Soooooo....... This just happened

[Ruckos87]

http://uploads.tapatalk-cdn.com/20160303/503913fabdbd35cbc4aa75b355a23e7f.jpg

Very minimal damages but the cost to repair was massive so was written off.
It was mates bike, I know it well, still under warranty too.

should be fun[emoji33][emoji33][emoji33]

http://uploads.tapatalk-cdn.com/20160303/14dfc5012df31f962e388f3697317cb4.jpg
http://uploads.tapatalk-cdn.com/20160303/f45b36b8906f751d41a5a874e60328fd.jpg
http://uploads.tapatalk-cdn.com/20160303/0a3cdf914c1816038d9db81fa76f2294.jpg
http://uploads.tapatalk-cdn.com/20160303/34a0f0d2ff008e2719c30081c713cbb2.jpg


Sent from my iPhone using Tapatalk

[Linden]

Excellent
1675

[Leezx10r]

Love it! I think this could be the first new R1 build.
Wait till Owen see it hehe


Sent from my iPhone using Tapatalk

[zoidberg]

OH MY GOD. Can't wait to see this build! You're going to break Owen's heart.

[Ruckos87]

Not 100% sure what's the build will entail. I'll hit nick up for some race glass. Each own fairing on these things is about 4k hence the 26k repair bill. Hopefully flog off some and re coup some $$$.
I'll Prob do rear sets and need to chase up some wet rims, Then I've got about 3days of reading all about it. It's crazy what its supposed to be able to do.

I hope I like it. Haven't ever ridden an R1 as of yet..... Lol


Sent from my iPhone using Tapatalk

[zoidberg]

Look, it'll basically be identical to my 2004, i'll let you swap mine, it's already set-up. I'm good like that.

[Ruckos87]

Look, it'll basically be identical to my 2004, i'll let you swap mine, it's already set-up. I'm good like that.

[emoji848][emoji848][emoji848][emoji848]


Sent from my iPhone using Tapatalk

[jaswib]

Sooooo jealous that will be a weapon.

Sent from my SM-G920I using Tapatalk

[Helmet]

Nice!!!

[Marshy]

Look, it'll basically be identical to my 2004, i'll let you swap mine, it's already set-up. I'm good like that.

What a guy! ;)

Cannot wait to see this build!! I'm jelly - I want to ride one! Bum a ride when it's ready?

[Ruckos87]

What a guy! ;)

Cannot wait to see this build!! I'm jelly - I want to ride one! Bum a ride when it's ready?

Shearings caring I'll go u session for session if u critique my riding.



Sent from my iPhone using Tapatalk

[Marshy]

Shearings caring I'll go u session for session if u critique my riding.



Sent from my iPhone using Tapatalk

Deal!! :D

[Marshy]

You can ride the '15 Aprilia too :thumb: It's pretty special

[Ruckos87]

You can ride the '15 Aprilia too :thumb: It's pretty special

I'm still learning my ape, and the CBR to be truthful.

Hmmmm garage sale soon I think

Are there R1M specific fairings available ??


Sent from my iPhone using Tapatalk

[Ruckos87]

Sicko your welcome a session as well mate [emoji1303]


Sent from my iPhone using Tapatalk

[Marshy]

Are there R1M specific fairings available ??


2015/16 R1 the standard and the M are the same. We have them. I haven't listed them on our website yet, but we have them. Any paint design you like, as usual :thumb:

[Ruckos87]

2015/16 R1 the standard and the M are the same. We have them. I haven't listed them on our website yet, but we have them. Any paint design you like, as usual :thumb:

Cool we'll need to ensure it still looks like the m
[emoji41][emoji41]

I'll start looking at designs


Sent from my iPhone using Tapatalk

[chubb]

Nice pick up

[Turbo]

OMG OMG!! Nice pickup, Luke!! You're gonna LOVE it!!
Keep us posted as the build progresses. Very keen to hear what changes you make. There is so much already on it :thumb:
Are you thinking of keeping the electronic suspension?

[Ruckos87]

OMG OMG!! Nice pickup, Luke!! You're gonna LOVE it!!
Keep us posted as the build progresses. Very keen to hear what changes you make. There is so much already on it :thumb:
Are you thinking of keeping the electronic suspension?

Yep at this point it'll just get race glass and rear sets. Like I said not even 100% what's it got. Just couldn't pass it up


Sent from my iPhone using Tapatalk

[Turbo]

Yep at this point it'll just get race glass and rear sets. Like I said not even 100% what's it got. Just couldn't pass it up


There's plenty to play with out of the box! I wasn't a massive fan of the stock brakes but a wee chat with Michael Blair and he tells me the first thing they did was rip out the ABS and it now works a treat.
The electronics are HEAPS of fun to play with. Start with them fully dialled in and grab a handfull anywhere!!
You'll probably find it feels and handles smallish like the Aprilia does but with electronics dialled all but out, it's a flippin missile!!
Do you know if it's had the re-call done?

[Ruckos87]

Ahhh ...
Yep recall done.

I hoping it feel small like the ape, was just starting to get used to that


Sent from my iPhone using Tapatalk

[Ben750au]

Weapon Luke ! Can't wait to see and hear it !

[Turbo]

I hoping it feel small like the ape, was just starting to get used to that


Yes, or a ridiculously powerful R6!! :lol:

[Ruckos87]

Just Picked it up. Wow!!! It sounds awesome and the damage is less than I thought.

Looking closer at the damage as far as I can see is.
Right frame slider broken, I'll replace
Scratches to-
right side fairings.
right front break caliper,
front wheel,
engine case saver,
exhaust carbon cover,
And Rear hugger.
None of which I'll replace apart from the case savers and glass.

Just noticed there's no nelly pan on the OEM fairings.... And the read sets have no adjustability, pretty poor for a 30k+ bike

Oh and it'll take me a hr to clean off the statutory right off stickers crap...


Sent from my iPhone using Tapatalk

[Binksy]

Wicked pick up, can't put the jealously into words!!! :P

Roadbikes never have belly pans. They just fill up with gravel and crap much better to be open imo.

[Negrogrande]

Just Picked it up. Wow!!! It sounds awesome and the damage is less than I thought.

Just noticed there's no nelly pan on the OEM fairings.... And the read sets have no adjustability, pretty poor for a 30k+ bike

Oh and it'll take me a hr to clean off the statutory right off stickers crap...


Sent from my iPhone using Tapatalk

No belly pans on any road bike (rain)

Hair dryer and prepsol are your friends

[Ruckos87]

No belly pans on any road bike (rain)

Hair dryer and prepsol are your friends

Ahh lol Haven't been on a road bike in a while...


