?1368-ASBK-prep&p=26032&viewfull=1#post26032

[Ruckos87]

Vitally important!! Changing to gold wheels from the black. This is worth 3 secs a lap, easy. I've lockwired them now too.

http://tarmactalk.com/images/x-13.jpg


[/IMG]

Contrary to popular belief, I heard a black wheels are three seconds faster than gold[emoji6]


Looking good!!!!


Sent from my iPhone using Tapatalk

[Marshy]

http://www.quotesvalley.com/images/44/beauty-is-in-the-eye-of-the-beer-holder8.jpg

To each their own ;)

[Marshy]

Stickers!! Stickers!! And more stickers!!

http://tarmactalk.com/images/x-17.jpg

http://tarmactalk.com/images/x-18.jpg

http://tarmactalk.com/images/x-19.jpg

http://tarmactalk.com/images/x-20.jpg

[Marshy]

How weird he left off the last hose?! Is it ok?

I figured this small mystery out. This bike had a motor swap, and the sole black hose is the only hose that is motor-to-motor, so the black hose just came with the new motor. All the other hoses were still attached to the bike at one end, so were left in place when the old motor was dropped out, and hooked back up to the new motor.

[Turbo]

I figured this small mystery out. This bike had a motor swap, and the sole black hose is the only hose that is motor-to-motor, so the black hose just came with the new motor. All the other hoses were still attached to the bike at one end, so were left in place when the old motor was dropped out, and hooked back up to the new motor.

Ahaaaa!! Ok, that makes sense!!

Bike is looking badass mate! You'd probably save some weight getting rid of those headlights tho... :lol:

[jaswib]

Stickers!! Stickers!! And more stickers!!

http://tarmactalk.com/images/x-17.jpg

http://tarmactalk.com/images/x-18.jpg

http://tarmactalk.com/images/x-19.jpg

http://tarmactalk.com/images/x-20.jpg
By chance did you make any extra stickers for poor old jason ☺☺

Sent from my SM-G920I using Tapatalk

[Ruckos87]

Me too. Please


Sent from my iPhone using Tapatalk

[Marshy]

You'd probably save some weight getting rid of those headlights tho... :lol:

Bahahahahahahaahahaaa!!


By chance did you make any extra stickers for poor old jason ☺☺

I did, actually. I made a bunch of extra SuperbikeSource.com.au stickers, in slightly different sizes and configurations. I thought about your Wibbo request, but you've got Jas ones on there now, right? What else did you need?


Me too. Please

As above ;) Special requests?

[jaswib]

Bahahahahahahaahahaaa!!



I did, actually. I made a bunch of extra SuperbikeSource.com.au stickers, in slightly different sizes and configurations. I thought about your Wibbo request, but you've got Jas ones on there now, right? What else did you need?



As above ;) Special requests?
Omg this is actually happening im slightly excited. Yep somehow i picked up the nickname Jaz amongst the 600 guys and it seems to have stuck lol. So pehaps a couple of those. Im actually popping out to the track to say hi and drop my engine off to Mick Jeffries tomorrow arvo so ill see you then also i remembered the way you looked at my allen keys so i have a present also.http://uploads.tapatalk-cdn.com/20160628/4c579ca777620f0aaaf1022f8a101ec6.jpg

Sent from my SM-G920I using Tapatalk

[Ruckos87]

As above ;) Special requests?

I was just after the Superbikesource ones for the frame buuuuuut
If all the cool kids have em I'll grab two for the screen in "ruckos"



Sent from my iPhone using Tapatalk

[zoidberg]

I thought I was a cool kid? I have no screen stickers...

Sent from my SM-G930F using Tapatalk

[Marshy]

And so it begins..... ;)

Leave it with me. No guarantees, as I had already packed the cutter away, but I'll see what I can do. They also take fricken ages to do. The race numbers and a couple of stickers on X took me three hours, and I already had the files ready to cut! Doing them from scratch is much longer.

[jaswib]

And so it begins..... ;)

Leave it with me. No guarantees, as I had already packed the cutter away, but I'll see what I can do. They also take fricken ages to do. The race numbers and a couple of stickers on X took me three hours, and I already had the files ready to cut! Doing them from scratch is much longer.
Hahah i dont mind i just want some new superbikesource stickers mine are all worn out now.

Sent from my SM-G920I using Tapatalk

[zoidberg]

I don't care what everyone else that wants their name stickers has been saying about you, (everyone but me, I've always had your back), I reckon your a top bloke Marshy.

