PDA

View Full Version : Knocked up a few axle spacers...



Little Mick
31-01-2016, 04:59 PM
http://uploads.tapatalk-cdn.com/20160131/8a2936ab224caacefcefe0ea2073fbb0.jpg


http://uploads.tapatalk-cdn.com/20160131/ef3fa6e3cca105a8a53047cb51c1638b.jpg

http://uploads.tapatalk-cdn.com/20160131/20edb5a0b9c873212b596da7091299a9.jpg

http://uploads.tapatalk-cdn.com/20160131/67f336f5cba65b440098e4752188c619.jpg

Sent from my SM-N9005 using Tapatalk

chubb
31-01-2016, 05:08 PM
Oooh nice.. Make your own captive ones

Little Mick
31-01-2016, 05:11 PM
Yeah i can and will when i get a window lol. These are for the Harris to suit the cbr wheel with the new caliper mount that I made.

Sent from my SM-N9005 using Tapatalk

Little Mick
31-01-2016, 05:14 PM
I can knock up captives in aluminium if anyone is after a set. Will need dimensions of your existing ones as a base. Drop me a pm if interested

Sent from my SM-N9005 using Tapatalk

Turbo
31-01-2016, 05:23 PM
http://uploads.tapatalk-cdn.com/20160131/ef3fa6e3cca105a8a53047cb51c1638b.jpg



Nice work, mate!! :thumb:
What's the lubricant/coolant stuff? Can you buy it in a spray can?
I've only ever seen it on industrial type lathes etc.

Little Mick
31-01-2016, 06:24 PM
Its soluble cutting oil. You can use kero in an old sauce bottle and trickle it on ir sone people use WD40 if you dont have a coolant system on yiur machine. Parting off requires it as does rurning of a fee materials depending on the tooling you use.

Sent from my SM-N9005 using Tapatalk

Turbo
31-01-2016, 06:39 PM
Its soluble cutting oil. You can use kero in an old sauce bottle and trickle it on ir sone people use WD40 if you dont have a coolant system on yiur machine. Parting off requires it as does rurning of a fee materials depending on the tooling you use.


Thanks mate. I've always found WD40 a bit too thin and it seems to evaporate off pretty quickly.
I'll have a look into the cutting oil.

Little Mick
31-01-2016, 06:40 PM
Thanks mate. I've always found WD40 a bit too thin and it seems to evaporate off pretty quickly.
I'll have a look into the cutting oil.
Should be able to get it from most engineering places like gasweld and blackwoods

Sent from my SM-N9005 using Tapatalk

Carl-52
01-02-2016, 10:07 AM
Just get the pukka legit cutting fluid. It makes for a better job and longer lasting tools. http://www.cedray.com.au/ this place in silverwater is the bomb ive found since i started working at my engineering internship. Also Austain fasteners if you need stainless bits and bobs. If using hand tools and drilling etc use some thicker Metal Cutting Compound, it applies like a grease and provides the lubrication and cooling you need.

dan
23-02-2016, 09:53 PM
Very nice!


Sent from my iPhone using Tapatalk