Air intake question CBR 600

[Ruckos87]

More question from me...[emoji4]
I've replace the front fairing stay bracket with a race stay, but can't remember if the air intakes pictured http://images.tapatalk-cdn.com/15/07/16/b0a6d796c22c83db7c129fda9ad38d74.jpghttp://images.tapatalk-cdn.com/15/07/16/b11ef4061c4b962240968d74ee40eca4.jpg were covered by the OEM bracket. I wouldent thing it should be open, if I closed them Id get better air ram so to speak. But thought I'd check with the TT brains trust.

Cheers Luke


Sent from my iPhone using Tapatalk

[Marshy]

Doesn't look right. Calling BoB, the resident expert in all things CBR600RR......

[BoB]

With the race stays , you usually get some blanking plates that fit over the holes . The oem stays fit into these holes . I will get some pics and put them up for you .

[Ruckos87]

With the race stays , you usually get some blanking plates that fit over the holes . The oem stays fit into these holes . I will get some pics and put them up for you .

Awesome, cheers.
the stay was a 2nd hand purchase, so just came on its own. I'll prob knock something up out of PVC once I see your pics. I diddent think it looked quite right.



Sent from my iPhone using Tapatalk

[BoB]

Attached are a few pics , showing the oem set up with the clock mount bracket which blanks off these holes . Next the underside of the oem clock bracket . The blanking plates that bolt on to the ram air. If you don't have the blanking plates you can just fibreglass them up as in the last pic.

1337133813391340

[BoB]

Awesome, cheers.
the stay was a 2nd hand purchase, so just came on its own. I'll prob knock something up out of PVC once I see your pics. I diddent think it looked quite right.

Sent from my iPhone using Tapatalk

Even some ice cream container cut out and stuck over will work , all depends on how much time you want to spend prettying it up . For the race bike I went with the aluminium fairing stay from SES which comes with the ram air , not cheap but gives you a bit more room to mount things and a bit stronger than the oem ram air.

1341

[Ruckos87]

I like the fibre glass but I reccon I'll run out of time between now and my next track day. Still got a bit to get it rideable.
I've got PVC plumbing fittings around that should fit over with a little bit of modificatuon and I'll sica them on. Should do the trick.
Cheers mate.


Sent from my iPhone using Tapatalk