Sent from my iPhone using Tapatalk

[Mr.Ed]

Hair dryer and prepsol are your friends

Or even a good soak in Mr.Sheen as stupid scrutineering stickers have taught me

[zoidberg]

Seems like A LOT of effort. The offer is still there to swap with my well set up 04 R1.

[Ruckos87]

Seems like A LOT of effort. The offer is still there to swap with my well set up 04 R1.

http://www.urbandictionary.com/define.php?term=insanity



Sent from my iPhone using Tapatalk

[Baddie]

http://uploads.tapatalk-cdn.com/20160303/503913fabdbd35cbc4aa75b355a23e7f.jpg

Very minimal damages but the cost to repair was massive so was written off.
It was mates bike, I know it well, still under warranty too.

should be fun[emoji33][emoji33][emoji33]

http://uploads.tapatalk-cdn.com/20160303/14dfc5012df31f962e388f3697317cb4.jpg
http://uploads.tapatalk-cdn.com/20160303/f45b36b8906f751d41a5a874e60328fd.jpg
http://uploads.tapatalk-cdn.com/20160303/0a3cdf914c1816038d9db81fa76f2294.jpg
http://uploads.tapatalk-cdn.com/20160303/34a0f0d2ff008e2719c30081c713cbb2.jpg


Sent from my iPhone using Tapatalk

That wouldn't happen to be the bike that has spent more time under water than above by chance?????.

[Ruckos87]

That wouldn't happen to be the bike that has spent more time under water than above by chance?????.

Nar. It was a mates bike, It's been looked after well.


Sent from my iPhone using Tapatalk

[Ruckos87]

Spent a fair bit of time reading this weekend, so much to take in I'll need to re read it again and again. Had a play with Yamaha's on line simulation pretty cool.
http://www.yamahamotorsports.com/sport/meter/yzf-r1_multi-function_meter_simulator/html/index_r1m.html

Installed the data logger in place of the pillion seat. The tires are shot so I'm getting a set of VO2. ( sorry Nick your Cheeper but I felt for the guy in the shop who's had the bike since before new year) who I pestered continually about the assessor and what he might do with it. so I ordered some off him.

I recon I'll run initially with the suspension set to A1 basically set to automatic adjustment for track riding with slicks, adjust a few times a second !!!!
Looking at the manual suspension settings wow!!! So simple to adjust and save different combinations.
The slide control will be interesting I'll dial that out so its only moderately effective, I'm not at the stage of backing it in where I'd need it off. Yet

Race glass design is next, and then I'll see about stripping off some of the road gear before I give it a crack at WP on the 15th.

Excited much !!!! Yes I am



Sent from my iPhone using Tapatalk

[Turbo]

This is going to be so much fun!!
Can't wait to hear how the trials progress :thumb:

[Ruckos87]

Do you know if it's had the re-call done?

Good call just double checked, no not the gear box. I'll get that done this week. [emoji1303]


Sent from my iPhone using Tapatalk

[Marshy]

Just out of interest, do they warranty a stat?

[Ruckos87]

Just out of interest, do they warranty a stat?

Yep apparently. But you've got me worried now....
Fairing Drawings to some shortly ready for your fine tuning [emoji41]


Sent from my iPhone using Tapatalk

[Marshy]

:thumb:

[Mr.Ed]

I don't know about Yamaha... but when Kawasaki had a recall for the ZX6R they took mine and in with race farings and all, no questions asked.

[Negrogrande]

I don't know about Yamaha... but when Kawasaki had a recall for the ZX6R they took mine and in with race farings and all, no questions asked.

Ditto with the M/C on my GSXR.

I just had to update the documentation with Suzuki Aus that I was the current owner and the fix hadn't been done yet. ( I gave the new M/C to Bombings, I had an RCS already)

[Ruckos87]

Spoke to Yamaha all Sorted, parts on order.


Sent from my iPhone using Tapatalk

[Jakels]

Is this the one that went thru the auctions for $14-15k a week or two ago?

There seem to be more and more of them at the track.

Very nice.

[Ruckos87]

Is this the one that went thru the auctions for $14-15k a week or two ago?

There seem to be more and more of them at the track.

Very nice.

Nar was a mates we by passed the auction, took the bike and a cash settlement.


Sent from my iPhone using Tapatalk

[Ruckos87]

Basically ready for a run now, just need some GN crash protection and fit new slicks.
Removed the mirrors, rear fender/ lights pillion pegs, frame sliders and the previous owners Rossi flu-row yellow stickers .
I'll need to tap a thread in the stock gear lever to switch it into GP shift but I'll do that tomorrow

Took it for a quick ride around the workshop drive way, just in 1st gear, position is nice feel small enough that I reccon it'll suit me.
I did notice that it seem to turn far easier than the Aprilia and CBR?? To a point where it felt strange at 1st. Not a bad thing at all, but is this common with the yamahas compared to others? I've not ridden a Yamaha before.

Oh and gave it a wash
http://uploads.tapatalk-cdn.com/20160308/b267f032541b025ddd2b7b0d2267bc37.jpg

yes that's the side that got dropped cleaned up nice.


Sent from my iPhone using Tapatalk

[Marshy]

Bloody beautiful!!!

[triumph]

looks good .

[Ruckos87]

So the bikes off getting the gear box recall down and I'm playing with the data logger, eventually worked out I need an iPad to run it so that's sorted. Looking at the data Yamaha supply from SMSP has got me thinking about gearing. From the data looks like the test rider was taking T2 in 1st, leading me to believe that the stock gearing as always needs a tweak.

Is anyone running a newer R1? What gearing are you running. I'll most likely order a 520 chain and the standard -1 +2 chuck that on and see how it goes. I'll leave it stock, till after WP.

Here's a few screen shots of the system when looking at a single lap
http://uploads.tapatalk-cdn.com/20160310/389aaec01821f7a9a9bf8175d2bdacb3.jpghttp://uploads.tapatalk-cdn.com/20160310/13e98bbda55bf4430d1812edae165848.jpg
It's also got the ability to over lap two at a time, seems pretty easy to use in the pits straight after a session
http://uploads.tapatalk-cdn.com/20160310/e1ef8a0ce030e27253c7a24ace6577d1.jpg
http://uploads.tapatalk-cdn.com/20160310/9bda68be70fc59eba8a1b34401575f60.jpg

Hers a clip of it in action pretty cool off just an iPad..

https://m.youtube.com/watch?v=etqGaoLeE4Y

Last post for a while I promise...


Sent from my iPad using Tapatalk

[Marshy]

Last post for a while I promise...


No! Keep posting! This is pure bike porn. I hope it lives up to the hype....

[Baddie]

Nick...time for another Brand change... ( Jap bike Rule )

Sent from my SM-N915G using Tapatalk

[Turbo]

This is soooo freaking cool!! Thanks for posting, Luke!!

[Leezx10r]

Great thread, keep the updates coming [emoji106]🏻


Sent from my iPhone using Tapatalk

[Ruckos87]

Had a tops day today at WP very laid back. The re surfacing was great. We booked into green (based on EC) and they merged it with novice.... So there was a bit of passing to do, but all good I need the practice.

Took me a session or to to get into the groove on the new bike. Ended up getting down to 108s not super fast but better than my previous 111/2s.
The bike performed fantastic. Smooth and heaps of power. Managed to get the GPS data working after a few initial set up issues. Reading deeper into it I was only really engaging the slide control exiting T2 and occasionally T10. And rear abs In a few places. Pretty sure it applies the rear when hard on the front.( but I'll look into that ) I could feel the lift control kicking in down the straight but it didnt show on the iPad.
Basically it looks like I need to go harder to get the electronics working... but all in time.

Ran a soft rear because of a f#%kup with tyres late on Monday. Apart from wearing very quick I loved it. If money was no option is run it all the time.

Chucked a cable tie on the front forth just to see the travel. With the settings on A1 (automatic track riding w-slicks) it looked like I was on the stoppers by the 2nd last session. Couldn't feel it on track though, it felt great. On the automatic setting you can adjust it in increments of +5 or -5 from the pre set. But again I'll need to read up that a bit more and see what the deal is.


All in all it was awesome, think I'll keep it... Lol


Sent from my iPhone using Tapatalk

[Marshy]

A rumour has it you rode it today. Enquiring minds was to know..... HOW THE HECK WAS IT?!?!?!?


Sent from my iPhone using Tapatalk

[Marshy]

Shiiit, beat me by seconds!!


Sent from my iPhone using Tapatalk

[Marshy]

Sounds unreal mate! Good update. Looking forward to seeing it at the Creek soon.


Sent from my iPhone using Tapatalk

[Ruckos87]

ARDC on the 1st. U can show me what it's capable of. [emoji4]


Sent from my iPhone using Tapatalk

[Marshy]

:cool: :cool: :thumb:


Sent from my iPhone using Tapatalk

[Mr.Ed]

We could use some onboard video, just sayin' ;)

[Ruckos87]

We could use some onboard video, just sayin' ;)

I'll upload the sessions I didn't forget to press record tomorrow.


Sent from my iPhone using Tapatalk

[Mr.Ed]

http://replygif.net/i/603.gif

[Metal-Man]

JOh and it'll take me a hr to clean off the statutory right off stickers crap

prepsol wax n grease remover) or metho is ur best friend here

[Turbo]

I'll upload the sessions I didn't forget to press record tomorrow.


Sent from my iPhone using Tapatalk

It's tomorrow!!!!!!!! :pop2:

[Ruckos87]

Inter net speed is shit here today it's loading ready to post.
80% 23 min ....


Sent from my iPhone using Tapatalk

[Ruckos87]

Here you go. I just realised how slow I actually am.[emoji20] I reccon +2 on the rear will be better suited. Should let me get into 3rd before T11 and possibly T3

That's my mate on the Orange GSXR. I didn't have the nuts to out break him this time but next time for sure


Be kind.... [emoji15] I was letting him pass in T8 (Cough cough...) lol

https://youtu.be/HRT1Kjf2cs0




Sent from my iPhone using Tapatalk

[Turbo]

OOOOFFT!! That thing sounds ace mate! How was the cross-country session?? :lol:
What did you use for overlay etc? Looks great.

[Ruckos87]

OOOOFFT!! That thing sounds ace mate! How was the cross-country session?? :lol:
What did you use for overlay etc? Looks great.

Yes was thinking about my mate behind me lol

I love the sound

That's just the Garmen virb camera. All the data is standard, just choose the options u want displayed


Sent from my iPhone using Tapatalk

[Turbo]

That's just the Garmen virb camera. All the data is standard, just choose the options u want displayed



Shit, really? So is it a GPS logger too??
Where did you pick it up from?

[Ruckos87]

eBay not this one exactly but same same
https://www.ebay.com.au/ulk/itm/381262275897



Sent from my iPhone using Tapatalk

[jaswib]

Shit, really? So is it a GPS logger too??
Where did you pick it up from?
Im going to hijack here and ask what you use for your Overlay and gopro editing the aim is somewhat confusing me i had a good play lastnight and managed to look at those features you told me about but would quiet like doing a pb lap vid with some overlay work.

Sent from my SM-G920I using Tapatalk

[Turbo]

Im going to hijack here and ask what you use for your Overlay and gopro editing the aim is somewhat confusing me i had a good play lastnight and managed to look at those features you told me about but would quiet like doing a pb lap vid with some overlay work.

Sent from my SM-G920I using Tapatalk

Race Render is supposed to be pretty good, I think Lawson uses it. http://racerender.com/Products/index.html
I don't often do data overlay to be honest. My bro wrote a program that converts AIM channels data to a chroma key video you can overlay.
I think he was going to make it web based at some stage but I'm not sure if that's happened yet.

He did make a .csv to .kml converter that will convert single laps, exported from Race Studio, to Google Earth plots.
You can rename as well as change colour and line width before downloading the file.
http://caffetine.org/csv2kml/

[jaswib]

Race Render is supposed to be pretty good, I think Lawson uses it. http://racerender.com/Products/index.html
I don't often do data overlay to be honest. My bro wrote a program that converts AIM channels data to a chroma key video you can overlay.
I think he was going to make it web based at some stage but I'm not sure if that's happened yet.

He did make a .csv to .kml converter that will convert single laps, exported from Race Studio, to Google Earth plots.
You can rename as well as change colour and line width before downloading the file.
http://caffetine.org/csv2kml/
Awesome mate that last bit interests me i managed to export a session to google maps but was stuck with the whole session on there and all the laps were the same colour so i couldnt really take anything away from it.

Sent from my SM-G920I using Tapatalk

[Marshy]

Using the map view in the Aim software, I hardly see the need for a Google maps overlay. You can view multiple laps in different colours on a circuit map, which gives you pretty much all the info you need, imho.


Sent from my iPhone using Tapatalk

[jaswib]

Using the map view in the Aim software, I hardly see the need for a Google maps overlay. You can view multiple laps in different colours on a circuit map, which gives you pretty much all the info you need, imho.


Sent from my iPhone using Tapatalk
Hahaha sounds like i have to spend more time playing with the software so many numbers and options i didn't know where to begin.

Sent from my SM-G920I using Tapatalk

[Mr.Ed]

I would probably crash just from watching that dash... that thing is a beauty! hahaha

[Turbo]

Using the map view in the Aim software, I hardly see the need for a Google maps overlay. You can view multiple laps in different colours on a circuit map, which gives you pretty much all the info you need, imho.


Sent from my iPhone using Tapatalk

That's only one lap in relation to another. Can't really see apexes like you can with Google Earth:
http://i.imgur.com/litt3Fol.png

[Marshy]

That's only one lap in relation to another. Can't really see apexes like you can with Google Earth:
http://i.imgur.com/litt3Fol.png

Yah, good point! I've never tried it.


Sent from my iPhone using Tapatalk

[Turbo]

Yah, good point! I've never tried it.


Sent from my iPhone using Tapatalk

http://i.imgur.com/uUsWEfJh.jpg

[Ruckos87]

Well having internet access while sitting with the kids watching pixels and hearing the Aussie dollar is above 0.70 is dangerous...

Just order the autoblip clutchless down shift kit, from flash tune.[emoji33]
Will require a re flash but all good.
Shame I can't find any rims just yet.
Need to get this CBR sold now....


Sent from my iPhone using Tapatalk

[Marshy]

Watching the video, it still amazes me they released it without auto-blip. It's such a relatively simple addition, and I gotta say that it's exactly like a quickshifter was in the beginning: once you've used a bike with auto-blip, you just can't go back!

[KANGA]

Watching the video, it still amazes me they released it without auto-blip. It's such a relatively simple addition, and I gotta say that it's exactly like a quickshifter was in the beginning: once you've used a bike with auto-blip, you just can't go back!

Do the Aprilias have them? I dream of one day having an auto blipper! I can't blip the throttle while braking to save my life. Always end up modulating lever pressure as I try start and pogoing back and forth.

[Marshy]

Do the Aprilias have them? I dream of one day having an auto blipper! I can't blip the throttle while braking to save my life. Always end up modulating lever pressure as I try start and pogoing back and forth.

Nope, not standard, but my special one with the kit electronics does. Bloody awesome!! I got used to it on the '15 Beemer, and then got lucky with the Ape already having it fitted. You can buy a Starlane one for the Ape, too.

I've never been able to blip! Years ago I just stopped trying (same issue... if I blip I let go of the brake - I must be really unco!), and just put up with it being clunky. Then slipper clutches came out, and it got a bit better. Now, not using the clutch at all is awesome!! When I jump on the wet bike (without auto-blip), I get all confused and can't change down.

[Ruckos87]

Yep that's my issue struggling to blip, and break at the same time mostly into T2 at EC but if the option is there why not, one less thing to worry about.



Sent from my iPhone using Tapatalk

[Kris]

Nope, not standard, but my special one with the kit electronics does. Bloody awesome!! I got used to it on the '15 Beemer, and then got lucky with the Ape already having it fitted. You can buy a Starlane one for the Ape, too.

I've never been able to blip! Years ago I just stopped trying (same issue... if I blip I let go of the brake - I must be really unco!), and just put up with it being clunky. Then slipper clutches came out, and it got a bit better. Now, not using the clutch at all is awesome!! When I jump on the wet bike (without auto-blip), I get all confused and can't change down.

Nick how are you getting auto blip without the shift rod sensor ???

[Marshy]

Nick how are you getting auto blip without the shift rod sensor ???

It's got the sensor, I assume. The one on the old APX bike has a custom-looking sensor (which doesn't auto-blip), but the RF has a sensor that looks identical to the stock black one, but works both ways.


Sent from my iPhone using Tapatalk

[Kris]

Na, that sensor doesnt auto blip, the only one Aprilia sell is a small red one, it has Aviorace written on it. They supply all the APX pot sensors. Theres also a modified gearbox sensor with different wiring that goes into the engine.

The easy way to tell if you have some kinda special setup, is open the Palm, go into GEAR and check if its SET, ONLYPOT or LOAD

[Marshy]

So how is it auto blipping??


Sent from my iPhone using Tapatalk

[Kris]

Ive no idea :) but you can absolutely use the OEM sensor without the clutch to go up gears, it will move the revs slightly but thats not the blip. Have a look at your Palm and see whats in there - maybe you have some kinda wackky thing that auto blips :)

[Marshy]

Maybe I'm just speshul :laugh:


Sent from my iPhone using Tapatalk

[Kris]

Check whats in your palm, that will tell you for good but my discussions with the wogs say only the little red sensor does it combined with the 360degree gearbox pot.

Youll also know visually because your black box would connect into a Deutsch Autosport connector near the water pump (and not the 2 pin connector up near the airbox)

[Marshy]

What setting is it under? Ie what am I looking for in the palm?


Sent from my iPhone using Tapatalk

[Jakels]

So how is it auto blipping??


Sent from my iPhone using Tapatalk

https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcTq3JG4ub4Tb51eiNcjRb02QrF6gM4go _OMBcMhb4A7YdGesQxxl6RQAhBY-Q

[Marshy]

https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcTq3JG4ub4Tb51eiNcjRb02QrF6gM4go _OMBcMhb4A7YdGesQxxl6RQAhBY-Q

:pound: :pound: :pound:

[jaswib]

Race Render is supposed to be pretty good, I think Lawson uses it. http://racerender.com/Products/index.html
I don't often do data overlay to be honest. My bro wrote a program that converts AIM channels data to a chroma key video you can overlay.
I think he was going to make it web based at some stage but I'm not sure if that's happened yet.

He did make a .csv to .kml converter that will convert single laps, exported from Race Studio, to Google Earth plots.
You can rename as well as change colour and line width before downloading the file.
http://caffetine.org/csv2kml/
This bastard is amazing overlayed my 41 flat and 40 and boom see where the time is plus made some custom back grounds. http://uploads.tapatalk-cdn.com/20160317/0c86bb81991856b343906b99219999b8.jpghttp://uploads.tapatalk-cdn.com/20160317/dd27c2c6ff7d8ad33719db1f093b1ff3.jpghttp://uploads.tapatalk-cdn.com/20160317/1dd86c73c814c6fab0952985d7f22138.jpghttp://uploads.tapatalk-cdn.com/20160317/defa0d2aff0a27acca21811db8de6f03.jpghttp://uploads.tapatalk-cdn.com/20160317/4962570cb08548dae2737f264d30f214.jpg

Sent from my SM-G920I using Tapatalk

[Negrogrande]

Race Render is supposed to be pretty good, I think Lawson uses it. http://racerender.com/Products/index.html
I don't often do data overlay to be honest. My bro wrote a program that converts AIM channels data to a chroma key video you can overlay.
I think he was going to make it web based at some stage but I'm not sure if that's happened yet.

He did make a .csv to .kml converter that will convert single laps, exported from Race Studio, to Google Earth plots.
You can rename as well as change colour and line width before downloading the file.
http://caffetine.org/csv2kml/


yep I do https://www.youtube.com/watch?v=ko5juGSRFTk

or did rather when I used to ride bikes. it is pretty easy to use & you can sync up multiple camera's plus overlays etc.

as a pure video editing piece of software it is pretty handy as well. much faster than movie maker

[Ruckos87]

So unfortunately my new sprockets won't arrive until Friday, and I'm still waiting on the auto blip from the States, Hopefully it's fully sorted by the 27th as I've got a date with Alex Cudlin.

Picked up the bike today from Rob fitted up with a new rear spring and a few base line settings stored manually into the electronic suspension, ready for a run on Friday. It was the 1st time I'd played with it ( when I dropped it off) I was amassed how well it worked. We set up a full soft and a full hard preset, and it just worked!!! So quick and easy.

I've also finished fitting some bonamici rearsets, GB crash protection and started race prep.

I picked up one of Breezys handle bar controls, but I won't fit that up until I get the race glass and strip off the rest of the street kit.

Im spewing about the gearing it really needs it especially if they stick with the full circuit for Friday.

Cheers




Sent from my iPhone using Tapatalk

[Metal-Man]

This bastard is amazing overlayed my 41 flat and 40 and boom see where the time is plus made some custom back grounds. http://uploads.tapatalk-cdn.com/20160317/0c86bb81991856b343906b99219999b8.jpghttp://uploads.tapatalk-cdn.com/20160317/dd27c2c6ff7d8ad33719db1f093b1ff3.jpghttp://uploads.tapatalk-cdn.com/20160317/1dd86c73c814c6fab0952985d7f22138.jpghttp://uploads.tapatalk-cdn.com/20160317/defa0d2aff0a27acca21811db8de6f03.jpghttp://uploads.tapatalk-cdn.com/20160317/4962570cb08548dae2737f264d30f214.jpg

Sent from my SM-G920I using Tapatalk

I'd be interesting to see a ghost bike of you, on the yellow line, and anothr ghost bike of you on the red line, at same time, as an overlay, to see the difference in a video .. that'd be awesome I reckon

[Ruckos87]

Auto blip fitted, spare rims arrived ready to rock


Sent from my iPhone using Tapatalk

[Carl-52]

sweeeeeeet

[Ruckos87]

I've been teased by pics of new glass. Will look sweet.

But on another note I dropped a tooth on the front before ARDC. Still needs a bit more so I've got a 520 chain 43 rear. I'm just not sure if -1 +2 will be a bit much, so I've ordered a 42 rear as well.
Not going to go any gearing till after the next two rides days coming up, and I get a bit more comfortable on the bike.



Sent from my iPhone using Tapatalk

[Ruckos87]

Tested out the auto blip today. It's fantastic works like a dream. Absolutely love it.
Took another sec off my PB as well [emoji41]


Sent from my iPhone using Tapatalk

[Mr.Ed]

Almost not too jealous

[jaswib]

Tested out the auto blip today. It's fantastic works like a dream. Absolutely love it.
Took another sec off my PB as well [emoji41]


Sent from my iPhone using Tapatalk
So jealous here we are peasant like using clutches and the throttle to go down gears 😣😣

Sent from my SM-G920I using Tapatalk

[Ruckos87]

So jealous here we are peasant like using clutches and the throttle to go down gears [emoji21][emoji21]

Sent from my SM-G920I using Tapatalk

What's this clutch you speak of? Can't recall one [emoji6]

[Marshy]

What's this clutch you speak of? Can't recall one [emoji6]

Me neither ;)

[zoidberg]

It's the wobbly bit attached to the end of the sticky outty bit on the thingo. You know, the thing?

Sent from my SM-G930F using Tapatalk

[Marshy]

It's the wobbly bit attached to the end of the sticky outty bit on the thingo. You know, the thing?

Oh righhhhhht. The Launch Control initiation lever! I use it every race start. Don't touch it apart from that, so it wasn't front of mind.

[Ruckos87]

Oh righhhhhht. The Launch Control initiation lever! I use it every race start. Don't touch it apart from that, so it wasn't front of mind.

This .... [emoji23][emoji23][emoji23]

[Ruckos87]

Couldn't sleep this morning so up early and fitted off the race glass and got rid of the left hand control gear replaced with one of Breezes controls.

Couldn't be happier with it.

Still need to fit cilpons, motion pro throttle and finish lock-wiring but hey...

http://uploads.tapatalk-cdn.com/20160504/cedef8693596861c454722f41a589fa1.jpghttp://uploads.tapatalk-cdn.com/20160504/2f5b4607f5b9982e78eff601c5dd24fd.jpghttp://uploads.tapatalk-cdn.com/20160504/955796603b3d5f614eb3371c7f89e30d.jpghttp://uploads.tapatalk-cdn.com/20160504/6956f491dfbdfb251f11437cd7c0b981.jpghttp://uploads.tapatalk-cdn.com/20160504/1a36a393bb48289bac95ce875174b7e6.jpghttp://uploads.tapatalk-cdn.com/20160504/0d286ba3b32b0455c2d4bbe6e8d8d5d4.jpg


Sent from my iPhone using Tapatalk

[Turbo]

This is looking badass, Luke!! Great work!! :cool: :cool:

[Marshy]

Oh. My. GOD!!!

They look freaking awesome!! Jeez this Superbike Source mob make good-looking fairings..... ;)

[jaswib]

Ehhhh myyyyy goooood looks tops this is making me want to get nice fairings for my bike 😑😑

Sent from my SM-G920I using Tapatalk

[Ruckos87]

The Photos don't do it justice. I need a better camera [emoji41]


Sent from my iPhone using Tapatalk

[Leezx10r]

Very nice [emoji106]🏻 see you Friday


Sent from my iPhone using Tapatalk

[triumph]

that's a nice looking bike you got there .

[stevem]

Nice

[zoidberg]

The Photos don't do it justice. I need a better camera [emoji41]


Sent from my iPhone using Tapatalk
I appreciate the efforts you are going to Luke, but really, I'll still swap you for my 04 R1 even if you don't keep modding.

Sent from my SM-G930F using Tapatalk

[Marshy]

Jeez this Superbike Source mob make good-looking fairings..... ;)

Used to make good fairings, anyway. Just stopped. Too many unreasonable people. If any TT member really wants some, and promises to be different and not to sue me, let me know.

[Ruckos87]

Used to make good fairings, anyway. Just stopped. Too many unreasonable people. If any TT member really wants some, and promises to be different and not to sue me, let me know.

What..... ????

[Ruckos87]

I appreciate the efforts you are going to Luke, but really, I'll still swap you for my 04 R1 even if you don't keep modding.

Sent from my SM-G930F using Tapatalk

Let me finish it. Then it's yours if u throw in a case. [emoji23][emoji23][emoji23][emoji23]

[zoidberg]

Let me finish it. Then it's yours if u throw in a case. [emoji23][emoji23][emoji23][emoji23]

Only if you throw in your trailer too. Actually, I need to talk to you about the trailer on friday. Can't bloody wait to see your bike now mate, god it looks good!

[Ruckos87]

Hmmmm[emoji848]


Sent from my iPhone using Tapatalk

[chicken16]

What..... ????

Yeh, what he said! As you know, I just got mine and was really impressed.

[Metal-Man]

what are those black bendy tubey things on coming out of the top of ya bouncy bits??

[chubb]

Electronic controlled forks

[Ruckos87]

what are those black bendy tubey things on coming out of the top of ya bouncy bits??

Electronic suspension adjustment. It's a bit fancy

[Metal-Man]

just a tad

[Ruckos87]

In keeping with the original thread title Sooooooo this just happend.

As most of you know I had a spill at ARDC last Friday. Nicks giving me a hand with the repairs, and hiding the bike from my Mrs.[emoji7]She knows I had a low side, I just left out the T1 @220 part. If she saw the bike she would assume the worst.

Pic's of the bike (actually it looks worse than it is)
http://uploads.tapatalk-cdn.com/20160517/cb0e740fb5b11c7ead3e3b02c669e4c4.jpg
http://uploads.tapatalk-cdn.com/20160517/5ab86b60d0581b26fc3d976e6d6b2c92.jpg
http://uploads.tapatalk-cdn.com/20160517/1beed22fac0580524a4934609b5fb847.jpg
http://uploads.tapatalk-cdn.com/20160517/494f2501b12c867bd51a4fed6eb1ab00.jpg
http://uploads.tapatalk-cdn.com/20160517/dc11442ca49be84b94bdb63fe4b82e22.jpg
Shopping list includes
-rear sub frame
-front race stay with intake
- Clipons
- GB crash protection
- rear sets
- fairings
- misc bits n peices

The sub frame and stay arrived today from the UK and look the goods.
http://uploads.tapatalk-cdn.com/20160517/168c87799ae2983b6dcf1ef113746a94.jpg
I've got Clipons and a motion pro Quick action throttle that hadn't been installed yet, and spare rear sets in the kit.

The GPS data logger took a beating, but may still function. If not I won't be replacing it any time soon there about $2500 OEM.... It's a fun app to play with but not worth that amount of coin. Tank has a couple of dings but won't effect function, the bike had no obvious fluid leaks, and apart from the listed "looks" OK

Ahhh she was so pretty[emoji45][emoji45][emoji45]


Sent from my iPhone using Tapatalk

[Turbo]

In keeping with the original thread title Sooooooo this just happend.

As most of you know I had a spill at ARDC last Friday. Nicks giving me a hand with the repairs, and hiding the bike from my Mrs.[emoji7]She knows I had a low side, I just left out the T1 @220 part. If she saw the bike she would assume the worst.

Pic's of the bike (actually it looks worse than it is)





Shopping list includes
-rear sub frame
-front race stay with intake
- Clipons
- GB crash protection
- rear sets
- fairings
- misc bits n peices

The sub frame and stay arrived today from the UK and look the goods.

I've got Clipons and a motion pro Quick action throttle that hadn't been installed yet, and spare rear sets in the kit.

The GPS data logger took a beating, but may still function. If not I won't be replacing it any time soon there about $2500 OEM.... It's a fun app to play with but not worth that amount of coin. Tank has a couple of dings but won't effect function, the bike had no obvious fluid leaks, and apart from the listed "looks" OK

Ahhh she was so pretty[emoji45][emoji45][emoji45]


Sent from my iPhone using Tapatalk

Those new bits looks great! They're aftermarket right? :cool:

I reckon the GPS do-hicky will be fine. It just looks like the case is smashed, the PCB is totally intact.
A bit of chipping away at her and she'll be back in action. A cover over that tank too and it'll look the biz again. :thumb:

[Ruckos87]

Those new bits looks great! They're aftermarket right? :cool:

I reckon the GPS do-hicky will be fine. It just looks like the case is smashed, the PCB is totally intact.
A bit of chipping away at her and she'll be back in action. A cover over that tank too and it'll look the biz again. :thumb:

Yep CRC Carl put me onto them.

[Mr.Ed]

Are you getting the frame checked? With the way the subframe got ripped out I guess it wouldn't hurt... might as well check swing arm whilst you're at it.

Other than that, bring it back ASAP!!! ;)

[Marshy]

the subframe got ripped out

Snapped off, not ripped out. They are pretty lightweight and not very strong. My guess is it's fine, but we will stringline and laser it to be sure.

[Ruckos87]

As bad as it sounds I'm looking forward to getting stuck into the repairs. Will be another learning curve for me, and all part of the fun.
Wondering how the air box and filter stood up to it. It was moving pretty quick through the kitty litter.


Sent from my iPhone using Tapatalk

[triumph]

hiding it from the wife. now that's hard

[zoidberg]

As bad as it sounds I'm looking forward to getting stuck into the repairs. Will be another learning curve for me, and all part of the fun.
Wondering how the air box and filter stood up to it. It was moving pretty quick through the kitty litter.


Sent from my iPhone using Tapatalk
When I crashed at corporate hill a while ago, there was gravel all the way up my exhaust, to the headers... I never even gave it back! Hehe[emoji12]

Sent from my SM-G930F using Tapatalk

[Ruckos87]

When I crashed at corporate hill a while ago, there was gravel all the way up my exhaust, to the headers... I never even gave it back! Hehe[emoji12]

Sent from my SM-G930F using Tapatalk

If we all pool our stocks of gravel, I reccon we could sell it back. It's $110 a tone in this current market.

[Marshy]

I'm about 2sqm into covering the front garden of the house with Eastern Creek gravel. I reckon I'll finish the lot before I hang up the helmet for good. It's quite a nice stone.

[Turbo]

I'm about 2sqm into covering the front garden of the house with Eastern Creek gravel. I reckon I'll finish the lot before I hang up the helmet for good. It's quite a nice stone.

I think it should become the SSR Zen garden of performance contemplation.

[Marshy]

I think it should become the SSR Zen garden of performance contemplation.

Perfect!! Fantastic idea :cool:

[BR]

Loool you guys are funny :)

[Carl-52]

good work getting the parts, that subframe and fairing stay look the BIZ! :D pics of the gps unit? Can get cases from jaycar if you need to re box it.

[zoidberg]

I think it should become the SSR Zen garden of performance contemplation.
These ideas make it obvious you're the brains of the operation Owen.

Sent from my SM-G930F using Tapatalk

[Marshy]

These ideas make it obvious you're the brains of the operation Owen.

Never any doubt about that ;)

http://cdn.ymaservices.com/editorial_service/media/images/000/100/671/compressed/pinky%20and%20the%20brain.jpg?1436457210

[Ruckos87]

Productive day today only one photo though
Rear sub frame in, a nice bit of kit!!http://uploads.tapatalk-cdn.com/20160527/7aea5c803401429a6be31bdf20242da8.jpg
Clipons fitted, forked checked, front wheel will need to be straightened but not much, striped off the front ready for the new race stay.
Learnt heaps, was nice to have another R1 in the Garrage to look at when deciding how things should be installed ....

cheers nick, hopefully I was a good apprentice


Sent from my iPhone using Tapatalk

[Turbo]

Productive day today only one photo though
Rear sub frame in, a nice bit of kit!!http://uploads.tapatalk-cdn.com/20160527/7aea5c803401429a6be31bdf20242da8.jpg
Clipons fitted, forked checked, front wheel will need to be straightened but not much, striped off the front ready for the new race stay.
Learnt heaps, was nice to have another R1 in the Garrage to look at when deciding how things should be installed ....

cheers nick, hopefully I was a good apprentice


Sent from my iPhone using Tapatalk

Nice work, Luke!! That subframe looks ace. Just need to work on them picture taking skills!! :)

[Ruckos87]

Nice work, Luke!! That subframe looks ace. Just need to work on them picture taking skills!! :)

I've only got VERY limited skills and used all the available % today. Nothing left for photography. Hopefully I re boot over night


Sent from my iPhone using Tapatalk

[Carl-52]

Very nice subframe... i like the change in design from the r6 subframe mounts to the r1 subframe mounts... much better idea with planes of stress etc. More shear instead of a bending around the bolt now!! tops

[zoidberg]

Productive day today only one photo though
Rear sub frame in, a nice bit of kit!!http://uploads.tapatalk-cdn.com/20160527/7aea5c803401429a6be31bdf20242da8.jpg
Clipons fitted, forked checked, front wheel will need to be straightened but not much, striped off the front ready for the new race stay.
Learnt heaps, was nice to have another R1 in the Garrage to look at when deciding how things should be installed ....

cheers nick, hopefully I was a good apprentice


Sent from my iPhone using Tapatalk
That subframe looks awesome mate! I wonder if they exist for my bike...

Sent from my SM-G930F using Tapatalk

[Ruckos87]

That subframe looks awesome mate! I wonder if they exist for my bike...

Sent from my SM-G930F using Tapatalk

Isn't this your bike???


Sent from my iPhone using Tapatalk

[zoidberg]

You're a good bloke Luke. I don't care what these other people are saying about you.

Sent from my SM-G930F using Tapatalk

[Ruckos87]

Front stay on. Dash in and works! Still a tone of sensors and stuff to mount to it.
Made up a alloy platform for the battery as the OEM plastic one was goooonnnnne.
I'll need to make up a few more brackets for the batterie, and GPS gizmos and too reinforce under the seat.
Motion pro fitted ( Ta.) I was surprised at the good condition of the air filter, a new ones on order but was good enough to start her up....love that sound

Whoohoo getting there.


Sent from my iPhone using Tapatalk

[mattr6]

getting there, thought there would be more damage,

love that auto blip idea

[stevem]

Plumb , gearing commander is really good for working out gearing for each corner if you know the speed you carry thru each corner.

[Ruckos87]

Plumb , gearing commander is really good for working out gearing for each corner if you know the speed you carry thru each corner.

Cheers I'll have a look.


Sent from my iPhone using Tapatalk

[Ruckos87]

So working on the front race stay, the OEM intake was a two peice section that held a ??diaphragm in place. The new is a single piece with no preset positions.

1st question what does this gear actually do? It's connected to a fuel cut off solenoid and a tank surge.
OEM part lay out
http://uploads.tapatalk-cdn.com/20160602/2cb3bb0522e5b73578ee264bbfb49ddd.jpg
It's pretty easy to fit it up to the intake, if I install the diaphragm at the front of the new intake is that going to restrict the air flow at all? Will it serve its actual purpose?
http://uploads.tapatalk-cdn.com/20160602/7337278d43f103cc129d1a2f459dca4d.jpg

Excuse my ignorance [emoji15]






Sent from my iPhone using Tapatalk

[zoidberg]

Flux capacitor?

Sent from my SM-G930F using Tapatalk

[Ruckos87]

Flux capacitor?

Sent from my SM-G930F using Tapatalk

Now now if you can't say something nice......

I'd have thought you'd want me fixing this up good and proper [emoji848]


Sent from my iPhone using Tapatalk

[Leezx10r]

The zx10 had one for EPA noise stuff, connected to a flap on the intake.
I removed the hardware, but left the electrical nonsense so not to put any codes up.
Not sure if that help


Sent from my iPhone using Tapatalk

[zoidberg]

Now now if you can't say something nice......

I'd have thought you'd want me fixing this up good and proper [emoji848]


Sent from my iPhone using Tapatalk

http://i.imgur.com/bRDeIaC.jpg

[Ruckos87]

The zx10 had one for EPA noise stuff, connected to a flap on the intake.
I removed the hardware, but left the electrical nonsense so not to put any codes up.
Not sure if that help


Sent from my iPhone using Tapatalk

Actually there is (was) a flap on the OEM....
Food for thought Ta.


Sent from my iPhone using Tapatalk

[Turbo]

Interesting... The R6 has intake temp and pressure sensors on it's intake, I wonder if it's something along those lines?
What is part #7 called?

[Ruckos87]

Part 3 is a air temp sensor. That position was cast into the intake on the stay. The fact that there nothing cast for this other gear has me thinking Lee might be on to something. Maybe it's not needed for a race bike?
But I e really got no idea what ist for.

http://www.partshark.com/oemparts/a/yam/54fdc73187a86510e820ff29/intake-3



Sent from my iPhone using Tapatalk

[Turbo]

Yeah, I think that's right, it's for the intake flapper. It will probably chuck an error but you'll want max air at all times so no need for it.

[Ruckos87]

Consensus is its needs to go. Hopefully I'll get that and rear sets sorted on Wednesday. Then levers and it should be good for a fairing less test ride around the estate at work.



Sent from my iPhone using Tapatalk

[Ruckos87]

Rear sets on, order a couple of spares so they can go back in the kit. Tomorrow Ive got to make up a bracket to hold the Gryo in place, oem it's under the battery but I'll mount it on top cause its easer.http://uploads.tapatalk-cdn.com/20160608/31814f3f17f3f485afb01b201eda35f3.jpg
The front stay is now complete with the epa gear removed. http://uploads.tapatalk-cdn.com/20160608/211f0c34d8276f838b0f4898c82c5e17.jpg and no error codes!!

I've been looking at the tank, and although I have a tank cover to go over it I've been thinking about trying to pop it back out with compressed air. It's pretty soft, and should be a simple as hooking air up to the vent line (blocking off the others) and slowly increasing the pressure, I might slightly warm the tank 1st. It's so soft it might just pop back out.
http://uploads.tapatalk-cdn.com/20160608/574cb5652c6e969940804ac8bf671afe.jpg

Anyone see and obvious issues with this?

Tested out all the fancy settings and couldn't drill down into the main menu. I also has an error code and a front shock symbol. Looking further into it I found one of 4 wires from the electronic suspension had been severed.
http://uploads.tapatalk-cdn.com/20160608/83336c1d03d2f5cbf4b31416db4ca512.jpg
So soldered it up, and low and behold the menu worked and the error code disappeared. Peewww was sweating bullets for a bit there.


Sent from my iPhone using Tapatalk

[Turbo]

Nice progress, Luke!! Great work on finding the suspension issue too!
Can't see why the air wouldn't work. Can you seal it up to withstand that pressure?

[Leezx10r]

Agree compressed air line should work well. [emoji106]🏻


Sent from my iPhone using Tapatalk

[Ruckos87]

Can you seal it up to withstand that pressure?
Shouldn't be a problem, Ive got a few ideas, having it in a plumbing work shop I "should" be able to knock something up....



Sent from my iPhone using Tapatalk

[Ruckos87]

Street fighter anyone...
1760
I haven't done must of late with work getting in the way, but managed to fit up the gyro
1761
Finished off all the other bits n pieces and fitted a temporary seat ready for a test ride
1762
the bike rides well, straight and no error codes, God I do love this bike,
The fork will need a bit of love, as will both of the front rims actually, must have been from the initial road drop, so ill pull them out, if i can get them back for the 29th.

Oh and a Vid, because Nicks clearly still at work:whip::whip::whip:
https://youtu.be/jdWRVmLe7aM

[Ruckos87]

Quick question, I'm assuming I'll need to drill out the two break away bolts to get the ignition Barrel out, so I can take the triple with the forks for Straighting?

No easer way to do it????The wiring is run up through the frame and looks the be a pain in the ass to locate and disconnect.
http://uploads.tapatalk-cdn.com/20160704/df1690d8b6f34ad022046a292dc31168.jpg


Sent from my iPhone using Tapatalk

[Mstevo]

you could try to dremel a screwdriver slot in the head of the screw, heat up the screw to melt the loctite and try and unscrew it

[Turbo]

+1 for Mark's method. I got that to work on the R6.
Drill and easy out is another method, I had to resort to angle grinder on the BMW but there was enough space away from electrics etc.

[Ruckos87]

you could try to dremel a screwdriver slot in the head of the screw, heat up the screw to melt the loctite and try and unscrew it

Ta. Il give it a shot[emoji1303]


Sent from my iPhone using Tapatalk

[Ruckos87]

Had to drill the heads off in the end. Couldn't get enough heat in, to over come the copious amounts of lock tight... Sorted now though
Cheers again
http://uploads.tapatalk-cdn.com/20160705/5ddf2224c7d2988063e2003a0380ea4f.jpghttp://uploads.tapatalk-cdn.com/20160705/6df3ff0e2e37e53c0060bffb2a3af018.jpg


Sent from my iPhone using Tapatalk

[Turbo]

Mine were the same! It's as if they're not meant to come out!! :lol:

[Ruckos87]

Got the forks and fronts back top guys Laurie & David Alderton, so today it got re built and a little test ride. a nice big box of fairings arrived while I've been work so tomorrow morning I'll get them on,
It'll get a couple of laps to make sure everything sweet then it'll be up for sale[emoji20] going to stick with the clubsport / BEARS eligible rsv4's


Sent from my iPh

[Turbo]

It won't hang around long if WeR1 is anything to go by!! :thumb:

What did you end up doing for ignition??

[Ruckos87]

It won't hang around long if WeR1 is anything to go by!! :thumb:

What did you end up doing for ignition??

Just re installed it as stock with new bolts. Bit to much mucking around to go key less. It's got a separate key for reading faults ect so in the add I'll put
"Comes with 3 keys !!!" Lol


Sent from my iPh

[Turbo]

Ah, fair enough. That's interesting with the faults key... Do they just display on the dash??

[Ruckos87]

Ah, fair enough. That's interesting with the faults key... Do they just display on the dash??

Actually that's what my mate told me when I brought it. A quick goggle and looks like it jus for programming new keys... Whoops don't listen to mates lol


Sent from my iPh

[Ruckos87]

http://uploads.tapatalk-cdn.com/20160719/9f2de5b3dfd90b681e2b6dd097b15740.jpg
Back to her beautiful best!!!!!




Oh sold as well [emoji20] but I've got something else on the back burner


Sent from my iPh

[zoidberg]

Sold already! Well done mate.

[Ruckos87]

I just put rsv4 fairings on it so I can catch up to u...


Sent from my iPh

[Turbo]

Woah, quick sell!! Not surprised at that price mate. Well done!! :thumb:

[Marshy]

It seems to be the day for pretty bike photos! Nice mate :thumb:


Sent from my iPhone using Tapatalk

[Ruckos87]

That 5 mths went quick.sad to see her go[emoji20]
Im a bit jealous of the space in a pantech truck though [emoji33]
http://uploads.tapatalk-cdn.com/20160727/14d728d252988a1a2bf32f073baacae5.jpg


Sent from my iPh

[Marshy]

We need a TT truck, to go to interstate race meets and take all our bikes. That way we can FIFO. Hire a driver for the truck. Race in style!!

[Linden]

That 5 mths went quick.sad to see her go[emoji20]
Im a bit jealous of the space in a pantech truck though [emoji33]

That's not a truck


We need a TT truck, to go to interstate race meets and take all our bikes. That way we can FIFO. Hire a driver for the truck. Race in style!!
Bears to Darwin
TOP level
http://farm4.staticflickr.com/3826/9416034776_4908ca2d60.jpg

[Ruckos87]

We need a TT truck, to go to interstate race meets and take all our bikes. That way we can FIFO. Hire a driver for the truck. Race in style!!

This !!!!!

Edit - before I lock in I'll see how rooming with Nate goes next weekend, he worrying me with his childhood Santa issues

bahahaha


Sent from my iPh