[zoidberg]

Hahah i dont mind i just want some new superbikesource stickers mine are all worn out now.

Sent from my SM-G920I using Tapatalk

Superb ice isn't even a website Jase. I tried searching for it, but my fingers typed big sweaty knockers in the search bar again. Wait, where were we?

Bike looks unreal Nick. Bloody unreal.

[Ruckos87]

sweaty

All class once again Nate, all class....[emoji6]

Same here Nick don't go to any trouble on my account. I just want ride tomorrow ....


Sent from my iPhone using Tapatalk

[Marshy]

I got a second lie detector bracket and power plug, which I wired in too. Ready to rock!

http://tarmactalk.com/images/x-21.jpg

http://tarmactalk.com/images/x-22.jpg

[Simmo]

So many bikes. So few sessions! Better join me Thursday as well...?


Sent from my iPhone using Tapatalk

[Marshy]

So many bikes. So few sessions! Better join me Thursday as well...?


Sent from my iPhone using Tapatalk

I wish. Mind my kid, anyone?

[Marshy]

Finally finished and ready for tomorrow!!

http://tarmactalk.com/images/x-23.jpg




And jeez I'm good to you guys.....

http://tarmactalk.com/images/x-24.jpg

[Simmo]

So much goodness.
Much updates required to help me through my workday tomorrow!!


Sent from my iPhone using Tapatalk

[zoidberg]

Finally finished and ready for tomorrow!!

http://tarmactalk.com/images/x-23.jpg






And jeez I'm good to you guys.....

http://tarmactalk.com/images/x-24.jpg

The supreme leader is indeed kind beyond words to his unworthy subjects... You legend Nick! I was only kidding, but I'll take em! Thanks!

Have a blast out there today guys, so super jealous... SO many fun new bikes to be ridden!

[Marshy]

There are a bunch of colour combinations to choose from. And those yellow stripes on the right are my first attempt at TT stickers (the black writing bit is on the cutter in the photo, not yet prepped). We will see how they look!

[Ruckos87]

There are a bunch of colour combinations to choose from. And those yellow stripes on the right are my first attempt at TT stickers (the black writing bit is on the cutter in the photo, not yet prepped). We will see how they look!

Legend . Mine look super cool just need to finds some ware that's not black for the TT ones
http://uploads.tapatalk-cdn.com/20160629/eafad7b789b9a4d80628f4257f26ee98.jpg
http://uploads.tapatalk-cdn.com/20160629/1c46dc6390140f8468d980700ddbf4ba.jpg
Cheers again for your assistance today.[emoji1303]


Sent from my iPhone using Tapatalk

[jaswib]

Great to catch up with everyone today. Marshy and Owen both of your bikes look amazing was sad to come home and look at mine lol. Cheers for the stickers Marshy. 👍👍

Sent from my SM-G920I using Tapatalk

[Carl-52]

I had and exam... it cant be that bad Jas hahahahaa

[Marshy]

You're welcome fellas.

So.... this bike.

Oh. My. GOD!!! What a weapon! It's the best handling bike I've ever ridden. Those modded 30mm NIX carts are awesome! And the rear was really good too. Amazing lean angle.

The motor is a goodun too. It is torquey and punchy off turns, but still spins up really really quickly and has a lot of top end. It's about the same as The Fifteen in horsepower terms, but makes it a little bit differently. If I can get the Fifteen to hook up and drive off turns, they won't be far apart in feel and performance.

In short, it is everything I was hoping it would be, and a little better than I was expecting. I'm in love ;)

[jaswib]

I had and exam... it cant be that bad Jas hahahahaa
http://uploads.tapatalk-cdn.com/20160629/e87a388175700764f9ab5e4a3d0775af.jpg

mmm i dunno this is the current state of things.

Sent from my SM-G920I using Tapatalk

[Marshy]

:laugh:

[zoidberg]

You're welcome fellas.

So.... this bike.

Oh. My. GOD!!! What a weapon! It's the best handling bike I've ever ridden. Those modded 30mm NIX carts are awesome! And the rear was really good too. Amazing lean angle.

The motor is a goodun too. It is torquey and punchy off turns, but still spins up really really quickly and has a lot of top end. It's about the same as The Fifteen in horsepower terms, but makes it a little bit differently. If I can get the Fifteen to hook up and drive off turns, they won't be far apart in feel and performance.

In short, it is everything I was hoping it would be, and a little better than I was expecting. I'm in love ;)

More work required on the '15 to get it back to what you want then? Can I have one of them? You know, for free, just for being an all round top bloke? Just asking. Long story short, you still aren't enjoying the '15 eh?

[chubb]

You're welcome fellas.

So.... this bike.

Oh. My. GOD!!! What a weapon! It's the best handling bike I've ever ridden. Those modded 30mm NIX carts are awesome! And the rear was really good too. Amazing lean angle.

The motor is a goodun too. It is torquey and punchy off turns, but still spins up really really quickly and has a lot of top end. It's about the same as The Fifteen in horsepower terms, but makes it a little bit differently. If I can get the Fifteen to hook up and drive off turns, they won't be far apart in feel and performance.

In short, it is everything I was hoping it would be, and a little better than I was expecting. I'm in love ;)

What did you get down to???? If you don't mind me asking?


Sent from my iPhone using Tapatalk

[Marshy]

What did you get down to???? If you don't mind me asking?


Sent from my iPhone using Tapatalk

Not setting the world on fire on its first day. And it was cold and slippery today, so no lap records. But it was good just feeling comfortable!


Sent from my iPhone using Tapatalk

[chubb]

Not setting the world on fire on its first day. And it was cold and slippery today, so no lap records. But it was good just feeling comfortable!


Sent from my iPhone using Tapatalk

Cool!! Can't wait to see what the new bike can do!


Sent from my iPhone using Tapatalk

[WRCPUG]

So handling wise better than all your other apes?
Daz must of worked his magic on that thing like he does everything. Did you end up speaking to him to see what he has done to the suspension?

[stevem]

The track temp got up to 28 yesterday but even so the grip levels were down maybe due to the rain we have had and the track not being rubbered in. Like Nick said it definitely wasn't offering any lap records.

[Turbo]

Marshy and Owen both of your bikes look amazing was sad to come home and look at mine lol.


Thanks Jaz!!Was great to see you too. Your bike will be a blur of power before too long anyway!! :thumb:

[Metal-Man]

Nick !!


Where did you get that vinyl plotter from??

[Marshy]

Nick !!


Where did you get that vinyl plotter from??

Dunno. Online somewhere 4 or 5 years ago. It was really exxy. Looks cheap, but wasn't. Best part of a grand, IIRC.

[Marshy]

So handling wise better than all your other apes?
Daz must of worked his magic on that thing like he does everything. Did you end up speaking to him to see what he has done to the suspension?

Didn't speak to him, but I can (mostly) see what he's done. The conversion of 30mm NIX to a conventional cartridge is becoming more common. There's a kit you can get for it now. I'm gonna get my other ones done!

It needs slightly heavier springs in the front for the Creek. And the comp stack miiight be a touch too light too, but I'm gonna just try a .5 increase in spring rate first. They would be perfect for PI as is, which is of course what they were set up for. :thumb:

[Metal-Man]

Dunno. Online somewhere 4 or 5 years ago. It was really exxy. Looks cheap, but wasn't. Best part of a grand, IIRC.

woah!

I'd like something simple so i can produce my own decals ;-)

[Marshy]

There are ebay specials galore. Cheep cheep.

[jaswib]

woah!

I'd like something simple so i can produce my own decals ;-)
Why would one need that when you can just ask Marshy for 6 months then when you think he forgets he makes it rain cool stickers for ya ☺☺

Sent from my SM-G920I using Tapatalk

[Marshy]

Why would one need that when you can just ask Marshy for 6 months then when you think he forgets he makes it rain cool stickers for ya ☺☺

https://i.imgflip.com/p6bdv.jpg

[Metal-Man]

Why would one need that when you can just ask Marshy for 6 months then when you think he forgets he makes it rain cool stickers for ya ☺☺

Sent from my SM-G920I using Tapatalk

:pound:

[Ruckos87]

http://uploads.tapatalk-cdn.com/20160701/4c5d095c1b9abc9853042f38b3386951.jpghttp://uploads.tapatalk-cdn.com/20160701/5828791417d63d890d355b6817403223.jpg
Only non black area I had. Looks pretty good!!!


Sent from my iPhone using Tapatalk

[Turbo]

http://uploads.tapatalk-cdn.com/20160701/4c5d095c1b9abc9853042f38b3386951.jpghttp://uploads.tapatalk-cdn.com/20160701/5828791417d63d890d355b6817403223.jpg


Only non black area I had. Looks pretty good!!!


Sent from my iPhone using Tapatalk

Looks great, Luke!! :cool: